Allen & Heath MixWizard4 12:2 - Professional Mixing Console
Features
- 8 x Line Inputs with XLR/TRS Jacks
- Built-In FX with 20 Presets
- 6 x Aux Sends
- 16 x Direct Outputs
- 2 x Stereo Returns
Description
The MixWizard4 12:2 from Allen & Heath is a versatile, all-purpose professional mixing console with 100mm faders. The console features 8 mic/line inputs with inserts and direct outputs, six auxiliary outputs, two full channel dual stereo inputs, two stereo returns and two built-in FX engines with 20 presets.
Channels 1 through 8 feature mic/line inputs with balanced XLR and TRS jacks with 48V phantom power for plugging in microphones and instruments, each with a 4-band AEQ with sweepable mids. They each also feature a peak indicator, -20dB pad, six aux send knobs, pan knob, channel mute and a high-pass filter that attenuates frequencies below 80Hz by 12dB per octave. The mixer also includes two channels with dual stereo inputs that can be used separately, mixed together, or split and routed so that one feeds the other.
Channels 1 through 8 also feature inserts that can be used for inserting processing equipment into the signal chain such as compressors, outboard AEQ and delay units. Furthermore, they each have direct outputs that can be sent to a multi-track hardware recorder or computer audio interface for tracking live performances. The console's six aux sends use balanced TRS output jacks that can be used to feed stage monitors, outboard effects and other gear. In addition, the MixWizard4 12:2 is equipped with two stereo returns with TRS inputs that feature separate gain knobs. These allow for returns from outboard effects or input from external audio devices such as CD or MP3 players to be mixed to the stereo bus.
Key Features:
- 19" rack mountable
- 8 mic/line inputs with balanced XLR/TRS jack, insert and direct output
- 100mm faders
- Dedicated mono output fader - can be switched to provide an L+R mono feed for a centre or fill speaker, or sub bass feed
- 6 aux sends - 2x pre fade / 2x switched / 2x post fade
- L and R main outputs - XLR outputs with inserts
- 2 stereo returns
- Independent A-B output for feeding 2-track recorders, monitor wedges and more
- 4-band AEQ with 2 swept mids
- Twin FX engines with 20 FX presets
- Tri-colour, 12-segment bar graph metering
- +48V phantom power
- Footswitch connector (mutes/unmutes the ST1 FX Return)
- Signal and peak LEDs
- Lamp socket
Specifications
Maximum Output Level | XLR - +26 dBu into 600 ohms max load 1/4" jack - +21 dBu into 2k ohm max load |
Headroom | Channels +21 dB Mix +23 dB |
Metering | 3-colour LED, quasi peak response: Sensitivity - 0VU = +4 dBu at XLR output Master metres - 12-segment -30 to +16 dB Channel metres - 2-segment -12, +16 dB (5 dB before clip) |
Frequency Response | 10 Hz to 30 kHz (+/-0.5 dB) |
THD + N | Channel to mix out < 0.004% (at +10 dBu 1 kHz) |
Crosstalk | Fader shutoff > 90 dB (at 1 kHz) Mute shutoff > 90 dB (at 1 kHz) Inter channel > 90 dB (at 1 kHz) |
Noise | Mic EIN, -127 dB, (rms 22 Hz to 22 kHz) Residual output noise, < -95 dBu (-99 dB S/N), (rms 22 Hz to 22 kHz) LR unity fader mix noise, < -83 dBu (-87 dB S/N), (rms 22 Hz to 22 kHz) |
High-Pass Filter | 12 dB/octave below 80 Hz, (channel) |
Equalisation | AEQ: HF shelving, +/-15 dB, 12 kHz HM peak/dip, +/-15 dB, 500 Hz to 15 kHz, Q = 1.8 LM peak/dip, +/-15 dB, 35 Hz to 1kHz, Q = 1.8 LF shelving, +/-15 dB, 80 Hz Stereo AEQ HF Shelving ±15 dB, 12 kHz HM Peak/dip ±15 dB, 2.5 kHz, Q=1.8 LM Peak/dip ±15 dB, 250 Hz, Q=1.8 LF Shelving, ±15 dB, 80 Hz |
Power Supply | 100 - 240 V, 50/60 Hz auto sensing, IEC input Power consumption 45 W max Mains fuse T630 mA L 20 mm |
Connections | Mono channel: XLR balanced pin 2 hot, -60 to +10 dBu, sensitivity TRS balanced tip hot, -40 to +10 dBu, sensitivity Pad out (MIC), 2 kΩ Pad in (MIC or LINE), >10 kΩ, -20 dB Max input level, +30 dBu XLR phantom power, +48 V, on/off Stereo channel: ST1, 3 TRS unbalanced >10 kΩ, -16 to +20 dBu ST2, 4 TRS balanced >10 kΩ, -16 to +20 dBu Stereo returns: |
Dimensions | 20 x 20.9 x 7.7" (507 x 530 x 194 mm), (free standing) 19 x 4.8 x 17.5" (483 x 122 x 444 mm), (rack mounted, 10U, underside connectors) 19 x 7.6 x 19.6" (483 x 193 x 497 mm), (rack mounted, 11.2U, rear connectors) |
Weight | 24 lb (11 kg) |
In The Box
- Allen & Heath MixWizard4 12:2 - Professional Mixing Console
- Power Cord
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Allen & Heath MixWizard4 12:2 - Professional Mixing Console
- Manufacturer: Allen & Heath
- Model: WZ4122
- SKU: WZ4122
- RM Product #: 83017
- Warranty: 1 year manufacturer warranty on all Allen & Heath products apart from dLive models which have a 3 year manufacturer warranty