AVPro Edge Cloud 9 High Definition Loop Mass Media Matrix
Features
- Fully uncompressed video
- Instant Matrix Switching w/ AIMS Technology
- 9-Source, Unlimited Outputs
- Robust HDBaseT Technology
- 3x3, 2x2 and custom Video Walls
- Matrixable Quad View (Matrix each quadrant independently)
- 9-Source Multiview
- Dynamic Video Walls with PC software or Control System
Description
AVProEdge Presents a stable alternative to HDMI over IP with Cloud 9. The AVPro Edge Cloud 9 High Definition Loop Mass Media Matrix is a unique piece of technology that allows you to take 9 inputs and distribute them to almost limitless outputs by adding or stacking additional units. Get all of the stuff you love from AV over IP and more with none of the headaches. Features include matrixing Quad-View, 9-Source Multiview, Actual Instant Matrix Switching (AIMS), IR & RS232 control of the displays, and more.
Utilizing uncompressed HDBaseT Technology, this system will truly shine and give you actual lossless images on screen and perform more reliably, making it ideal for low-no maintenance setups. No network switch is required, making this solution a very quick and efficient installation option in larger AV systems. In addition, you will have access to dual, front panel, colour screens to further simplify the setup process. One screen is for Source Preview and the other is used for Settings.
For control, the Could 9 features a host of ready made 3rd party control drivers (C4, RTI, Crestron, ELAN) along with a robust API for universal implementation. Turn key control systems available. Additionally, with Rout-able IR & RS232 you can control the displays (Power on, power off) with by using same HDBaseT CAT cable runs already in place.
Features
- Beautiful, Uncompressed Video
- Instant Matrix Switching w/ AIMS Technology
- 9-Source, Unlimited Outputs
- Robust HDBaseT Technology
- Matrixable Quad View
- 9-Source Multiview
- Dynamic Video Walls with PC software or Control System
- Dual Color LCD Screens for Setup
- Instantly jump from Multiview/Quadview to Single image
- IR, RS-232, or Ethernet Control
- IR, RS-232 Pass through to HDbaseT Receivers (Displays/Projectors)
- Advanced RS-232 Routing to single outputs
- 4 port IR Matrix
- Free PC Control Software (Serial)
- Web Interface for control and setup
- FPGA Based hardware
- HDBaseT Lossless Video Transport
- Instant, seamless switching of sources and into and out of Multiview mode (Or Video Wall Mode)
- Digital (Coax) audio extraction with 3 operational modes. Fixed to Inputs, Follows Outputs, and Independent Matrix.
- HDMI Audio Selection/Martix in Quad View & 9 screen Multiview
- 9 HDMI Inputs & Loop Outputs
- 9 HDBaseT Outputs (Can cascade for more)
- Full HD (1920x1080P 60Hz)
- Supports legacy formats (1080i, 720p, 480i/p, and more)
- HDCP 1.4 and earlier supported
- HDCP 2.2 (with AC-SC1-AUHD)
- Up to 70m (230ft)
- PoH Receivers, no power supplies needed for receivers.
- Single UTP/STP LAN cable (CAT-5E/6A) for all signals
- Transfer IR & RS-232 signals from Matrix to Rx
- 3-20v protection circuit built in for safe IR transport
- Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI.
- Can Cascade for massive distributions
Specifications
Video | |
Video Resolutions | Up to 1080P 60, Uncompressed Full HD |
VESA Resolutions | Up to 1900x1200 |
HDR Resolutions | 1080 Formats Only |
Color Space | YUV, RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
Chroma Subsampeling | 4:4:4, 4:2:2, 4:2:0 Supported |
Deep Color | Up to 12 bit |
Audio | |
Audio Formats Supported HDMI | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos |
Audio Formats Supported Extracted (Coax) | PCM 2.0 Ch, LPCM 5.1, Dolby Digital 5.1, DTS |
Audio Extraction Location | Input, Output or Matrix (Independent) |
Distance | |
HDBaseT outputs | 70M |
HDMI In/Out | Up to 15m |
Other | |
Bandwidth | 9 Gbps |
HDCP | HDCP 1.4 and Earlier (2.2 w/ AC-SC1-AUHD) |
Ports | |
HDMI | Type A |
HDbaseT | RJ45 |
LAN | RJ45 w/ Web Interface/Control |
Audio (Extracted) | Digital Coax |
IR Tx | 3.5mm Mono (2-Conductor) |
IR Rx | 3.5mm Stereo (3 Conductor) |
RS232 | 3 pin terminal block |
Environmental | |
Operating Temprature | -5 to 51°C |
Storage Temperature | -20 to 60°C |
Humidity Range | 5-90% RH (No Condensation) |
Power | |
PoH for HDBT Rx's | Yes |
Power Consumption (Total) | 105 Watts |
Power Supply - Matrix | Input: AC 100-240V ~ 50/60Hz Output: DC 12V 5A |
Power Supply - PoH | Input: AC 100-240V ~ 50/60Hz Output: DC 48V 3A |
Dimensions | |
Dimensions (Unit Only Height/Depth/Width) | 50.8 x 260.35 x 441.33mm |
Dimensions (Packaged Height/Depth/Width) | 88.9 x 444.5 x 495.3mm |
Weight (Unit) | 4.98kg |
Weight (Packaged) | 6.35kg |
In The Box
- AC-MX9XHDL-HDBT (Cloud 9)
- 12V/3A Locking Power Supply
- 48V Power Supply for PoE
- 1 x IR Remote Control
- 1 x IR Extension Cable
- Rack Ears
- Terminal Connectors
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: AVPro Edge Cloud 9 High Definition Loop Mass Media Matrix
- Manufacturer: AVPro Edge
- Model: AC-MX9XHDL-HDBT
- SKU: AC-MX9XHDL-HDBT
- RM Product #: 61007