Behringer Xenyx Control2USB Control & Communication Center
Features
- VCA Control and USB Audio Interface.
- Large Control Knob Sets Levels Faster.
- High-End VCA Technology.
- Controls 3 Pairs of Studio Monitors.
- 2 x Powerful Headphone Amplifiers.
Description
The Behringer Xenyx Control2USB Control & Communication Center is a high-end studio control and communication centre with VCA control and a USB audio interface. It can be used to put master volume, talkback, source selection, and monitor control right at your fingertips when recording or mixing in a studio environment.
It features a large control knob, allowing you to make minute adjustments to volume. The Control2USB lets you set levels fast and accurately, which can be critical to the final sound when it comes to mastering an important project. It also utilises a high-end Voltage Controlled Amplifier (VCA) to provide even more precise level adjustments.
Furthermore, the built-in USB audio interface lets you connect directly to your computer and its digital library, with no additional hardware or drivers required. In addition, the Control2USB lets you switch between 3 pairs of studio monitors. You can add or remove a subwoofer and listen through small monitors or any other combination at the press of a button.
Features
- Premium, ultra-low noise and high headroom studio control and communication centre.
- All-in-one master volume controller, source selector, monitor switcher, and talkback box.
- 4 stereo inputs with independent level control plus an additional monitor mix input for your DAW.
- 3 independent and adjustable monitor outputs to connect up to 3 sets of studio monitors.
- Built-in talkback microphone with level control for direct communication with musicians.
- Large volume knob with true VCA control for extremely precise level adjustments.
- Built-in stereo USB audio interface, perfect for computer-based studios.
- Premium-quality phono preamp for direct turntable connection.
- 2 powerful headphones amplifiers with separate volume control.
- Convenient mono, mute, and dim functions right at your fingertips.
- High-precision dual 12-segment LED metres with input/output source switch.
- "Planet Earth" switching power supply for maximum flexibility (100-240V)
Specifications
Line Level | 1/4" (6.3 mm) balanced or unbalanced: 10 Hz to 40 kHz (+0 dB/-1 dB) Phono Input: 20 Hz to 20 kHz (±1 dB) |
Distortion (THD) | Line-level inputs to line level outputs (unity gain): <0.02 %, 20 Hz to 20 kHz @ +4 dBu Phono Input: <0.10 %, 20 Hz to 20 kHz @ +4 dBu |
Noise Floor | Unity gain with input 1, 2, and 3 assigned: -86 dBu, 20 Hz to 20 kHz Monitor A, B, and C outputs, studio output, DAW, 2-track A & B outputs: -90 dBu, 20 Hz to 20 kHz Phono input: -75 dBu, 20 Hz to 20 kHz Equivalent input noise (E.I.N.): -119 dBu, 20 Hz to 20 kHz |
Dynamic Range | Line inputs: 107 dB Phone input: 88 dB |
Crosstalk | Adjacent inputs: 95 dB @ 1 kHz Left to right/right to left: 85 dB @ 1 kHz Muted/level off: 95 dB @ 1 kHz |
Control Range | Input level: ±10 dB Output level: -12 dB to 0 dB Dim switch: 0 dB/-20 dB |
Input Voltage | Line inputs (+4 dB level setting): +4 dBu/+30 dBu (nominal/maximum) Line inputs (-10 dB level setting): -10 dBu/+15 dBu (nominal / maximum) Phono input @ 1 kHz, nominal gain: 5 mV/90 mV (nominal/maximum) |
Output Voltage | All line-level outputs (+4 dB level setting): +4 dBu/+21 dBu (nominal/maximum) All line-level outputs (-10 dB level setting): -10 dBu/+8 dBu (nominal/maximum) |
Maximum Voltage Gain | Input 1, 2, and 3 to: Monitor A, B, and C outputs: +32 dB DAW, 2-track A & B, and phones (rear) outputs: +22 dB Studio output: 32 dB Phones 1 & 2 outputs: 32 dB (output loaded @ 100 kOhms) Monitor mix input to: Phones (rear) outputs: 12 dB Studio output: 22 dB Phones 1 & 2 outputs: 22 dB (output loaded @ 100 kOhms) Phono input @ 1 kHz to: Monitor A, B, and C outputs: 65 dB DAW, 2-track A & B, and phones (rear) outputs: 55 dB Studio output: 66 dB Phones 1 & 2 outputs: 66 dB (output loaded @ 100 kOhms) |
Input Impedance | Line input: 20 kOhms balanced/14 kOhms unbalanced Phono input: 40 kOhms |
Output Impedance | Line output: 200 Ohms balanced/100 Ohms unbalanced Headphone output: 50 Ohms |
VU Metre | Input/Output: 12-segment LED: Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20, -30 dB |
Talkback | Automatic gain control (AGC): Yes Nominal output level: +4 dBu (+4 dB output level setting) Output level range: ∞ to 10 dB |
Power Supply | Mains voltage: 100-240 VAC, 50/60 Hz Fuse: T1AH 250 V Power consumption: 15 W Mains connection: Standard IEC receptacle |
USB | Audio: Stereo in/out Connector: Type B Sample rate: 44.1/48 kHz |
Dimensions (H x W x D) | 3.4 x 15.3 x 7.8" (87 x 389 x 198 mm) |
Weight | 5.3 lb (2.4 kg) |
In The Box
- Behringer Xenyx Control2USB Control & Communication Center.
- AC Power Cable.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Behringer Xenyx Control2USB Control & Communication Center
- Manufacturer: Behringer
- Model: CONTROL2USB
- SKU: CONTROL2USB
- RM Product #: 61444
- Warranty: 3 year manufacturer warranty