AJA
AJA KONA 4 8-Lane PCI-E2 A/V Desktop I/O Card
- Supports 4K Video up to 60 fps.
- 4K I/O Via SDI or HDMI.
- Uncompressed 4:4:4/4:2:2 1080p I/O.
- Input/Output 1080p Video Simultaneously.
- Hardware Up/Down/Cross-Conversion.
Usually ships in 3 - 4 weeks
You Pay:
$5,340.00
AJA 1-Channel Single-Mode LC Fiber to 12G-SDI Receiver
- 1-Channel Single-Mode LC Fiber to 12G-SDI Receiver.
- Simplex connection (LC connector).
- 12G-SDI output, which also supports 6G/3G/HD/SD-SDI.
- Second SDI output (DA: same signal).
- Dual, matching SDI outputs.
- Uses 5-20VDC power (DWP-U-R1 universal power supply included).
Usually ships in 3 - 4 weeks
You Pay:
$2,225.00
AJA SMPTE ST 2110 IP to HDMI Mini-Converter
- Decodes SMPTE 2110 Signals over 10 GigE.
- Formats Data for Monitoring and HDMI Out.
- Two 10 GigE SFP+ Cages/Hitless Switching.
- Up to 1080p60 10-Bit 4:2:2 Uncompressed.
- Embedded and Analogue RCA Audio Output.
Usually ships in 3 - 4 weeks
You Pay:
$3,630.00
AJA SMPTE ST 2110 IP to SDI Mini-Converter
- Decodes SMPTE 2110 Signals over 10 GigE.
- Formats Data for Monitoring and SDI Out.
- Dual 3G-SDI Outputs with Mirrored Video.
- Two 10 GigE SFP+ Cages/Hitless Switching.
- Up to 1080p60 10-Bit 4:2:2 Uncompressed.
Usually ships in 3 - 4 weeks
You Pay:
$3,955.00
AJA IPT-10G2-HDMI HDMI to SMPTE ST 2110 Video & Audio Converter
- HDMI Input to SMPTE ST 2100 IP Output.
- Supports up to 1080p60, 4:2:2, 10-Bit.
- 1 x HDMI Type A 1.4b Input.
- 2 x 10 GbE SFP+ Cages.
- Hitless ST 2022-7 Switching.
Usually ships in 3 - 4 weeks
You Pay:
$3,630.00
AJA IPT-10G2-SDI 3G-SDI to SMPTE ST 2110 IP Mini-Converter
- 3G-SDI Input to SMPTE ST 2110 IP Output.
- Supports up to 1080p60, 4:2:2, 10-Bit.
- 1 x 3G-SDI Input, 1 x 3G-SDI Loop-Out.
- 2 x 10 GbE SFP+ Cages.
- Hitless ST 2022-7 Switching.
Usually ships in 3 - 4 weeks
You Pay:
$3,955.00
AJA P-TAP-CBL DC Cable (45cm)
- DC Power Cord.
- Length - 45cm.
- P-Tap to AJA D5/10-PC Connector.
Usually ships in 3 - 4 weeks
You Pay:
$170.00
AJA RMB-RO Rackmount Bracket
- D & HD Series Mini Convertors.
- Rackmount Kit.
Usually ships in 3 - 4 weeks
You Pay:
$35.00
AJA D510PC Power Plug Assembly
- Use with D Series Convertors.
- Use with D4, D5, D10.
- Complete Power Plug Assembly.
Usually ships in 3 - 4 weeks
You Pay:
$35.00
AJA Single Multi-Mode LC 3G Fiber Receiver SFP
- SFP Module for FiDO Mini-Converters.
Usually ships in 3 - 4 weeks
You Pay:
$845.00
AJA Single Multi-Mode LC 3G Fiber Transmitter SFP
- SFP Module for FiDO Mini-Converters.
Usually ships in 3 - 4 weeks
You Pay:
$845.00
AJA Pak 256GB SSD Module (exFAT)
- Preformatted for exFAT.
- Compatible with CION Production Camera.
- Compatible with Ki Pro Ultra/Ki Pro Quad.
Usually ships in 3 - 4 weeks
You Pay:
$1,585.00
AJA openGear 1x9 3G-SDI Reclocking DA
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Input: 1x 3G-SDI BNC.
- Outputs: 9x 3G-SDI BNC.
- Support for HDR – High Dynamic Range video.
- Monitor via openGear DashBoard.
- Passes embedded audio, all ancillary data including closed caption and time code.
- Input Present and Input SMPTE Lock LEDs.
- Automatic input equalization and output reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Power: 2.5 watts max per card.
- Hot swappable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,405.00
AJA 2x4 3G-SDI Reclocking Distribution Amplifier Card
- 3G-SDI openGear Distribution Amplifier.
