We are closed Friday 29th March & Monday 1st April for Easter

Cinegears 1-102 Single Axis Wireless Follow Focus Express Standard Kit

Product #59910 | SKU 1-102 | Cinegears
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Features

  • Wireless Express Focus Controller
  • Standard Wireless Lens Control Motor
  • 3 x Mounting Brackets
  • 4 x Replacement Gears
  • Gear Re-Locator

Description

Providing a complete single-axis lens control system packed in a hard case, the Single Axis Wireless Follow Focus Express Standard Kit  from Cinegears allows you to set up a wireless lens control motor and controller system on your camera system equipped with geared lens and either 15mm or 19mm support rods. The lens controller does not have physical hard stops, but it does allow you to adjust the end points to programme focus stops. The kit includes two 5cm rod clamps with mounting brackets, one each 15mm and 19mm rod clamps, allowing you to mount the included lens control motor on either size rod. The third clamp is approximately 7.6cm long and mounts to a 19mm rod, or a 15mm rod using the included adapter bushing.

In addition to the replaceable cinema-style drive gear that comes with the lens control motor, the kit includes four different replacement gears with gear MODs of 0.5, 0.6, 0.8, and 1.0, in case you have to drive lenses with non-cine-style gearing or plastic lens gears. The included gear re-locator allows you to use lenses that focus in the opposite direction from standard, without having to alter your focus-pulling technique for those lenses. The kit fits into a waterproof case with foam inserts to protect your equipment during transport and storage.

The Cinegears Single Axis Wireless Express Controller is a wireless follow focus controller that easily pairs with a Cinegears wireless motor. You can use the controller for focus, zoom, or iris. The controller operates on a frequency of 433 MHz, providing a range of up to 97.5m line of sight. The wireless controller and optional motor combination provide simple auto lens calibration and manual lens remapping for easy lens changes.

The Express Controller features a removable marking disc, a side mounted index marker, and allows you to programme up to four stop / positions. You can adjust the transition speed for programmed presets, and with optional cables connected to your motor, you can control start/ stop for ARRI, RED, Sony, and Canon professional camcorders. LED indicator lights show you the status of the controller.

The Cinegears 5cm Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your Cinegears lens control motor on your rods and drive your lens's geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.

The Cinegears 5cm Rod Bracket for Lens Control Motors mounts on a 19mm support rod and allows you to mount your Cinegears lens control motor on your rods and drive your lens's geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.

The Cinegears 7.9cm Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your Cinegears lens control motor on your rods and drive your lens's geared focus, zoom, or iris ring. It features two spring-loaded locking levers; one that allows you to tighten the bracket on the rod, and a second locking lever that secures the motor to the clamp.

The Cinegears Magnetic Bevelled Marking Disc for Express Controller is specifically made to work with a Cinegears Express controller, and only the Express controller. It magnetically mounts on the controller and incorporates a slot for a corresponding index pin, which prevents the marking disk from spinning on the controller, ensuring your marks stay accurate. The disk is made to be used with either dry or wet erase marker for easy cleaning and re-marking.

The Cinegears 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors features 4 lightweight plastic gears that allow you to drive most geared cine or ENG-style lenses. The gears can replace the original aluminium drive gears for Cinegears lens motors, providing a cost effective solution to handle surprises in the field.

Each gear is only 38mm in diameter, and features a captive mounting screw. The smaller diameter of the replacement gear, as compared to the standard drive gears, may provide smoother movement as you drive the lens with your motor. Each gear is labelled allowing you to easily select the right gear for your lens. The gear marked 0.8 is for cine-style lenses. Gears marked 0.5 and 0.6 are standard for ENG-style lenses.

The Cinegears Motor Gear Re-Locator consists of a chrome plated stainless steel spacer that allows you to position your drive gears about 1.27cm from the normal gear location when using your Cinegears motors. The spacer is made of the same material, chrome-plated stainless steel, as the inside of the Cinegears metal gear to prevent gear stripping.Included with the gear spacer is an attachment screw, which is needed to attach your drive gear to your motor with the spacer in place.

The Cinegears Single Axis Wireless Motor Power Cable provides power to your motor from an optional power source outfitted with a D-tap connector. The cable features a D-tap connector on one end and a 2-pin LEMO connector on the other. The cable features plastic insulation, and it can handle from 12 to 28 VDC.

