(no ratings yet) Thanks for your rating!
AVPro Edge 70m HDR HDMI Receiver for AC-MX88-HDBT & AC-MX44-HDBT Matrix SwitchersProduct #60981 | SKU AC-EX70-444-RNE |(no ratings yet) Thanks for your rating!
- HDMI 2.0 (a/b)
- 18Gbps Bandwidth Support (Using ICT)
- Slim Design to hide behind display
- Up to 4K60 4:4:4 Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- 4K --> 1080P Down-scaling for mixed systems
- EDID Management and EDID emulateHDCP 2.2 (and all earlier versions supported)
- CEC Pass Through
- 3D Support
The AVPro Edge 70m HDR HDMI Receiver for AC-MX88-HDBT & AC-MX44-HDBT Matrix Switchers' slim design and rich features make this small unit the perfect solution for HDR Distribution. Using standard category you are able to distribute a 18Gbps signal up to 70 meters. Utilizing ICT (Invisible Compression Technology) we have achieved what was thought to be impossible. We can deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR Metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and colour shifting.
Invisible Compression Technology
ICT is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavours of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, colour spaces and HDMI Deep Color up to 12 Bit. Our technology is unique because it is truly invisible. It is not only invisible to the human eye, it is invisible to HDMI test gear and other sink devices, what comes in is what goes out. What makes ICT special is that we preserve HDR Metadata and colour information and depth in its full, original, integrity. Other compression technologies sacrifice these to save space and it will cause very visible banding, colour shifting and motion artifacts in the image.
This technology is backed by extensive testing in side by side comparisons of ICT vs direct connected sources. The setup is two identical displays and a single source. The source is split and sent to both displays, one using ICT and one with an 18Gbps cable. The movie is shown in HDR and evaluators are brought into determine which one is compressed. The results are conclusive, it is invisible. Even to the most trained eye.
Extend 4K 60 4:4:4 and HDR Signals
The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-6A cables are available widely and can be reworked easily by the installer or end-user. Additionally, using CAT cable allows the user to change components as technology changes. By using AC-EX70-444-RNE, the transmission distance for HD 1080P is up to 100 meters (330’) and UHD, 4K resolution the distance reaches an impressive 70 meters (230’).
The AC-EX70-444-RNE has a scaling circuit built into the transmitter. The scaler can scale 4K (and HDR) --> 1080P. A common application for this is when you have a 4K distribution and you have one or two displays that are older. You can use the extender to scale down where you need to and not have to reduce the entire system. The AC-EX70-444 does the heavy lifting, eliminating the need to add additional boxes. This is an ideal choice for extension for projects requiring an 18G matrix like the AC-MX1616-AUHD.
Total EDID Management
The AC-EX70-444-RNE works has robust EDID control. EDID management allows you to manage the input device and request specific video resolutions and/or audio codecs. the following EDID options are available:
- EDID Bypass
- 1080P 2CH Audio
- 1080P 8CH Audio
- 4K60 4:2:0 2CH Audio
- 4K60 4:2:0 8CH Audio
- 4K60 4:4:4 HDR 2CH Audio
- 4K60 4:4:4 HDR 8CH Audio
- USER EDID – EDID Copy
The EDID Copy Function allows you to copy and save from any display or projector you want to.
On Board Troubleshooting
This unit allows you to generate a 1080P or 4K test pattern to identify external problems (source, repeater, displays, etc...). You can now be sure that your wiring is correct and get to the bottom of problems quickly should they arise, without having to worry if the source or sink is working properly. You can generate a test pattern from the Tx or the Rx so you can verify total system infrastructure integrity.
AC-EX70-444 features HDMI signal equalization and amplification. This allows for a “daisy chain” of AC-EX70-444 extenders for extremely long-distance transmission. With our unique bi-directional power, there is no need for a power source where the Rx and Tx meet up in a daisy chain, simply power the first Tx and the second Rx and power will be provided to the middle remotely.
IR & RS232 Management
IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa. In addition you can use the I-PASS port to plug you Control System emitter ports directly into the IR (I-PASS) port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, our unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the electronics inside
- Point to point HDMI extension – flat panel in BR# 1 to STB in basement – makes for a very clean install.
- As an add-on to any matrix switch up to 18G for long distance zone coverage.
- To carry the control signals (IR/RS232) for third-party control integration for turning components on and off and switching channels, etc.
- For retrofit jobs where there is category cable already run and re-engineering is not an option.
- Cascade for ultra long distances
|Video Resolutions||Up to 4K 60Hz 4:4:4|
|VESA Resolutions||Up to DCI 4K (4096x2160)|
|HDR Formats/Resolutions||420, 422, 444 (10 and 12 Deep Color)
HDR10, HDR10+, HLG
|Color Space||YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)|
|Chroma Subsampeling||4:4:4, 4:2:2, 4:2:0 Supported|
|Deep Color||Up to 16 bit (1080), Up to 12 bit (4K)|
|Audio Formats Supported HDMI||PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos|
|Audio Formats Supported Extracted (2CH Port)||PCM 2 CH (No Downmix)|
|HDBaseT (CAT) Distance (4K)||70M|
|HDBaseT (CAT) Distance (Full HD)||100M|
|HDMI Lead Out (up to 4K60 4:4:4)||Up to 15m (using Bullet Train HDMI)|
|HDMI Lead Out (w/ AOC Cable) (up to 4K60 4:4:4)||Up to 40m (using Bullet Train AOC)|
|Bandwidth||18 Gbps (w/ ICT)|
|HDCP||HDCP 2.2 and earlier|
|Audio (Extracted Analog)||3 pin terminal block (unbalanced) each|
|IR Rx||3.5mm Stereo (3 Conductor) each|
|RS232||3 pin terminal block each|
|Power||2 pin terminal block each|
|Operating Temprature||-5 to 51°C|
|Storage Temperature||-20 to 60°C|
|Humidity Range||5-90% RH (No Condensation)|
|Power Consumption (Total)||9 Watts Max Pair|
|Power Supply||Input: AC 100-240V ~ 50/60Hz
Output: DC 48V .5A (Wall Version)
|Dimensions||132 x 100 x 18mm|
|Dimensions (Packaged Length/Width/Height)||137 x 194 x 45mm|
In The Box
- AC-EX70-444-RNE (Receiver)
- 1 x IR Tx Unit
- 1 x IR Rx Unit
- 2x 3 Pin Terminal blocks for Audio and RS232 Ports
- Mounting Ears
Reviews(no ratings yet)
Give it a quick rating:
Thanks for your rating!
Write a review