- 2 x SDI BNC Inputs, 8 x SDI BNC Outputs.
- Embedded Audio, HDR Video Support.
- Format Agnostic 150 Mb/s to 3 Gb/s Video.
- Reclocking for Distribution up to 1148'.
Usually ships in 3 - 4 weeks
You Pay:
$1,565.00
AJA KONA 1-S Short 3G-SDI 2K Capture & Playback Card
- 1-Ch 3G-SDI 2K/HD 60p Capture & Playback.
- Short, Low-Profile Version for Developers.
- Selectable HD/SD Reference/LTC Input.
- Simultaneous Monitoring During Capture.
- Mac/Win/Linux 2-Lane PCIe 2.0 Compatible.
Usually ships in 3 - 4 weeks
You Pay:
$1,775.00
AJA openGear 1-Channel 3G-SDI/LC Single Mode LC Fiber Transceiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber.
- Outputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1260-1620 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 2-Channel 3G-SDI to Single Mode LC Fiber Transmitter with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x Independent 3G-SDI Inputs, BNC connectors.
- Outputs: 2x Independent single mode optical fiber, LC connectors.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and re-clocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- All other rates are passed through and not reclocked.
- Wavelength: 1310 nm.
- Optical Power: -5dBm (min), 0dBm (max).
- Power: 2.5 watts.
- Hot-swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 2-Channel Single Mode LC Fiber to 3G-SDI Receiver with Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x Single Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1260-1620 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 1 Channel 3G-SDI to Multi-Mode LC Fiber Transmitter
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x 3G-SDI with SDI Loop out.
- Outputs: 1x 3G-SDI BNC Output; 1x Multi-Mode LC Fiber Output.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00
AJA openGear 1-Channel Multi-Mode LC Fiber to 3G-SDI Receiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Input: 1x Multi-Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC Outputs (Mirrored).
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00
AJA openGear Dual 1x4 12G-SDI Distribution Amplifier
- Dual 1x4 12G-SDI openGear Distribution Amplifiers.
- 2x 12G-SDI BNC inputs.
- 8x noninverting 12G-SDI BNC outputs.
- Format agnostic 270 Mbps – 12 Gbps video formats.
- Automatic input equalisation and output reclocking.
- Support for HDR video.
- Passes embedded audio, all ancillary data including closed caption and time code.
- Input Present and Input SMPTE Lock LEDs.
- 10x 12G-BNC rear connector module included.
- Power: 4.5 watts.
- Hot swappable.
- DashBoard Support with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00
AJA openGear 3G-SDI 8-Channel 24-bit AES Embedder/Disembedder with DashBoard Support
- Video Formats: 3G-SDI.
- 3G-SDI Embedder / Disembedder in one board.
- Input: 1x 3G-SDI BNC.
- Outputs: 1x 3G-SDI BNC.
- 4x AES BNC (2 channels per input).
- Local and Remote modes.
- Incoming embedded audio passed, removed, or overridden.
- Configure via openGear DashBoard, or DIP switch.
- Power: 5.0 watts.
- Hot swappable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,245.00
AJA openGear 1-Channel 3G-SDI/LC Multi-Mode LC Fiber Transceiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x3G-SDI BNC; 1x Multi-Mode LC Fiber.
- Outputs: 1x 3G-SDI BNC; 1xl Multi-Mode LC Fiber.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,495.00
AJA openGear 2-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x 3G-SDI BNC.
- Outputs: 2x Multi-Mode LC Fiber.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,495.00
AJA openGear HDMI to 3G-SDI Scan Converter
- HDMI to 3G-SDI conversion.
- Frame Rate Conversion.
- Conversion between Deinterlace and Progressive signals.
- Region of Interest scaling.
- HDMI input with loop-through.
- Accepts input HDMI formats up to 1920 x 1200p 60 Hz.
- Configurable SDI output formats from 525i 29.97 to 1920 x 1080p 60 Hz.
- Aspect ratio conversion and image flip/rotation.
- 2-channel embedding of balanced analog audio inputs or 8 channel HDMI audio.
- Rear connector module included.
- 2x 3-Pin Terminal Block connectors (included).
- Reference Source (Free Run, Card Ext, OG Frame Ext Ref 1 & 2).
- Genlock input.
- Hot-swappable.
- Controlled by DashBoard network control software.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,800.00
AJA openGear DVI to 3G-SDI Scan Converter
- DVI to 3G-SDI conversion.
- Frame Rate Conversion.
- Conversion between Deinterlace and Progressive signals.
- Region of Interest scaling.
- DVI input with loop-through.
- Accepts input DVI formats up to 1920 x 1200p 60 Hz.
