Racks & Road Cases

• Dust cover for the RODECaster Pro II
• High-quality clear polycarbonate
• Protects from dust, dirt and spills

• Compact Carry-On Size
• Waterproof and Impact-Resistant
• Moulded-In, Front and Rear Rack Rails
• 2 RU Studio Rack and Laptop Combo Case
• Cord Pockets

• Fits Most SKB Rack Mount Cases
• HD Hook and Loop Fastener Surface
• Rackmount pull-out shelf
• Uses 2U of rack space

• Rotationally Moulded Polyethylene Plastic
• Front and Rear Steel Rack Rails
• Recessed Steel Twist Latches
• Front and Rear Gasket Covers
• Heavy-Duty Flush-Mount Handles

• 6 RU of Rack Space
• One-Touch Pull Handle
• Rolling Wheels on Back Lid
• Military-Grade Butterfly Latches
• Threaded Steel Rails

• Holds "Rack-able" Equipment
• Two Vertical Rack Units
• Multiple Applications
• Rail-To-Rail Depth of 27.2 cm
• Steel Front & Rear Threaded Rails

• Rotationally Moulded Polyethylene Plastic
• Front and Rear Steel Rack Rails
• Recessed Steel Twist Latches
• Front and Rear Gasket Covers
• Heavy-Duty Flush-Mount Handles

• Side Openings for XLR/TRS Cable Input
• Detachable, Water-Resistant Cover
• Adjustable Strap and Shoulder Pad
• Wireless Receiver Pouch
• Bottom Panel Access to Batteries

• Rotationally Moulded Polyethylene Plastic
• Front and Rear Steel Rack Rails
• Recessed Steel Twist Latches
• Front and Rear Gasket Covers
• Heavy-Duty Flush-Mount Handles

• Rotationally Moulded Polyethylene Plastic
• Front and Rear Steel Rack Rails
• Recessed Steel Twist Latches
• Front and Rear Gasket Covers
• Heavy-Duty Flush-Mount Handles

• 4U Rack and Laptop Combo Case
• Stacks on Standard Roto Racks
• Quiet-Glide Wheels & Pull Handle
• Laptop Work Surface
• Made in the USA

• Holds One 45.7 x 55.9 cm Bass Drum
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Holds "Rack-able" Equipment
• Six Vertical Rack Units
• Multiple Applications
• Rail-To-Rail Depth of 10.7"
• Steel Front & Rear Threaded Rails

• 10U Slanted Rackmount, Stackable
• Roto Molded Linear Medium Density Polyethylene
• Steel Threaded Rails
• Hard Lid & Removable Back Door
• Side Access Ports for Cables
• Carry Handles & TSA Locking Trigger Latches

• For Lighting, Audio, & Sports Equipment
• Fits Mic Stands and Drum Hardware
• ATA Certified
• Polyethylene Hard-Shell Construction
• Inline Skate Wheels

• Form-Cut Foam for RODECaster Pro II
• Main Pocket Holds up to Two PodMics
• 2 x Accessory Pockets
• MIL-STD 810G Waterproof Case
• Moulded Polypropylene Copolymer Resin
• Gasket-Sealed Design

• Think Tank-designed Nylex-wrapped fitted foam liner
• Reinforced locking loops for customer supplied locks
• Waterproof and dust tight design (MIL-STD 810G)
• Molded-in hinge for added protection
• Trigger release latch system

Constructed of FORCE Polyethylene Weather and Chemical Resistant Light and Durable Fits 19" Rack Mixers

• Professional 19" Metal Rack
• Black Colour
• 475mm Max Usable Depth

• 3U rSeries Rack
• Roto-Molded of Polyethylene (LLDPE)

• Holds One 16 x 16" Floor Tom
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Carrying Bag for L-8 L8 Mixer

• Holds up to Eight 24" Diameter Cymbals
• Carrying Handle & Pull Out Handle
• In-Line Skate Style Wheels
• Molded with SKB Roto "X" Pattern

• For Covering a Qu-24 Mixer
• Water-Repellent 113 g Polyester

• 8 RU of Rack Space
• One-Touch Pull Handle
• Rolling Wheels on Back Lid
• Military-Grade Butterfly Latches
• Threaded Steel Rails

• Rotationally Moulded Polyethylene Plastic
• Front and Rear Steel Rack Rails
• Recessed Steel Twist Latches
• Front and Rear Gasket Covers
• Heavy-Duty Flush-Mount Handles

• 4 RU of Rack Space
• One-Touch Pull Handle
• Rolling Wheels on Back Lid
• Military-Grade Butterfly Latches
• Threaded Steel Rails

• Holds Up To Eight 22" Diameter Cymbals
• Rotationally "X" Moulded Design
• Linear Low-Density Polyethylene
• Four Padded Dividers for Protection
• With Storage Pocket

