Behringer 962 Sequential Switch CV Multiplexer Module for Eurorack

Description

The Behringer 962 Sequential Switch CV Multiplexer Module for Eurorack is a Eurorack-compatible CV multiplexer module based on the authentic circuit designs from the Moog Modular System 55. The discrete circuitry of the Moog Modular System has a very distinctive sound and was used by artists like Keith Emerson, Stevie Wonder, Tangerine Dream, and many other pop, rock, and jazz musicians.

Used as a latch, shifter, and signal selector, the 962 Sequential Switch can alternate between two or three signal inputs, depending on the number of input jacks plugged into the module. It can also be used to expand the 960 Sequential Controller from an 8-step sequencer up to a 24-step sequencer.

The 962 features 3 channel V-trig inputs for selecting CV input channels and separate V-trig outputs per channel. Triggers from other modules can be connected via 3.5mm cables and can be manually selected with the Trigger buttons. By connecting triggers in the Shift jack to activate the next stage in your sequence, you can create a 16- or 24-step sequence. Connect the 962 to the first stage output on a 960 Sequential Controller to expand its functionality, and create more complex and interesting sequences.

The Signal-In jacks allow the 962 to alternate between inputs. Connect an input signal to input 1 or 2 and the module will alternate between these two inputs. If all three inputs are used, then the 962 will automatically alternate between the three stages. A power ribbon cable and mounting screws are included.

Features

• Authentic reproduction of the circuitry from the Modular 55 Series
• 2/3 CV signal in to 1-1 out, expands the 960 module into a 24-step sequencer
• 3 channel V-trig in for selecting CV input channel
• 3 separate buttons for manual channel selection
• Separate V-trig outputs per channel
• 3rd input channel enabled, if Sig In 3 is used
• 8 HP
• Power: 25 mA +12 V, 20 mA -12 V
• Includes power ribbon cable and mounting screws