dbx DriveRack 260 Loudspeaker Management System has been discontinued, here are some related products you might like:
dbx DriveRack 260 Loudspeaker Management System
Features
- AEQ, Filtering, Polarity, and Delay
- Gain and Crossover Control
- Compression and PeakStopPlus Limiters
- Graphic and Parametric Equalisation
Description
The dbx DriveRack 260 Loudspeaker Management System is a processor designed for complete system control of equalisation, dynamics, and routing possibilities in live or contractor sound applications. Its powerful processing includes both a linkable 28-band graphic and a 9-band parametric AEQ, while system dynamics are controlled by the built-in compressor. Further component protection is provided by DBX's PeakStopPlus limiters, which help protect against too much power and sudden transient spikes.
Before users adjust the AEQ, they may want to utilise the internal pink noise generator and real time analyser to get familiar with the room acoustics. In addition, an easy to assign, flexible alignment time delay and handy 15V phantom powered mic input are also provided for further room management and control.
The goal of a high-quality control processor is to help "dial in" a room and contribute to the overall system performance without directly interfering with audio integrity. Custom templates are built-in for specific amplifier and speaker combinations with user setups easily adjusted using the Wizard setup system and complete DriveWare GUI control.
An outstanding tool for maximising audio quality in a number of environments, the DriveRack 260 is derived from an already proven series of processors and continues the tradition of providing flexible system control using simple, intuitive interfaces.
Features
- Compression and limiting
- Graphic and parametric equalisation
- Full bandpass, crossover, and routing configurations
- Feedback elimination
- Built-in sub-harmonic synthesiser
- Pink noise generator and full-time RTA
- 2.7 seconds of alignment and zone delay
- Auto-AEQ function
- Auto gain control
Specifications
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | 110 dB unweighted >107 dB weighted |
Input Connections | 2 x XLR female 1 x XLR RTA Mic |
Output Connections | 6 x XLR male |
Input Impedance | >40 kOhms |
Output Impedance | 120 Ohms |
Maximum Input Level | 34 dBu with input jumpers in +30 position |
Maximum Output Level | 22 dBu |
Sample Rate | 48 kHz |
RTA Mic Phantom Voltage | 15 V |
Crosstalk (Main Outputs) | >100 dB |
THD & Noise | 0.002% typical at +4 dBu, 1 kHz, 0 dB input gain |
In The Box
- dbx DriveRack 260 Equalization and Loudspeaker Control System
- Power Cord
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: dbx DriveRack 260 Loudspeaker Management System
- Manufacturer: DBX
- Model: 260
- SKU: DBX260V
- RM Product #: 52627