Atlona AT-HDVS-TX VGA/Audio + Two HDMI to HDBaseT Extender Switcher with Display

Description

The AT-HDVS-TX VGA/Audio plus Two HDMI to HDBaseT Extender Switcher with Display Control from Atlona allows you to transmit HDMI and VGA signals over HDBaseT with resolutions up to 1080p and 1920 x 1200. It features two HDMI inputs and one VGA input with analogue audio. A single HDBaseT output lets you send one of the input signals to any Atlona HDBaseT receiver or display with an HDBaseT input at distances up to 230'. The transmitter can be powered using a separately available power supply, or from compatible receivers using power of category cable. It can also supply power to receivers over category cable when connected to the power supply.

When used with the optional AT-HDVS-RX Receiver, you gain RS-232 display control and input selection of any of the three input sources. It can also de-embed the two channels of balanced audio on output to send to an amplifier. The transmitter is firmware-upgradeable via a USB port and includes a pair of mount ears for attaching underneath a table, desk, or stand. A captive screw connector for the power input is also included, allowing you to cut the cable to a desired length, reducing cable clutter.

*Note: A 5V hot plug event is used to trigger input selection on optional receiver. If a 5V signal is not detected, the source will not change.

Note: It is possible that some displays may have issues with VGA sources that don't have the same timings as HDMI sources used with the same displays.*

Features

• Two HDMI inputs
• VGA input with 3.5mm analogue audio
• Embeds analogue audio with VGA onto HDBaseT output
• Auto-switching for easy input management
• Extends resolutions of 1080p and 1920 x 1200 up to 230' over Cat6a/7 cable
• Supports RS-232 display control and input selection from optional AT-HDVS-RX Receiver
• Can be powered via separately available power supply or compatible receivers over catX cable
• Cable provides power over catX cable to receiver when connected to a power supply
• Firmware upgrade via USB for easy field service
• Includes mounting ears for attaching underneath a table, desk, or stand

Specifications