Racks & Road Cases
SKB Injection-Molded 2 RU Studio Flyer Rack Case
- Compact Carry-On Size
- Waterproof and Impact-Resistant
- Moulded-In, Front and Rear Rack Rails
- 2 RU Studio Rack and Laptop Combo Case
- Cord Pockets
In stock
Ships today
You Pay:
$769.00
SKB 10U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships today
You Pay:
$769.00
SKB 1SKB-R6UW Roto Rolling Rack Case (6 RU)
- 6 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships today
You Pay:
$859.00
SKB 8U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships direct today
You Pay:
$669.00
SKB Injection Molded 4U Studio Flyer Rack Case
- 4U Rack and Laptop Combo Case
- Stacks on Standard Roto Racks
- Quiet-Glide Wheels & Pull Handle
- Laptop Work Surface
- Made in the USA
In stock
Ships direct today
You Pay:
$969.00
SKB 1SKB-D1822 Bass Drum Case 18 x 22"
- Holds One 45.7 x 55.9 cm Bass Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
In stock
Ships direct today
You Pay:
$819.00
SKB Roto Molded 10U Top Mixer Rack
- 10U Slanted Rackmount, Stackable
- Roto Molded Linear Medium Density Polyethylene
- Steel Threaded Rails
- Hard Lid & Removable Back Door
- Side Access Ports for Cables
- Carry Handles & TSA Locking Trigger Latches
In stock
Ships direct today
You Pay:
$679.00
SKB Trap ATA Stand Case with Wheels - holds Audio and Lighting Stands up to 36 1/2 x 11 7/8 x 8 1/4"
- For Lighting, Audio, & Sports Equipment
- Fits Mic Stands and Drum Hardware
- ATA Certified
- Polyethylene Hard-Shell Construction
- Inline Skate Wheels
In stock
Ships direct today
You Pay:
$669.00
SKB iSeries RODECaster Pro II Hard-Shell Case
- Form-Cut Foam for RODECaster Pro II
- Main Pocket Holds up to Two PodMics
- 2 x Accessory Pockets
- MIL-STD 810G Waterproof Case
- Moulded Polypropylene Copolymer Resin
- Gasket-Sealed Design
In stock
Ships direct today
You Pay:
$689.00
SKB 3i-1717-16LT iSeries Dual Snare Waterproof Utility Case
- Think Tank-designed Nylex-wrapped fitted foam liner
- Reinforced locking loops for customer supplied locks
- Waterproof and dust tight design (MIL-STD 810G)
- Molded-in hinge for added protection
- Trigger release latch system
In stock
Ships direct today
You Pay:
$789.00
SKB 1SKB-R8UW Roto Rolling Rack Case (8 RU)
- 8 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships direct today
You Pay:
$959.00
SKB 1SKB-R4UW Roto Rolling Rack Case (4 RU)
- 4 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships direct today
You Pay:
$769.00
SKB 1SKB-R104W 10 x 4 Compact Rolling Rig
- Rotationally Molded LMDPE
- 10U, 7-Ddegree Angled Top Threaded Steel Rails
- Top & Doors are Injection Molded
- 4U Threaded Vertical Steel Rails on Front
- Two Removable Side Access Plugs
In stock
Ships direct today
You Pay:
$1,099.00
SKB 3I-4217-18T iSeries Waterproof Acoustic Guitar Case (tan)
- Gasketed, waterproof, submersible design
- Automatic ambient pressure equalisation
- Moulded-in hinge
- Reinforced locking loops
- Convenient quiet-glide wheels
In stock
Ships direct today
You Pay:
$959.00
SKB H4816W ATA Large Stand Case
- Meets ATA specifications
- Spring loaded reverse-cinch buckles
- Moulded-in bumpers
- Moulded in sure-grip handle
In stock
Ships direct today
You Pay:
$959.00
SKB 1SKB-D1820 18 x 20 Bass Drum Case
- Stackable
- Pedestal Feet
- Padded Interiors
- Heavy-Duty Web Strap
- Grip Handles with a 90° Stop
- Sturdy High Tension Slide Telease Buckle
In stock
Ships direct today
You Pay:
$779.00
SKB 3i-2015-10BC iSeries Injection Molded Mil-Standard Waterproof Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Built-in Roller Blade Wheels
- Cubed Foam Interior
In stock
Ships direct today
You Pay:
$869.00
SKB 1SKB-R102 10x2 Roto Rack Case
- Slanted 10U Top and Standard 2U Front
- Roto-Moulded One-Piece Base
- Side Access Port for Cables
- Works with the SKB AV-8 Shelf
In stock
Ships direct today
You Pay:
$769.00
SKB 3i-2217M82U 2U iSeries Injection Moulded Fly Rack (13")
