Avalon Design V5 Pure Class A Microphone Preamplifier (Black) has been discontinued, here are some related products you might like:
Avalon Design V5 Pure Class A Microphone Preamplifier (Black)
Features
- Discrete, Pure Class A, High-Voltage Amp
- Microphone Dual Impedance Selector
- 10,000,000 Ohm DI-In for "Zero-Loading"
- Passive TONE BANK for Unique Shaping
- High Performance RE-AMP Transformer
Description
The Avalon V5 Pure Class A Microphone Preamplifier (Black) is an ultra-high performance preamplifier, instrument DI, and all input RE-AMP.
Each element of the Avalon V5 is specifically catered to the source. It has separate XLR mic, XLR line, TRS line, and 1/4" Hi-Z inputs for optimal impedance loading. The switchable input pad features variable attenuation, depending on the input that is being used.
Rather than providing just the bare minimum of a low cut filter, Avalon has included a selectable TONE BANK of 10 input-AEQ curves. Additionally, to combat high-frequency noise from instrument pickups, a separate high cut filter of -3dB at 3.7kHz can be engaged.
The versatility continues all the way to the output section, featuring balanced XLR and TRS outputs and RE-AMP/thru outputs. To take it one step further, Avalon has included a 1/4" headphone jack... allowing you to record and perfect DI guitar or bass tracks silently, and RE-AMP them later, concentrating only on your tone.
The Avalon V5 starts as a boutique microphone preamplifier, but that's really just the beginning of what it can do. It has the versatility and feature set to serve as single channel analogue front-end for any audio source.
Features
Versatility and connectivity
Dedicated inputs and outputs for any kind of analogue source material. A polarity switch is also included.
Source-specific features
The Avalon V5's operation modifies slightly to optimally handle each type of input.
10-setting TONE BANK
Choose from 10 different input-AEQ curves to keep the signal you need and eliminate what you don't.
RE-AMP capability
RE-AMPing has quickly become a standard practice in electric guitar and bass recording. V5 is one of the few high-end audio preamplifiers to offer it onboard.
Specifications
Input | |
Inputs | XLR balanced mic input x1 XLR balanced line input x1 TRS 1/4" balanced line input x1 1/4" unbalanced instrument input x1 |
Input Impedance | Mic: 6,600 ohms or 1,800 ohms, switchable Line: 9,000 ohms Hi-Z: 10,000,000 ohms |
Gain Range | Gain switched in 2 dB steps, +/-0.2 dB Mic Hi-Z: +20 to +60 dB Mic Low-Z: +26dB to +66 dB Line: -2 to +38 dB Instrument: +2 to +42 dB |
Input Pad Switch | Mic: -15 dB Line: -13 dB Instrument: -10 dB |
Phantom Power | +48V regulated, 10 mA |
Output | |
Outputs | XLR balanced output x1 TRS 1/4" balanced output x1 Buffered Instrument 1/4" THRU output x1 Unbalanced 1/4" RE-AMP output x1 |
Output Impedance | 600 ohms |
Maximum Output Level | Line: +30 dBu RE-AMP: +12dBu |
Polarity | Switchable reverse, all outputs in relay |
Performance | |
VU Metre | Professional, wide range -30 dB to +18 dB |
LED Indicator | LED peak capture: blue 0 dB red +20 dB |
Frequency Response | 2 to 20,000 Hz, +/-0.5 dB |
High Cut Filter | -3 dB @ 3.7 kHz, minimum phase design |
Noise | 22 - 22,000 Hz, unweighted: -98 dBu typical, minimum gain (-128 dB EIN) |
THD | 0.05% at +10 dBu 0.5% at +30 dBu |
General | |
Headphone Output | 1/4" TRS headphone output x1 0.5 W, 600 ohm load |
Lift | Earth lift switch isolates chassis ground from audio signal ground |
AC Power | Internal toroidal AC supply 115 - 230V |
Fuse | Selectable, 50/60Hz, 0.5A, 35w max |
Dimensions (W x H x D) | 8.5 x 3.5 x 12" (21.59 x 8.89 x 30.48 cm) |
Weight | 10 lbs (4.5 kg) |
In The Box
- Avalon Design VT-737SP - Channel Strip
- AC Power Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Avalon Design V5 Pure Class A Microphone Preamplifier (Black)
- Manufacturer: Avalon Design
- Model: V5
- SKU: V5-B
- RM Product #: 87801