- Configurable SDI output formats from 525i 29.97 to 1920 x 1080p 60 Hz.
- Aspect ratio conversion and image flip/rotation.
- 2-channel embedding of balanced analog audio inputs or 8 channel DVI audio.
- Rear connector module included.
- 2x 3-Pin Terminal Block connectors (included).
- Reference Source (Free Run, Card Ext, OG Frame Ext Ref 1 & 2).
- Genlock input.
- Hot-swappable.
- Controlled by DashBoard network control software.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,800.00
AJA 2-Channel Single-Mode LC Fiber to 12G-SDI Receiver
- 2-Channel Single-Mode LC Fibre to 12G-SDI Receiver.
- 2 simplex or 1 duplex connection (LC connector).
- 2 independent channels of 12G-SDI output, which also support 6G/3G/HD/SD-SDI.
- Both Fibre-to-SDI paths are completely independent.
Usually ships in 3 - 4 weeks
You Pay:
$3,730.00
AJA 2-Channel 12G-SDI to Single-Mode LC Fiber Transmitter
- 2 simplex or 1 duplex connection (LC connector).
- 2 independent channels of 12G-SDI inputs, which also support 6G/3G/HD/SD-SDI.
- Both SDI-to-Fiber paths are completely independent.
Usually ships in 3 - 4 weeks
You Pay:
$3,730.00
AJA Hi5-12G-R-ST 12G-SDI to HDMI 2.0 Mini-Converter with ST Fiber Receiver
- Provides a monitoring connection
- 12G-SDI single link input
- Ships with a Fiber ST
- Uses 5-16 VDC power
- USB port used with Mini-Config software
Usually ships in 3 - 4 weeks
You Pay:
$3,090.00
AJA T-TAP Pro Thunderbolt 3 HDMI 2.0 and 12G-SDI Output
- 1x 12G-SDI BNC with 16-channel embedded audio
- 1x HDMI 2.0 with 8-channel embedded audio
- 1x Thunderbolt 3 connector
- PQ, HLG and HDR10 Support
- HDR Metadata Auto Playback Detection
Usually ships in 3 - 4 weeks
You Pay:
$2,470.00
AJA Pak PAK512-X3 2512GB SSD Module (exFAT)
- Preformatted for exFAT.
- Compatible with CION Production Camera.
- Compatible with Ki Pro Ultra/Ki Pro Quad.
Usually ships in 3 - 4 weeks
You Pay:
$2,675.00
AJA PAK1000-X3 Pak 1TB SSD Module (exFAT)
- Preformatted as exFAT
- Can Be Reformatted
- Enterprise-Level Media
- Compatible with Ki Pro Ultra/Ki Pro Quad
- Compatible with CION Production Camera
Usually ships in 3 - 4 weeks
You Pay:
$4,000.00
AJA PAK1000-R3 PAK 1TB SSD Module (HFS+)
- Preformatted as HFS+
- Can Be Reformatted
- Enterprise-Level Media
- Compatible with Ki Pro Ultra/Ki Pro Quad
- Compatible with CION Production Camera
Usually ships in 3 - 4 weeks
You Pay:
$4,000.00
AJA KONA-LHE R0-S03 HD-SDI/Analog Video Capture and Playback PCI Card
- 10-bit or 8-bit uncompressed video
- Supports 12-bit analog component HD input & output
- Extensive editing software support
- Supports RS-422 machine control via 9-pin connector
Usually ships in 3 - 4 weeks
You Pay:
$2,675.00
AJA KONA-LHE R0-S02 HD-SDI/Analog Video Capture and Playback PCI Card with breakout cable
- Versatile I/O
- Integrated AJA hardware conversion
- Extensive software support
- Extend your Connectivity with KL-Box-LH
Usually ships in 3 - 4 weeks
You Pay:
$2,800.00
AJA KONA-LHE R0-S00 HD-SDI/Analog Video Capture and Playback PCI Card/board only
- Versatile I/O
- Integrated AJA hardware conversion
- Extensive software support
- Extend your Connectivity with KL-Box-LH
Usually ships in 3 - 4 weeks
You Pay:
$2,620.00
AJA OpenGear 12G-SDI/LC Single Mode LC Fiber Transceiver
- Video Formats: 270 Mbps - 12 Gbps, format agnostic
- Inputs: 1x 12G-SDI BNC; 1x Single-Mode LC Fiber Connectors
- Outputs: 1x 12G-SDI BNC; 1x Single-Mode LC Fiber Connectors
- Monitor via openGear DashBoard
- Support for HDR - High Dynamic Range video
Usually ships in 3 - 4 weeks
You Pay:
$3,730.00
AJA OpenGear OG-12GM 12G-SDI Muxer/DeMuxer
- openGear compatible card
- Single 12G-SDI to/from Quad 3G-SDI Level A
- Single 12G-SDI to/from Quad 3G-SDI Level B-DL
- Single 6G-SDI to/from Quad 1.5G-SDI
- Quad 3G-SDI Level A to/from Quad 3G-SDI Level B-DL
Usually ships in 3 - 4 weeks
You Pay:
$2,675.00
AJA 120/240 AC to 12V DC 1.3mm barrel plug for use with KiStor modules
Available to order today
Usually ships in 3 - 4 weeks
You Pay:
$105.00
AJA CRV44-S-NF 8-lane PCIe 2.0, 4 x SDI (Fanless Version, Low Profile)
- PCIe Express Gen 2.0 8-lane
- Up to four independent* channels 3G, HD, SD-SDI I/O
- All SD/HD/2K x 1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats
- 2 independent Mixer/Keyer widgets.