- 2U removable injection moulded shock rack cage
- 13 inch rack depth
- Interior foam protection
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case
In stock
Ships direct today
You Pay:
$759.00
SKB iSeries Injection Molded Mil-Standard Waterproof Case for Blackmagic Design ATEM TV Studio
- Fits Blackmagic Design ATEM Television Studio Pro HD or Pro 4K
- Watertight Gasket Seal
- Stainless Steel Moulded-in Hinges
- Over-Molded Cushion Grip Handle
- Padlock Loops
- UV, Solvents, Corrosion, Fungus & Impact Resistant
In stock
Ships direct today
You Pay:
$869.00
Allen & Heath SQ5 Case with Dogbox
- 9mm black fireproof plywood
- 4 latch, 6 handle
- Inner with 10 mm and 15mm shock proof EVA foam
- With 3.5inch wheels, dogbox included
- Flight case design with 2 parts
In stock
Ships today
You Pay:
$639.00
You Pay:
$839.00
SKB 3i-2213M124U iSeries Injection Molded Mil-Standard Waterproof Shallow Fly Rack (9")
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Trigger Release Latch System
- 9"/ 22.86 cm Rack Depth
In stock
Ships direct today
You Pay:
$1,059.00
SKB 3i-2011M72U iSeries Injection Molded Mil-Standard Waterproof Shallow Fly Rack (9")
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Trigger Release Latch System
- 9"/ 22.86 cm Rack Depth
In stock
Ships direct today
You Pay:
$869.00
SKB 3i-2011M103U iSeries Injection Molded Mil-Standard Waterproof Shallow Fly Rack (9")
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- 9"/ 22.86 cm Rack Depth
- Built-in Wheels & Pull Handle
In stock
Ships direct today
You Pay:
$869.00
SKB 3i-5014-TKBD iSeries Injection Molded Mil-Standard Waterproof Narrow 76-Note Keyboard Case
- Customised Interior by Think Tank
- Injection-Moulded Polypropylene Resin
- 16 x Foam Blocks for Secure Fit
- Waterproof, Submersible Design
- Resists UV, Solvents, Corrosion & Fungus
In stock
Ships direct today
You Pay:
$869.00
SKB 3i-4719-TKBD iSeries Injection Molded Mil-Standard Waterproof 61-Note Keyboard Case
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Ambient Pressure Equalization Valve
- Pull Handle & Wheels for Easy Towing
- Steel Reinforced Padlock Loop
- Repositionable Velex-Covered Foam Pads
In stock
Ships direct today
You Pay:
$1,099.00
SKB 3i-4217-TKBD iSeries Injection Molded Mil-Standard Waterproof 61-Note Keyboard Case
- Customised Interior by Think Tank
- Impact-Resistant Polypropylene Resin
- 16 x Foam Blocks for Secure Fit
- Waterproof, Submersible Design
- Resists UV, Solvents, Corrosion & Fungus
- Pull Handle & Wheels
In stock
Ships direct today
You Pay:
$995.00
SKB 3i-4214-TKBD iSeries Injection Molded Mil-Standard Waterproof Case Narrow 61-Note Keyboard Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Pull Handle & Wheels for Easy Towing
- Ambient Pressure Equalization Valve
In stock
Ships direct today
You Pay:
$779.00
SKB 3i-3614-TKBDi Series Injection Molded Mil-Standard Waterproof Case 49-Note Keyboard Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Pull Handle & Wheels for Easy Towing
- Ambient Pressure Equalization Valve
In stock
Ships direct today
You Pay:
$679.00
SKB Bass Drum Case 20 x 22" (Black)
- Holds One 20 x 22" Bass Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
In stock
Ships direct today
You Pay:
$859.00
SKB 1SKB-D1622 16 x 22" Bass Drum Case
- Sackable
- Pedestal Feet
- Padded Interiors
- High Tension Slide Release Buckle
- Heavy-Duty Web Strap
- Patented Roto-X Pattern
In stock
Ships direct today
You Pay:
$729.00
SKB 1SKB-D1620 16 x 20 Bass Drum Case
- Sackable
- Pedestal Feet
- Padded Interiors
- High Tension Slide Release Buckle
- Heavy-Duty Web Strap
- Patented Roto-X Pattern
In stock
Ships direct today
You Pay:
$679.00
SKB 1SKB19-R1400 Rotomolded Gig Safe
- 14U rack for Deeper Rackmount Mixers
- Installed XLR Cable Connectors Cover
- Accommodates AV-14 Retractable Shelf
- Attaches to SKB19-REX6 Expander Case
- Attaches to SKB-R3224 GigDolly
In stock
Ships direct today