• Fits Roto Rack & Shallow Series Cases
• 4" Locking Wheels
• Cinch Straps
• Side Handles

• Holds One 6.5 x 14" Snare Drum
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Protects MixPre-10T from Rain and Dust
• 1000-Denier Cordura Nylon Exterior
• Interior Foam Padding
• Clear Vinyl Cover
• Two Transmitter Pockets

• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Holds One 14 x 16" Floor Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• Rotationally Molded LMDPE
• 10U, 7-Ddegree Angled Top Threaded Steel Rails
• Top & Doors are Injection Molded
• 4U Threaded Vertical Steel Rails on Front
• Two Removable Side Access Plugs

• Gasketed, waterproof, submersible design
• Automatic ambient pressure equalisation
• Moulded-in hinge
• Reinforced locking loops
• Convenient quiet-glide wheels

• Holds One 12 x 14" Floor Tom
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Molded-in bumpers to add structural strength and protect valances
• Innovative bumper designs create stand-up stability
• Perfect fit valances with D-Ring for strap

• Holds One 25.4 x 30.5 cm Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• Meets ATA specifications
• Spring loaded reverse-cinch buckles
• Moulded-in bumpers
• Moulded in sure-grip handle

• Made from EVA (Ethylene-Vinyl Acetate)
• Semi-Hard Carrying Bag

• Stackable
• Pedestal Feet
• Padded Interiors
• Heavy-Duty Web Strap
• Grip Handles with a 90° Stop
• Sturdy High Tension Slide Telease Buckle

• Holds One 10 x 10" Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• For Covering a Qu-16 Mixer
• Water-Repellent 113 g Polyester

• 9mm Black Fireproof Plywood
• 8 Latches, 6 Handles
• Shockproof EVA Foam
• 3.5" Wheels, with Dogbox
• Flight Case Design with 2 Parts

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Built-in Roller Blade Wheels
• Cubed Foam Interior

• Slanted 10U Top and Standard 2U Front
• Roto-Moulded One-Piece Base
• Side Access Port for Cables
• Works with the SKB AV-8 Shelf

• 2U removable injection moulded shock rack cage
• 13 inch rack depth
• Interior foam protection
• Interior foam protection
• Ultra high-strength polypropylene copolymer resin case

• Fits Blackmagic Design ATEM Television Studio Pro HD or Pro 4K
• Watertight Gasket Seal
• Stainless Steel Moulded-in Hinges
• Over-Molded Cushion Grip Handle
• Padlock Loops
• UV, Solvents, Corrosion, Fungus & Impact Resistant

• Holds Seats, Pedals, Mounts
• Two Built-in Roller Blade Wheels
• Telescoping, Moulded Pull-out Handle
• Removable Lid
• Dual Nylon Web Cinch Closure
• Rated to Fit in Back Seat of Car

• 9mm black fireproof plywood
• 4 latch, 6 handle
• Inner with 10 mm and 15mm shock proof EVA foam
• With 3.5inch wheels, dogbox included
• Flight case design with 2 parts

• For Covering an SQ-7 Mixer
• Water-Repellent 4 oz Polyester

• Reinforced Locking Loops
• Waterproof & Dust Tight Design
• Molded-in Hinge for Added Protection
• Trigger Release Latch System
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Padded Interior

• 4U removable injection molded shock rack cage
• Under 62 linear inches (non-oversized luggage)
• Interior foam protection
• Ultra high-strength polypropylene copolymer resin case construction
• Resistant to UV, solvent, corrosion and fungus resistant

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Trigger Release Latch System
• 9"/ 22.86 cm Rack Depth

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Trigger Release Latch System
• 9"/ 22.86 cm Rack Depth

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• 9"/ 22.86 cm Rack Depth
• Built-in Wheels & Pull Handle

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Trigger Release Latch System
• Ambient Pressure Equalization Valve

• Customised Interior by Think Tank
• Injection-Moulded Polypropylene Resin
• 16 x Foam Blocks for Secure Fit
• Waterproof, Submersible Design
• Resists UV, Solvents, Corrosion & Fungus

• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Ambient Pressure Equalization Valve
• Pull Handle & Wheels for Easy Towing
• Steel Reinforced Padlock Loop
• Repositionable Velex-Covered Foam Pads

• Customised Interior by Think Tank
• Impact-Resistant Polypropylene Resin
• 16 x Foam Blocks for Secure Fit
• Waterproof, Submersible Design
• Resists UV, Solvents, Corrosion & Fungus

• Pull Handle & Wheels

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Pull Handle & Wheels for Easy Towing
• Ambient Pressure Equalization Valve

