Cinegears 1-202 Multi-Axis Wireless Follow Focus Kit
Features
- Wireless Multi-Axis Wireless Controller
- 3 x Wireless Multi-Control Motors
- Wireless/Wired Receiver
- 6 x Mounting Brackets
- Motors Mount onto 15 or 19mm Rods
Description
The complete wireless lens control solution for your camera rig. The Cinegears 1-202 Multi-Axis Wireless Follow Focus Kit includes a Cinegears Multi Axis Wireless Hand Controller, a Cinegears Wireless Receiver, 3x Cinegears Wireless Lens Motors, REC (start/stop) triggers for Arri, Sony, Lanc, Black Magic, Canon, and Red Epic cameras, and all the accessories you will need to use your kit right away. This kit comes in our waterproof hard case with foam inserts.
The Cinegears Multi Axis Lens Control System
The complete wireless lens control solution for your camera rig. This system includes a Cinegears Multi Axis Wireless Hand Controller, a Cinegears Wireless Receiver, 3x Cinegears Wireless Lens Motors, REC (start/stop) triggers for Arri, Sony, Lanc, Black Magic, Canon, and Red Epic cameras, and all the accessories you will need to use your kit right away. This kit comes in our waterproof hard case with foam inserts.
The Cinegears Multi Axis Wireless Hand Controller
Control your lens focus, iris, and zoom with precision from up to 100 meters away. Our controllers work with jib, Steadicam, MoVI, and Gamble stabilizer shots, allowing you to perform with precision without sacrificing the mobility of your cameras or the integrity of the shot. Four focus presets can be programmed and accessed with the press of a single button, and recording can be controlled with the integrated record button. Shoot continuously for up to 20 hours on a single charge with a quick-charge lithium battery.
The Cinegears Multi Axis Wireless Receiver
Drive up to 6 Cinegears Lens Control Motors, as well as providing REC (start/stop) control, Stereoscopic 3d filming support, and an option for wired control. The receiver mounts to your rig on a rail by quick clamp, and is powered using the 2-PIN1B to 2-PIN0B cable. Keep an eye on your parameters easily with a backlit LED screen. The receiver also has the option of being connected to the hand controller via a 4-pin lemo cable (included).
Any focus kit is only as good as its motors, which is why the Cinegears multi axis lens motors are held to strict performance benchmarks for noise, torque, and design. With a hidden antenna and reduced overall size compared to our single axis motors, the Cinegears multi axis lens motor does not compromise performance; motor power and transmission distances are the same. The motors laterally lock on to 19mm and 15mm rail systems, avoiding the need to remove your matte box and other rail accessories. With a built in receiver, remote record, and interchangeable gear heads (m 0.4 to m 1.0), the Cinegears Wireless Standard Motor is ideal for practically any lens setup imaginable.
Specifications
Multi-Axis Motor | |
Material of Construction | Black anodised CNC machined aluminium and steel alloy |
Maximum Peak Torque | 0.85 Nm |
Maximum Speed | 2.8 rev/sec |
Connectors | 1 x 5-pin LEMO jack |
Power Input | 12 to 28 VDC |
Operating Temperature | 0 to 40°C |
Storage Temperature | -20 to 50°C |
Dimensions | 11.4 x 3.2 x 5.1 cm |
Weight | 350 g |
Multi-Axis Wireless Receiver | |
Material of Construction | CNC Machined aluminium and Steel |
Finish | Black anodised |
Frequency | 433 MHz (RF Band) |
Input Voltage | 12 to 28 VDC |
Operating Temperature | 0 to 40°C |
Storage Temperature | -20 to 50°C |
Dimensions | 13.5 x 11.5 x 8.5 cm |
Weight | 0.40 kg |
Multi Axis Wireless Follow Focus Controller | |
Frequency | 433 MHz RF |
Operating Distance | 100 m |
Supported Battery Types | Lithium-ion battery, 5 V |
Required Battery | 1 x Internal |
Construction | CNC machined |
Coating | Black anodised coating |
Material | Aluminium and steel alloy |
Operating Temperature | 0 to 40°C |
Storage Temperature | -20 to 50°C |
Dimensions (H x W x D) | 14.6 x 6.9 x 6.9 cm |
Weight | 570 g |
2" Rod Bracket for Lens Control Motors (19mm) | |
Material of Construction | Hard anodised aluminium Steel slide |
Length | 5 cm |
Rod Clamp Type | 19mm |
3.1" Rod Bracket for Lens Control Motors (15mm) | |
Material of Construction | Hard anodised aluminium Steel slide |
Length | 8 cm |
Rod Clamp Type | 15mm |
Magnetic Bevelled Marking Disc for Express Controller | |
Material of Construction | PVC |
Dimensions | Internal Diameter: 6.0 cm External Diameter: 7.0 cm Height: 1.2 cm |
Weight | 30.0 g |
4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors (0.5, 0.6, 0.8, 1.0) | |
Gear Standard | Gear 1 MOD: 0.5 Gear 2 MOD: 0.6 Gear 3 MOD: 0.8 Pitch: 32 Gear 4 MOD: 1.0 |
Diameter | 38 mm |
Motor Gear Re-Locator | |
Material of Construction | Chrome plated stainless steel |
Width | 12.7 mm |
Single Axis Wireless Motor Power Cable | |
Connector 1 | P-Tap/D-Tap |
Connector 2 | 2-pin LEMO |
Length | 113 cm |
Weight | 30 g |
Power Cable for Multi-Axis Wireless Receiver | |
Length | 100 cm |
Connector 1 | D-Tap |
Connector 2 | 5-pin LEMO |
In The Box
- 3 x Multi-Axis Motor
- Lens Drive Gear
- Multi-Axis Wireless Receiver
- Multi Axis Wireless Follow Focus Controller
- 3 x 5cm Rod Bracket for Lens Control Motors (19mm)
- 3 x 7.9cm Rod Bracket for Lens Control Motors (15mm)
- 2 x Magnetic Beveled Marking Disc for Express Controller
- 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors (0.5, 0.6, 0.8, 1.0)
- 3 x Motor Gear Re-Locator
- Thumb Screw
- Single Axis Wireless Motor Power Cable
- Power Cable for Multi-Axis Wireless Receiver
- Multi Axis Receiver Antenna
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Cinegears 1-202 Multi-Axis Wireless Follow Focus Kit
- Manufacturer: Cinegears
- Model: 1-202
- SKU: 1-202
- RM Product #: 59877
- Battery: Lithium-Ion Included
- Warranty: 1 year manufacturer warranty