Audio-Technica Consumer VM530EN/H Headshell and Cartridge Combo Kit with VM530EN and AT-HS10BK
Features
- Includes VM530EN Cartridge
- Includes AT-HS10BK Headshell
- VM Dual Magnet for Matched Left & Right
- Increased Channel Separation
- Frequency Response: 20 Hz to 25 kHz
Description
The VM530EN/H Headshell and Cartridge Combo Kit from Audio-Technica includes the VM530EN elliptical nude dual moving magnet cartridge pre-mounted on the AT-HS10BK universal 1/2"-mount headshell. The VM530EN features dual magnets that are positioned to match left and right channels in the stereo record groove and improve channel separation, as well as extending the frequency response. Additionally, the cartridge employs an elliptical nude stylus that reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus.
The lightweight AT-HS10BK is a universal 1/2"-mount headshell designed for 4-pin turntable cartridges. The die-cast aluminium body is designed to minimise vibration and provides a finger-lift at the front position to enable precise placement of the stylus onto the record. The gold-plated lead wires offer lossless signal transmission. The headshell ships with mounting hardware.
Key Features:
- VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus.
- Aluminium cantilever.
- Paratoroidal coils improve generating efficiency.
- Centre shield plate between the left and right channels reduces crosstalk.
- Durable low-resonance polymer cartridge housing.
- Universal 1/2"-mount headshell for 4-pin turntable cartridges.
Specifications
Frequency Response | 20 Hz to 25 kHz |
Channel Separation | 27 dB (1 kHz) |
Tracking Force | Vertical Tracking Force: 1.8 - 2.2 g (2.0 g standard) |
Stylus | Stylus Construction: Nude round shank Stylus Shape: 0.3 x 0.7 mm elliptical Replacement Stylus: VMN30EN |
Recommended Load Impedance | 47 kOhms |
Output | 4.5 mV (at 1 kHz, 5 cm/sec) |
Channel Balance | 1.5 dB (1 kHz) |
Stylus Cantilever | Aluminium pipe |
Mount | 0.5" / 12.7 mm |
Coil | Coil Impedance: 2700 Ohms Coil Inductance: 460 mH (1 kHz) |
DC Resistance | 800 Ohms |
Load Capacitance | 100 to 200 pF |
Static Compliance | 35 x 10-6 cm/dyne |
Dynamic Compliance | 8 x 10-6 cm/dyne (100 Hz) |
Vertical Tracking Angle | 23° |
Dimensions (L x W x D) | Cartridge: 0.7 x 0.7 x 1.1" / 17.3 x 17.0 x 28.2 mm Cartridge and Headshell: 0.8 x 0.8 x 2.4" / 21.3 x 21.0 x 60.4 mm |
Weight | Cartridge: 0.2 oz / 6.4 g Cartridge and Headshell: 0.6 oz / 16.8 g |
In The Box
- Audio-Technica Consumer VM530EN/H Headshell and Cartridge Combo Kit with VM530EN and AT-HS10BK
- Installation Screws
- Washers
- Hexagon Nuts
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Audio-Technica Consumer VM530EN/H Headshell and Cartridge Combo Kit with VM530EN and AT-HS10BK
- Manufacturer: Audio Technica
- Model: VM530EN-H
- SKU: VM530EN-H
- RM Product #: 64822
- Warranty: 1 year manufacturer warranty on all Audio Technica products. 5 year limited warranty on all Audio Technica Wired Microphones.