|
|
SKB SKB3I-0907-6B-C Small Military Standard Case 6''
Waterproof with Cubed Foam
| Price: | $139.00 | NZD Inc. GST |
1 in stock
Ships today from Wellington
The SKB 3I-0907-6-C Small Mil-Std Waterproof Case 6" Deep (Black) is an injection molded ultra high-strength polypropylene copolymer resin case. It features a gasketed, water- and dust-tight, submersible design that is resistant to UV, solvents, corrosion, fungus and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, "trigger release" latch system, a comfortable, snap-down rubber over-molded cushion-grip handle, and an automatic ambient pressure equalization valve. The case is lockable with a customer supplied padlock.
This case has a cubed foam interior.
Features:
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Layers of cubed foam for customization
• Locking loops to accept a customer supplied lock
Certifications:
• ATA (Air Transport Association) category 1 rated
• MIL-STD-810F Military specification for resistance to UV, solvents, corrosion, fungus and impact damage
• MIL-STD-C-4150J Military specification for waterproof and water-vapor proof cases for transit and storage
• IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m
• MIL-STD-648C Military specification for automatic ambient pressure equalization valve
• Trigger release latch system is lockable with a customer supplied padlock
• Continuous molded-in hinge for added protection
• Temperature rating = -40 to +160°F (-40 to +71.11°C)
• Snap-down rubber over-molded cushion grip handle
Specifications:
Material: Exterior: Ultra high-strength polypropylene copolymer resin
Interior: 1.0" thick cubed foam, 3/4" dye cut squares
Type of Closure: Trigger release latch system
Lockable with a customer supplied padlock
Continuous molded-in hinge for added protection
Exterior Dimensions: 10.75 x 9.5 x 7.0" (27.31 x 24.13 x 17.78cm) (LxWxD)
Interior Dimensions: Lid Depth: 1.25" (3.18cm)
Base Depth: 5.0" (12.7cm), 9.5 x 7.25 x 6.25" (24.13 x 18.42 x 15.88cm) (LxWxD)
Volume: Exterior space: 0.41 ft³ (0.01 m³)
Interior space: 0.25 ft³ (0.007 m³)
Interior Fitting: 1.0" thick cubed foam, 3/4" dye cut squares
Accommodates: Gear that needs protection from water and dust
Carrying/Transport Options: Snap-down cushion grip handle
This case has a cubed foam interior.
Features:
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Layers of cubed foam for customization
• Locking loops to accept a customer supplied lock
Certifications:
• ATA (Air Transport Association) category 1 rated
• MIL-STD-810F Military specification for resistance to UV, solvents, corrosion, fungus and impact damage
• MIL-STD-C-4150J Military specification for waterproof and water-vapor proof cases for transit and storage
• IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m
• MIL-STD-648C Military specification for automatic ambient pressure equalization valve
• Trigger release latch system is lockable with a customer supplied padlock
• Continuous molded-in hinge for added protection
• Temperature rating = -40 to +160°F (-40 to +71.11°C)
• Snap-down rubber over-molded cushion grip handle
Specifications:
Material: Exterior: Ultra high-strength polypropylene copolymer resin
Interior: 1.0" thick cubed foam, 3/4" dye cut squares
Type of Closure: Trigger release latch system
Lockable with a customer supplied padlock
Continuous molded-in hinge for added protection
Exterior Dimensions: 10.75 x 9.5 x 7.0" (27.31 x 24.13 x 17.78cm) (LxWxD)
Interior Dimensions: Lid Depth: 1.25" (3.18cm)
Base Depth: 5.0" (12.7cm), 9.5 x 7.25 x 6.25" (24.13 x 18.42 x 15.88cm) (LxWxD)
Volume: Exterior space: 0.41 ft³ (0.01 m³)
Interior space: 0.25 ft³ (0.007 m³)
Interior Fitting: 1.0" thick cubed foam, 3/4" dye cut squares
Accommodates: Gear that needs protection from water and dust
Carrying/Transport Options: Snap-down cushion grip handle
| Product: | SKB SKB3I-0907-6B-C Small Military Standard Case 6'' |
| Manufacturer: | SKB |
| Model: | SKB3I-0907-6B-C |
| SKU: | SKB3I-0907-6B-C |
| RM Product #: | 3943 |