The Cinegears Hard Case with Foam Inserts for Single-Axis Kit is a waterproof case that provides protection to your equipment from damage from falls and impact. The custom cut foam interior allows you to keep the components of your single axis wireless kit snug and secure during transport and storage.

Features

  • The wireless controller features an internal LiPo battery that can run the controller for approximately 20 hours on a single charge. You can operate the controller while simultaneously charging it. Charging is via a mini USB connector, and it supports input voltage range of 12 to 30 VDC.

  • The controller supports auto-calibration, manual calibration, and lens remapping.

  • After calibration, the end stops are automatically slightly shortened, preventing you from pinning the lens.

  • You can programme focus pre-sets into the controller and then transition between the focus points at the push of a button with adjustable transition speed.

  • Manual calibration allows you to set close and far distance stops when using an infinitely rotating lens

  • Provides height adjustment when used with an optional Cinegears Lens Control Motor.

  • The 15mm clamp is designed to work specifically with 15mm support rods.

  • The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

  • Provides height adjustment when used with an optional Cinegears Lens Control Motor.

  • The 19mm clamp is designed to work specifically with 19mm support rods.

  • The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

  • Provides height adjustment when used with an optional Cinegears Lens Control Motor.

  • The 15mm clamp is designed to work specifically with 15mm support rods

  • The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

  • Approximately 112cm long

  • LEMO connector prevents polarity reversal when use with Cinegears motor.

Specifications

Single Axis Wireless Express Controller
Material of Construction Aluminium and steel alloy
Construction CNC machined, black anodised coating
Frequency 433 MHz (RF)
Battery LiPo
Charging Voltage Input: 12 to 30 VDC
Operating Temperature 0 to 40°C
Storage Temperature -20 to 50°C
Dimensions 14.6 x 7.0 x 7.0 cm
Weight Approximately 0.5 kg
5cm Rod Bracket for Lens Control Motors (15mm)
Material of Construction Hard anodised aluminium
Steel slide
Length 5 cm
Rod Clamp Type 15mm
5cm Rod Bracket for Lens Control Motors (19mm)
Material of Construction Hard anodised aluminium
Steel slide
Length 5 cm
Rod Clamp Type 19mm
7.9cm Rod Bracket for Lens Control Motors (15mm)
Material of Construction Hard anodised aluminium
Steel slide
Length 8 cm
Rod Clamp Type 15mm
Magnetic Bevelled Marking Disc for Express Controller
Material of Construction PVC
Dimensions Internal Diameter: 6.0 cm
External Diameter: 7.0 cm
Height: 1.2 cm
Weight 30.0 g
4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors (0.5, 0.6, 0.8, 1.0)
Gear Standard Gear 1 MOD: 0.5

Gear 2
MOD: 0.6

Gear 3
MOD: 0.8
Pitch: 32

Gear 4
MOD: 1.0
Diameter 38 mm
Motor Gear Re-Locator
Material of Construction Chrome plated stainless steel
Width 12.7 mm
Single Axis Wireless Motor Power Cable
Connector 1 P-Tap/D-Tap
Connector 2 2-pin LEMO
Length 113 cm
Weight 30 g
Hard Case with Foam Inserts for Single-Axis Kit
Material of Construction PVC
Dimensions 27.5 x 22.5 x 13.0 cm
Weight 1.6 kg

In The Box

  • Single-Axis Wireless Motor
  • Single Axis Wireless Express Controller
  • 5cm Rod Bracket for Lens Control Motors (15mm)
  • 5cm Rod Bracket for Lens Control Motors (19mm)
  • 9cm Rod Bracket for Lens Control Motors (15mm)
  • 2 x Magnetic Beveled Marking Disc for Express Controller
  • 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors (0.5, 0.6, 0.8, 1.0)
  • Motor Gear Re-Locator
  • Thumb Screw
  • Single Axis Wireless Motor Power Cable
  • Hard Case with Foam Inserts for Single-Axis Kit

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Cinegears 1-102 Single Axis Wireless Follow Focus Express Standard Kit
  • Manufacturer: Cinegears
  • Model: Express
  • SKU: 1-102
  • RM Product #: 59910
  • Warranty: 1 year manufacturer warranty

Recently Viewed

View All