• For Covering a Qu-32 Mixer
• Water-Repellent 113 g Polyester

• Fits GLD-112 Digital Mixing Console
• Water repellent material
• Protects from dust, dirt, and moisture

• Fits GL2400-24 Analogue Mixing Consoles
• Protect from dust and dirt
• Nylon material

• Molded-In Hinge
• Gasket Seal
• Ultra High-Strength Polypropylene Copolymer Resin
• Snap-Down Rubber Over-Molded Cushion Grip Handle
• Pull Handle & Wheels for Easy Towing
• Ambient Pressure Equalization Valve

• Holds One 20 x 22" Bass Drum
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Sackable
• Pedestal Feet
• Padded Interiors
• High Tension Slide Release Buckle
• Heavy-Duty Web Strap
• Patented Roto-X Pattern

• Sackable
• Pedestal Feet
• Padded Interiors
• High Tension Slide Release Buckle
• Heavy-Duty Web Strap
• Patented Roto-X Pattern

• Sackable
• Pedestal Feet
• Padded Interiors
• High Tension Slide Release Buckle
• Heavy-Duty Web Strap
• Patented Roto-X Pattern

• Holds One 40.6 x 45.7 cm Floor Tom
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Holds up to Eight 22" Diameter Cymbals
• Carrying Handle & Pull Out Handle
• In-Line Skate Style Wheels
• Molded with SKB Roto "X" Pattern

• 14U rack for Deeper Rackmount Mixers
• Installed XLR Cable Connectors Cover
• Accommodates AV-14 Retractable Shelf
• Attaches to SKB19-REX6 Expander Case
• Attaches to SKB-R3224 GigDolly

• Custom Fit For StudioLive 16.4.2
• Fits StudioLive 16 Series III Mixer

• For Tascam DR-60D Digital Recorder
• Protection From Rain & Moisture
• Zippered Clear Panel to See Controls

• Watertight Gasket Seal
• Stainless Steel Moulded-in Hinges
• Over-Molded Cushion Grip Handle
• Padlock Loops
• UV, Solvents, Corrosion, Fungus & Impact Resistant

• Holds One 14 x 35.6 cm Snare Drum
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• For Wireless Mics, Pre-Amps, Effects
• Wood Core / 600-Denier Nylon Covering
• Adjustable Shoulder Strap / Loop Handle
• 37.6 cm Depth (Front Rail to Back Flap}
• Padded Front, Back Lids

• Reinforced nylon trigger release latching system
• TSA recognized and accepted locks
• Bumper protected valance
• Indestructible cushioned rubber over-molded handle
• Full length neck support

• Rubber Over-Molded Handle
• Trigger Release Latching System
• Fitted Interior & Full Neck Support
• Deluxe Plush Protection
• Accessories Compartment
• Fits Most Right Handed "P" & Jazz Styles

• 600-Denier ballistic gig bag
• 20mm padded interior
• Fully adjustable padded straps
• Large accessory pocket on outside
• Heavy duty comfort handles

• Holds up to 45.4 kg of Gear
• Roto-Moulded Polyethylene
• Shockmounts Provide 5 cm Sway Space
• 61 cm Rugged Steel Rack Frame
• Moulded-In Rib Design

• Rugged Nylon Exterior
• Protective Tricot-Lined Interior
• 10mm Dual-Layer Padded Protection
• External Storage Pockets
• Integrated Cord Management
• Removable Shoulder Strap

• Rugged Nylon Exterior
• Protective Tricot-Lined Interior
• 10mm Dual-Layer Padded Protection
• External Storage Pockets
• Integrated Cord Management
• Removable Shoulder Strap

• For Covering Sonicview 24XP Mixer
• Durable Light Polyester Fabric
• Protects from Dust and Dirt

• 8 Panel Mounts with Pressed in Brass Inserts
• O-Ring Seals
• Mounting Screws
• Drill Guide
• Drill Bit

• Fits B-Flat Clarinet
• Hard Exterior Case
• Lightweight Molded Case

• Bumper Protected Valance
• Injection Molded Feet
• Comfortable Carring Handle
• Full Length Neck Support
• Accessories Compartment

• Durable 600 Denier nylon multi-use Gig bag

• Unique battery pocket with extra space
• Detachable front pocket for up to 6 wireless receivers
• 2 detachable external pouches and 3 internal rubber bands to hold wireless receivers
• 2 detachable carrying handles and padded shoulder strap
• 2 extra padded sponges to position wireless receivers inside the bag

• Lid Holds Two Bows
• Perfect Fit Valance
• D-Ring for Strap
• Reinforced Latches

• Perfect fit valances with D-Ring for strap
• Reinforced with backplates - these latches are mounted forever
• Plush lined storage compartment

