Behringer NX1000D Ultra-Lightweight Class-D Power Amplifier with DSP (160W/Channel at 8 Ohms)
Features
- 2 x 160W at 8 Ohms (Peak)
- DSP with 24-Bit/96 kHz Convertors
- High-Density Class-D Technology
- Lightweight at 7.5 lb
- SmartSense Impedance Compensation
Description
Lightweight (at 7.5 lb) and compact, the rackmountable Behringer NX1000D is a stereo power amplifier with high-performance DSP capable of delivering 160W of peak power per channel into a pair of 8-Ohm speakers, and in bridge mode, up to 620W of peak power into an 8-Ohm speaker. It employs SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply and zero-attack limiters to provide a 20 Hz to 20 kHz, linear frequency response with noise-free audio and fast transient response, at maximum output power, into any speaker load impedance.
The NX1000D features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A continuously variable speed fan and ventilation openings with back-to-front air flow further prevent overheating.
The amplifier offers built-in DSP with 24-bit/96 kHz convertors, which ensure signal integrity with a broad dynamic range. The DSP section features delay, crossover, AEQ, and dynamics processing. The security settings are lockable to prevent unwanted changes. The unit has a rear-panel USB port that allows setup, control, and monitoring from a computer with Behringer's free remote software (available separately). The amplifier's LCD display offers a convenient way to perform setup and adjustment tasks without a computer.
Simple to operate, the NX1000D's front panel is equipped with two detented and illuminated gain control knobs for precise level setting. The back panel houses two XLR-1/4" combination input connectors compatible with any line-level, balanced and unbalanced sources. Twist-lock speaker connectors provide reliable connections to your speaker cables.
Key Features:
- Delivers a maximum of 2 x 500W at 2 Ohms, 2 x 300W at 4 Ohms, 2 x 160W at 8 Ohms (stereo mode), and 620W at 8 Ohms (bridge mode)
- Weighs less than 7.5 lb
- Cool-running, high-density Class-D technology with near-zero thermal buildup
- Efficient switch-mode power supply for noise-free audio, fast transient response, and low power consumption
- SmartSense loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
- High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
- DSP section features delay, crossover (3 filter types, up to 48 dB/octave), AEQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings
- Zero-attack limiters offer maximum output level with reliable overload protection
- Front-panel LCD display enables setup and adjustment without a computer
- Can be set up, controlled, and monitored via rear-panel USB connector using free remote software (available separately)
- Built-in subwoofer/satellite crossover for subwoofer operation
- Detented and illuminated gain controls for precise level setting
- Precise 4-segment Signal and Limit LEDs to monitor performance
- XLR and 1/4" TRS combination input connectors for compatibility with balanced and unbalanced audio sources
- Twist-lock speaker connectors for reliable connection
- Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without interruption
- Back-to-front ventilation system prevents thermal buildup for reliable operation
- Designed and engineered in Germany
Specifications
Power Amplifier | |
Number of Channels | 2 |
Power Rating | 2 Ohms: 500 W per Channel 4 Ohms: 300 W per Channel 1000 W Bridged 8 Ohms: 160 W per Channel 620 W Bridged |
Amplifier Class | Class-D |
Performance | |
Protections | DC Fault, On/Off Muting, Reactive/Mismatched Load, Thermal |
Frequency Response | 20 Hz to 20 kHz +0/-1 dB |
Damping Factor | >155 at 8 Ohms |
Input Sensitivity | 0.78 V / 0 dBu |
Input Impedance | 10 Kilohms (Unbalanced) 20 Kilohms (Balanced) |
SNR | >100 dB |
Distortion | <0.1% |
Signal Processing | |
Audio Delay | Adjustable Up to 300 ms per Channel |
Crossover | Yes |
AEQ | 8-Band Parametric AEQ 2-Band AEQ per Channel |
Limiting | Peak, Zero-Attack (per Channel) |
Connectivity | |
I/O | 2 x Combo XLR-1/4" Input 2 x speakON Output |
USB | 1 x USB Type-B (Control) |
Power | |
AC Input Power | 100 to 120 VAC, 50 / 60 Hz (T 6.3 A H 250 V) |
AC Power Connector | IEC |
Power Consumption | 2 Ohms: 150 W (1/8 Power) |
Physical | |
Display & Indicators | 1 x Amber LCD (Backlit) 1 x LED (Limit, per Channel) 1 x Multi-Segment LED Metre (per Channel) 1 x Red LED (Protect, per Channel) |
Cooling | Fan (Variable Speed) |
Dimensions | 3.7 x 19.0 x 9.1" / 94.0 x 483.0 x 231.0 mm |
Weight | 7.5 lb / 3.4 kg |
In The Box
- Behringer NX1000D Ultra-Lightweight Class-D Power Amplifier with DSP (160W/Channel at 8 Ohms)
- Power Cord
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Behringer NX1000D Ultra-Lightweight Class-D Power Amplifier with DSP (160W/Channel at 8 Ohms)
- Manufacturer: Behringer
- Model: NX1000D
- SKU: NX1000D
- RM Product #: 65089
- Warranty: 3 year manufacturer warranty