Cinegears 6-405 Ghost-Eye 400ME Wireless HD & SDI Video Transmitter with Data Encryption

Description

The Cinegears 6-405 Ghost-Eye 400ME Wireless HD & SDI Video Transmitter with Data Encryption transmits uncompressed HD video and audio from 1,312 to 3,280' (400 to 1,000m). It comes with added security encryption that ensures no data is lost during transmission. With both 3G and HDMI inputs and outputs, using frequencies between 5.1 to 5.9 GHz as needed (up to four simultaneously), you can utilise the video transmission for professional applications. The transmitter unit ensures complete encryption of data during transmission. This transmitter can support up to four receivers and can be arranged in point-to-point and point-to-multi-point networks.

Features

• Uses licence-free 5 GHz ISM frequency band, maximum four frequency channels with automatic or manual selection, coexists with Wi-Fi
• Supports wireless 10-bit HD video with no compression and no delay from 1,312 to 3,280' (400 to 1,000m)
• Uncompromised picture quality with low latency less than 1 ms
• Supports point-to-point, and point-to-multipoint network topology
• Supports up to four receivers
• Cross-compatible with Ghost-Eye 100M, 150M, and 300M transmitters and receivers
• Highest resolution 10-bit colour depth 4:2:2, 1080p 60 fps HDMI and 3G/HD/SD-SDI input and output
• Supports HDMI to SDI cross-conversion
• Supported professional audio formats include Dolby True HD, DTS-master, and more
• SDI/HDMI input from digital cinema cameras, HD SDI video cameras, and other digital devices
• AES-128 encryption with air interface HD video data stream
• HDMI 1.4 with EDID support
• Supports timecode and tally for broadcast or live event streaming production
• Built-in ultra-silent intelligent fan prevents heat and moisture damage
• Supports wide-range power voltage input, adapts most kinds of camera batteries with optional V-Mount, Gold mount (Anton Bauer), or 1/4" bolt mount battery plates
• Comes with five external antennas with RPSMA socket
• Supports all input and output ports with ±8 kV ESD protection level (HBM, contact discharge)
• Plug-and-play hardware design without need for software, firmware upgradable via mini USB port
• Professional standard two-pin Lemo power plugs
• Built-in LCD screen displays for device and signal status
• Water and mist-proof, shockproof production case with foam insert for easy transportation (available separately)
• COE, FCC, RoHS certified product, safe to use worldwide