Behringer XENYX 1202 12-Channel Audio Mixer has been discontinued, here are some related products you might like:
Behringer XENYX 1202 12-Channel Audio Mixer
Features
- 4 x XENYX Mic Preamps, 48 V Phantom
- 4 x Stereo Line Inputs
- 130 dB of Dynamic Range
- Warm, British-Style 3-Band EQs
- FX Send for Each Channel
Description
The Behringer XENYX 1202 is a mixer that offers clear and natural sound in a small and portable format. With twelve inputs, four high-quality XENYX mic preamps, and a 60mm logarithmic-taper master fader, this versatile mixer is ideal for a wide variety of mixing and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.
The XENYX 1202 is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first four input channels feature XENYX mic preamps on four XLR connectors, as well as four 1/4" inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.
The four sets of stereo inputs each feature +4/-10 switches used to match the mixer's input sensitivity with the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels. Each channel is equipped with a post-fader FX send, which you can use to send signal to an external processor of your choice.
The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phones outputs. The main mix fader controls the signal at both the main outs and 2-Track outputs, while a dedicated knob adjusts the volume for the phone/control room outputs.
Key Features:
- Compact and versatile 12-channel analogue mixer for small-stage gigs or mid-size corporate events.
- Four quality XENYX microphone preamps with 130 dB of dynamic range.
- Switchable 48V phantom power.
- Four balanced mono line inputs.
- Four balanced stereo pairs of line inputs.
- Neo-classic, British-style 3-band EQs for warm and musical sound.
- One mono post-fader FX-send knob per channel for sending to an external processor.
- Main mix outputs and separate control room, phones, and stereo 2-Track outputs.
- 2-Track inputs assignable to main mix or control room/phones outputs.
- Mic channels with low-noise and distortion-free circuitry for natural sound reproduction.
- Long-wearing 60mm logarithmic-taper master fader and sealed rotary controls.
- Designed and engineered in Germany.
Specifications
| Microphone Inputs | 4 x XLR, electronically balanced, discrete input circuit XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN | (EIN 20 Hz to 20 kHz) At 0 Ohm Source Resistance: -134 dB / 135.7 dB A-weighted At 50 Ohms Source Resistance: -131 dB / 133.3 dB A-weighted At 150 Ohms Source Resistance: -129 dB / 130.5 dB A-weighted Frequency Response: <10 Hz to 150 kHz (-1 dB) Frequency Response: <10 Hz to 200 kHz (-3 dB) Gain Range: +10 to +60 dB Maximum Input Level: +12 dBu at +10 dB gain Impedance: 2.6 kOhms, balanced (approximately) Signal-to-Noise Ratio: 110 dB / 112 dB A-weighted (0 dBu In at +22 dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted |
| Line Inputs | 4 x 1/4" / 6.3 mm TRS, electronically balanced Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately) Gain Range: -10 to +40 dB Maximum Input Level: +22 dBu at 0 dB gain |
| Stereo Line Inputs | 4 x pairs of 1/4" / 6.3 mm TRS, electronically balanced Impedance: 20 kOhms (approximately) Maximum Input Level: +22 dBu |
| Fade-Out/Crosstalk Attenuation | Main Fader Closed: 90 dB Channel Muted: 89.5 dB Channel Fader Muted: 89 dB |
| Frequency Response | Microphone Input to Main Out: <10 Hz to 90 kHz (+0 db/-1 dB) <10 Hz to 160 kHz (+0 db/-3 dB) |
| Equalisation | (AEQ mono channels) Low: 80 Hz (±15 dB) Mid: 2.5 kHz (±15 dB) High: 12 kHz (±15 dB) |
| FX Send | 1 x 1/4" / 6.3 mm TS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Main Outputs | 2 x 1/4" / 6.3 mm TRS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Control Room Outputs | 2 x 1/4" / 6.3 mm TS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Headphone Output | 1 x 1/4" / 6.3 mm TRS, stereo, unbalanced Maximum Output Level: +19 dBu / 150 Ohms (+25 dB) |
| 2-Track I/O | 1 x pair RCA, stereo, unbalanced CD/tape inputs 1 x pair RCA, stereo, unbalanced tape outputs |
| Noise | Main Mix at -∞, Channel Fader at -∞: -106 dB / -109 dB A-weighted Main Mix at 0 dB, Channel Fader at -∞: -95 dB / -98 dB A-weighted Main Mix at 0 dB, Channel Fader at 0 dB: -84 dB / -87 dB A-weighted |
| AC Adapter | Input: 120 V, 60 Hz Power Consumption: 13 W |
| Dimensions (H x W x D) | 1.9 x 9.5 x 8.7" / 47 x 242 x 220 mm |
| Weight | 4.8 lb / 2.2 kg |
In The Box
- Behringer XENYX 1202 12-Channel Audio Mixer
- PSU5-UL Power Supply
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Behringer XENYX 1202 12-Channel Audio Mixer
- Manufacturer: Behringer
- Model: 1202
- SKU: 1202
- RM Product #: 630
- Warranty: 3 year manufacturer warranty
Recently Viewed
View AllBehringer XENYX 1202 12-Channel Audio Mixer