- 4 independent 16-channel 48 kHz SDI embedded audio I/O engines
- Analog Color Black or HD Tri-Level Sync
Usually ships in 3 - 4 weeks
You Pay:
$5,315.00
AJA CRV44-BNC-R0 Flexible Multi-Format I/O
- PCIe Express Gen 2.0 8-lane
- Up to four independent* channels 3G, HD, SD-SDI I/O
- All SD/HD/2K x 1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support.
- 8/10-bit YCbCr and 12-bit RGB frame buffer formats
- 2 independent Mixer/Keyer widgets
Usually ships in 3 - 4 weeks
You Pay:
$5,315.00
AJA CRV44-BNC-NF 8-lane PCIe 2.0, 4 x SDI on Full Size BNC (Fanless Version)
- PCIe Express Gen 2.0 8-lane
- Up to four independent channels 3G, HD, SD-SDI I/O(Channels must use the same master clock. Eg, 29.97 and 59.94)
- All SD/HD/2Kx1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support.
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats
- Two independent Mixer/Keyer widgets
Usually ships in 3 - 4 weeks
You Pay:
$5,315.00
AJA OG-DANTE-12GAM OpenGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder
- Support for 12G/6G/3G-SDI audio embedding to- and from- the Dante audio ecosystem
- Dual, and independent 12G-SDI Input and Output ports, each supporting 16-audio channels, totaling 64-channels per card in a compact design
- 1x Primary and 1x Secondary Gigabit Ethernet ports for Dante network redundancy
- 64-channels of simultaneous SDI/Dante audio bridging per card
Usually ships in 3 - 4 weeks
You Pay:
$6,675.00
AJA CRV44-T-NF 8-Lane Pcie 2.0, 4x SDI, Independently Configurable (Fanless Version)
- PCIe Express Gen 2.0 8-lane
- Up to four independent* channels 3G, HD, SD-SDI I/O
- All SD/HD/2K x 1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats
- 2 independent Mixer/Keyer widgets.
- 4 independent 16-channel 48 kHz SDI embedde
Usually ships in 3 - 4 weeks
You Pay:
$5,315.00
AJA CRV44-T-NCF 8-Lane Pcie 2.0, 4x SDI, Independently Configurable (Fanless Version)
- PCIe Express Gen 2.0 8-lane
- Up to four independent* channels 3G, HD, SD-SDI I/O
- All SD/HD/2Kx1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support.
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats
Usually ships in 3 - 4 weeks
You Pay:
$5,050.00
AJA CRV44-T-NC1 Standard-Profile 8-Lane PCIe, 4x SDI Independently Configurable (No Cable)
- PCIe Express Gen 2.0 8-lane
- Up to four independent* channels 3G, HD, SD-SDI I/O
- All SD/HD/2K x 1080/4K video formats
- 3G input/output for High Frame Rate (HFR) support
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats
- 2 independent Mixer/Keyer widgets.
Usually ships in 3 - 4 weeks
You Pay:
$5,050.00
You Pay:
$4,800.00
AJA Pak 2TB SSD Module (HFS+, Mac)
- Reliable SSD Recording Media HFS+ Storage Module
Usually ships in 3 - 4 weeks
You Pay:
$4,800.00
AJA Annual Maintenance License for Bridge Live
- Annual Maintenance License for Bridge Live
Usually ships in 3 - 4 weeks
You Pay:
$4,375.00
AJA KONA 4 4K, 2K, 3G/Dual-Link HD/HD/SD 10-Bit PCIe Card
- KONA 4's extensive 4K support allows output directly from editing systems to 4K projectors or monitors
- KONA 4 has the power to support 4K High Frame Rate (HFR) at 50p and 60p for the most demanding 4K and UHD workflows
Usually ships in 3 - 4 weeks
You Pay:
$6,720.00