DATAPATH Fx4 Display Controller with Four HDMI Outputs

Description

The DATAPATH Fx4 Display Controller with Four HDMI Outputs allows you to create and deploy small, mid-level, and large-scale signage projects for retail stores, stadiums, public spaces, and other environments. It features two HDMI inputs, one DisplayPort input, a DisplayPort loop output, and four genlocked HDMI outputs. The inputs support up to 4096 x 2160 at 60 fps resolution signals. The outputs support up to 1080p60 resolution. The loop output also supports up to 4096 x 2160/60 resolution and carries the original signal unchanged. There are also two Ethernet ports that allow connecting to a network. Only one port needs to be connected, while the other allows daisy-chaining by looping out. In addition to all these connections, there is a genlocked sync input on a BNC connector that allows syncing with 3rd-party hardware.

Capable of adjusting all scale factors, the Fx4 is designed as a flexible, standalone control device. A different region of the input image can be selected for each output, with cropping, scaling, rotation, and frame rate conversion done internally. The regions can be set to overlap to allow any output to replicate another. The regions can also be configured to support any creative splice of the source material, allowing for non-rectangular screen arrangements as well as varied mixes of monitor orientations.

The Fx4 includes a download of the DATAPATH Wall Designer software for Mac and Windows. Wall Designer is a multi-screen design tool that lets you add new displays, visualise the displays' content by adding inputs and adjusting regions, and programme one or all Fx4 devices over a USB or Ethernet connection.

The Fx4 also allows users to pre-load an image for immediate display in those cases when the media source or cables malfunction and no signal is being received.

Key Features:

• Create and deploy small to large-scale signage projects for retail stores, stadiums, public spaces, and other environments.
• Two HDMI inputs and one DisplayPort input supporting up to 4096 x 2160/60 resolution.
• DisplayPort loop output locked to input resolution.
• Four genlocked HDMI outputs supporting up to 1080p60.
• Two Ethernet ports for connecting to a network (the second is for daisy-chaining)
• Genlocked sync input on a BNC connector.
• Independent region selection per output.
• Internal cropping, scaling, rotation, and frame rate conversion.
• Region overlapping support.
• Support for non-rectangular screen arrangements and varied mixes of monitor orientations.
• Includes DATAPATH Wall Designer software for Mac/Windows (download)
• Image pre-load support for immediate display in case of source or cable malfunction.
• HDCP 1.4 support on all inputs and outputs.