Product Features
  • For Connecting DMX Lights and Effects
  • 22 AWG
  • Stranded Tinned Copper Conductors
  • PVC Jacket

Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
South Island

The 25' American DJ Accu-cable 3-pin DMX Cable is designed for connecting DMX controllers, DMX lights, and other 3-pin DMX512 devices into a stage lighting or effect system for live performance applications. The cables are constructed of 22 AWG stranded tinned copper conductors insulated by polyethylene within a PVC jacket.

ConstructionTinned copper conductors
Polyethylene twisted pair insulation
Polyethylene inner jacket, Duofoil® (100% coverage) and cotton plus a tinned copper braid shield (85% coverage)
PVC jacket
Stranding0.15 x 19
DiameterConductor: 0.0354" (0.0899 cm)
Inner jacket: 0.055" (
Overall: 0.229" (
ConductorTC-tinned copper
InsulationPOE polyethylene
Lay Length2.5" (6.4 cm) left hand lay with 4.8 twists per foot
Jacket MaterialInner: POE-polyethylene
Outer: PVC-polyvinyl chloride
Outer ShieldTrade name: Duofoil
Type: Tape/Braid
Outer Shield MaterialLayer Number:1, Material Trade Name: Dufoil®, Type: Tape, Material: Aluminium Foil-Polyester, Coverage %: 100
Layer Number: 2, Material Trade Name: Dufoil®, Type: Braid, Material: TC-Tinned Copper, Coverage %: 85
Operating Temperature Range-22 to 167°F (-30 to 75° C)
Minimum Bend Radius3.2" (8.1 cm)
Pulling TensionMaximum 72 lb (33 kg)
Length25' (7.6 m)
Impedance110 O
CapacitanceConductor to conductor at 1 kHz: 12.8 pF/ft
Conductor to conductor and shield: 23 pF/ft
Velocity of Propagation66%
Delay1.6 Nanoseconds per foot
DC ResistanceConductor at 20°C: 24 O/1000 ft
Outer shield at 20°C: 3.4 O/1000 ft
AttenuationAt 1 MHz: 0.6 dB/100 ft
Current2.1 A mps per conductor at 25°C
Length25' (7.6 m)
WeightBulk wire: 0.775 lb (0.352 kg)
American DJ Accu-cable 3-pin DMX Cable (25')
American DJ
RM Product #:
Cable Connector:
XLR (3-Pin) Female
Cable Connector:
XLR (3-Pin) Male