• Perfect Fit Valances
• Storage Compartment
• Reinforced with Backplate
• Lid Holds Two Bows

• New fiberglass reinforced nylon trigger release latching system.
• TSA recognized and accepted locks
• Bumper protected valance
• Indestructible cushioned rubber over-molded handle

• EPS foam interior with plush for protection
• Hardware reinforced with backplates - these latches are mounted forever
• Exterior Length: 21.75 in (55.25 cm)
• Exterior Width: 9.88 in (25.08 cm)
• Exterior Depth: 7.88 in (20.00 cm)

• Laminated zippered clear mesh pockets
• Polyester-lined iPad/Laptop top-load pocket
• Hook-and-loop with adhesive backing

• Laminated zippered clear mesh pockets
• Polyester-lined iPad/Laptop top-load pocket
• Hook-and-loop with adhesive backing

• Wider Interior for Leg Hardware
• Heavy-Duty Web Strap for Reliable Closure
• Sturdy High Tension Slide Release Buckle
• Diameter: 18.75 in (47.63 cm)
• Interior Depth: 15.75 in (40.01 cm)

• Stackable
• Pedestal Feet
• Padded Interiors
• Sturdy High Tension Slide Release Buckle
• Heavy-Duty Web Strap

• Padded Interiors
• Heavy-Duty Web Strap
• Sturdy High Tension Slide Release Buckle
• Pedestal Feet
• Grip Handles with a 90° Stop

• Stackable
• Pedestal Feet
• Padded Interiors
• High Tension Slide Release Buckle
• Heavy-Duty Web Strap

• Sackable
• Pedestal Feet
• Padded Interiors
• High Tension Slide Release Buckle
• Heavy-Duty Web Strap
• Patented Roto-X Pattern

• Holds One 11 x 13" Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• Holds One 12 x 14" Tom or Snare
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning
• Heavy-Duty Web Strap / Reliable Closure

• Holds One 8 x 10" Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• Holds One 8 x 8" Tom
• Rotationally Moulded Polyethylene
• Roto-Moulded-X Design / Stackable
• Padded Interior for Added Protection
• Pedestal Feet for Upright Positioning

• Perfect Fit Valances
• Reinforcing Latches
• Neck and mouthpiece bags
• Shoulder Strap Loops

• Valences for Creating Secure Fit
• Reinforced Latches
• Neck and Mouthpiece Bags

• Holds up to 45 kg of Gear
• Roto Moulded Polyethylene
• Shock Mounts Provide 5 cm Sway Space
• 61 cm Rugged Steel Rack Frame
• Moulded-in Rib Design

• Holds up to 43.4 kg of Gear
• Roto Moulded Polyethylene
• Shock Mounts Provide 5 cm Sway Space
• 61 cm Rugged Steel Rack Frame
• Moulded-in Rib Design

• Fits Deeper Analogue and Digital Mixers
• Provides Excellent Performance Height
• Roto-Moulded from Polyethylene/Uni-Body
• Four Locking Casters
• 7-Degree Angled Steel Rails/12 RU Spaces

• Holds "Rack-able" Equipment
• Three Vertical Rack Units
• Multiple Applications
• Rail-To-Rail Depth of 27.2 cm
• Steel Front & Rear Threaded Rails

• Holds "Rack-able" Equipment
• Four Vertical Rack Units
• Multiple Applications
• Rail-To-Rail Depth of 27.2cm
• Steel Front & Rear Threaded Rails

• Shock Resistant
• 1.25" Sway Space in Front / Rear of Case
• Threaded Steel Rails
• Roto Moulded for Strength
• Adjustable Elastomer Shock Absorbers
• Moulded-In Handles

• Consumer installable caster kit
• Four 4" lockable casters
• Compatible with select cases
• Roto moulded polyethylene

• Moulded-in bumpers
• Field replaceable components
• Sure-grip handle
• Roto-moulded indestructability

• Fits the 1SKB-R104 Audio DJ Rack
• Fits Most Eight Space Slant Top Racks
• Retractable shelf
• Sturdy hook and loop surface
• Convenient height

• Steel rack ears for durability
• Mounting hardware included
• Exterior Length: 19.00 in (48.26 cm)
• Exterior Width: 5.00 in (12.70 cm)
• Exterior Depth: 1.25 in (3.18 cm)

• Fashioned out of Semi-Hard EVA
• Padded to Protect Mixer from Shock
• Stores Mixer & Accessories
• Stretch Bands Affix Mixer in Place
• Includes Spacer for Smaller L-12
• Includes Padded Shoulder Strap

• Rear Rails
• Shock Resistant
• Optional Caster Kit
• Roto Molded for Strength
• Adjustable Elastomer Shock Absorbers
• Molded-in Handles Provide Secure Grasping Points