You Pay:
$969.00
ORCA OR-330 Audio Mixer Bag
- Unique battery pocket with extra space
- Detachable front pocket for up to 6 wireless receivers
- 2 detachable external pouches and 3 internal rubber bands to hold wireless receivers
- 2 detachable carrying handles and padded shoulder strap
- 2 extra padded sponges to position wireless receivers inside the bag
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$799.00
SKB-H5020W ATA XL Stand Case
- Moulded-in bumpers
- Field replaceable components
- Sure-grip handle
- Roto-moulded indestructability
Usually ships in 8 - 12 weeks
You Pay:
$859.00
SKB 10x6 Roto Rack Console
- Slanted 10U Top and Standard 6U Front
- Roto-Moulded One Piece Base
- Works with the SKB AV-8 Shelf
- Flat hard top
- Durable steel threaded rails
Usually ships in 8 - 12 weeks
You Pay:
$959.00
K&M 42020-000-55 Rack Wagon
Combination Rack Solution, Caster Mobility, Tilt-Adjustable Rack Piece
Usually ships in 4 - 6 weeks
You Pay:
$1,089.00
SKB 1SKB-R1906 Roto Molded Rack Expansion Case with Wheels
- Nylon Web Cinch Straps
- TSA Glass Reinforced Nylon Trigger Latches
- Durable Dual Locking 5" Wheels
- Rack Units: 6
- Front & Rear Rails
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB 1SKB-R104 Audio and DJ Rack Case (Black)
- Two TSA Locking Patented Trigger Latches
- Stackable for Storage and Transport
- 10U Slanted Top Rackmount
- 4U Front Rackmount
- Hard Lid and Doors
Contact us for an ETA
Price On Request
Contact us for more information
SKB-R904U20 4U Shock Mount Rack
- Standard 19" rack
- Water resistant
- Elastomer shock absorbers
- Mount hardware in racks
Usually ships in 8 - 12 weeks
You Pay:
$1,049.00
SKB AUV-1 Amp Utility Vehicle Case
Designed to carry and hold all 2-12 style mid-size combo amps.
Usually ships in 8 - 12 weeks
You Pay:
$669.00
SKB 6U 20" Deep R-Series Shock Rack
- Rear Rails
- Shock Resistant
- Optional Caster Kit
- Roto Molded for Strength
- Adjustable Elastomer Shock Absorbers
- Molded-in Handles Provide Secure Grasping Points
Usually ships in 8 - 12 weeks
You Pay:
$1,159.00
SKB 3i-2217M103U 3U iSeries Injection Moulded Fly Rack (13")
- 3U Removable injection moulded shock rack cage
- 13 inch rack depth
- Interior foam protection
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
Usually ships in 8 - 12 weeks
You Pay:
$1,189.00
SKB 3i-1813-7WMC iSeries Injection Molded Mil-Standard Waterproof 8-Wireless Mic Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Trigger Release Latch System
- Ambient Pressure Equalization Valve
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB 1SKB-5820W ATA 88 Note Keyboard Case
- Meets ATA Cat 1 Specs as Airline Shipping Container
- Includes TSA Locking Latches
- Patented Corner Cleat Design
- Exterior Bumpers Protect Valance & Hardware
- Built-in Wheels
Usually ships in 8 - 12 weeks
You Pay:
$939.00
SKB 1SKB-455W Contoured Pro Baritone Sax Case with Wheels
- ABS Vacuum Formed Material
- Plush Lined EPS Interior
- In-Line Wheels for Easy Transport
- TSA Locks
- Molded-in Bumper Protection
- Accommodates Low Bb or Low A Baritone Saxophones
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB SKB iSeries Injection Molded Mil-Standard Waterproof Roland AX Edge Keytar Case
- Accommodates a Roland AX Edge Keytar and accessories
- Wheels and Pull Handle
- Accessory Compartment
- Waterproof & Dust Tight Design (MIL-C-4150J / IP67)
- Molded-in Hinge for AddedProtection
Usually ships in 8 - 12 weeks
You Pay:
$779.00
Winsted 88397 Rack Mount Keyboard Shelf (Black)
- Holds keyboards up to 16.5" (419 mm) wide.
- Platform provided for a mouse.
- The shelf pulls out 18" (457 mm).
Usually ships in 4 - 6 weeks
You Pay:
$679.00
SKB Trap X2 Drum Case (Black)
- Top Loading Case/Holds Six Cymbals,Snare
- Convenient, Removable Tray Storage
- Integrated Fold-Down Cymbal Vault
- Removable Lid / Carpeted Interior
- 4" Locking Wheels with Brakes
Special Order
Enquire for ETA
You Pay:
$819.00