Benro C373F Series 3 Carbon Fibre Video Tripod with S8 Pro Video Head has been discontinued, here are some related products you might like:
Benro C373F Series 3 Carbon Fibre Video Tripod with S8 Pro Video Head
Features
- Lightweight System with 8 kg Payload
- Flat Base Head with 3/8"-16 Thread
- Carbon Fibre Tripod with 75mm Bowl
- Half Ball Adapter Included
- 31.5 cm Minimum Height, 163 cm Maximum Height
Description
The Benro C373F Series 3 CF Video Tripod & S8 Head is a lightweight tripod system featuring carbon fibre tripod legs and a flat base head supporting up to 8 kg. A half ball adapter is included for mounting the head on the tripod legs, but the adapter is removable so you can attach the head on sliders and other support gear via the 3/8"-16 thread on the bottom. The legs extend from 31.5 to 163 cm, and the entire system weighs only 4.5 kg. Opening fully to the minimum height conveniently allows for stable low-angle shooting.
Designed to give you more precise control, the head provides stepless, continuous adjustment of both pan and tilt drag. This allows you to dial in the amount of tension you feel most comfortable with for a given shot. You can pan a full 360° and tilt forward/backward 90/70°. The head also features a four-step adjustable counterbalance that helps compensate for different-sized cameras and adapts to payloads with varying centres of gravity.
The legs have a two-stage, three-section design with three discreet stops for locking at different degrees of spread, and multi-angle flip-lever leg locks which allow each leg to be positioned independently for quick setup and uneven terrain. The legs have rubber feet, but come with stainless-steel spiked feet that can be installed for use on soft surfaces.
Both the head and legs offer a bubble level. The head also provides two 3/8"-16 accessory mounting threads for directly attaching monitor arms and other gear. A pan bar is included, and an optional second one can be attached on the other side.
Features
- Flat base head with 3/8"-16 thread
- Half ball adapter included
- Carbon fibre two-stage, three-section tripod legs
- 8 kg payload
- 31.5 cm minimum height for low-angle shooting
- 163 cmmax height
- Stepless, continuous pan/tilt drag
- 360° panning
- 90/70° forward/backward tilting
- Four-step adjustable counterbalance
- Three-stop independent leg spread
- Independent flip-lever leg locks
- Rubber feet
- Stainless-steel spiked feet included
- Two 3/8"-16 threads on the head for mounting monitor arms and other accessories
Specifications
C373F Series 3 CF Video Tripod | |
Head Fitting | 75 mm bowl |
Material of Construction | Carbon fibre |
Maximum Height | 163 cm |
Minimum Height | 31.5 cm |
Folded Length | 80 cm |
Leg Sections | 3 |
Leg Lock Type | Flip-lock |
Independent Leg Spread | Yes, with 3 stops |
Feet | Rubber feet, stainless-steel spiked feet included |
Bubble Level | Yes |
Leg Diameter | Section 1: 3.2 cm Section 2: 2.9 cm Section 3: 2.5 cm |
S8 Pro Video Head | |
Mount Type | Flat base with 3/8"-16 thread Removable 75 mm half ball adapter included |
Load Capacity | 8 kg |
Counter Balance System | Stepped: 0 - 3 |
Quick Release/Wedge Plate | Benro QR6 slide-in video quick release plate |
Tilt Drag | Stepless |
Tilt Range | +90° to -70° |
Tilt Lock | Yes |
Pan Drag | Stepless |
Pan Range | 360° |
Pan Lock | Yes |
Bubble Level | Yes |
Temperature Range | -20 to 60°C |
Height | 15 cm |
Weight | 2.6 kg |
General | |
Weight | 4.5 kg |
In The Box
- Benro C373F Series 3 Carbon Fibre Video Tripod with S8 Pro Video Head
- QR6 Slide-In Video Quick Release Plate
- 75HB 75mm Half Ball Adapter
- Pan Bar
- Spiked Feet Set
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Benro C373F Series 3 Carbon Fibre Video Tripod with S8 Pro Video Head
- Manufacturer: Benro
- Model: C373FBS8
- SKU: C373FBS8
- RM Product #: 30433
- Closed Length: 80 cm
- Maximum Height: 163.0 cm
- Load Capacity: 8.0 kg
- Weight: 4.50 kg
- Material: Carbon Fibre
- Minimum Height: 31.5 cm
- Head Type: Half Ball
- Warranty: 2 Year manufacturer warranty