DPA Microphones d:vote 4099 Classic Touring Kit, 4 Mics and Accessories for Normal SPL has been discontinued, here are some related products you might like:
DPA Microphones d:vote 4099 Classic Touring Kit, 4 Mics and Accessories for Normal SPL
Overview
Description
The d:vote 4099 Classic Touring Kit, 4 Mics and Accessories for Normal SPL from DPA Microphones is a complete solution for capturing instruments or vocals in recording and live sound reinforcement applications. It is ready for on-the-road-use such as for rental companies, musicians, theaters, touring companies, and more. It offers a wide selection of microphones and accessories selected for typical use.
The classic touring kit includes four 4099 instrument microphones with MicroDot connectors, four DAD6001BC MicroDot to 3-pin XLR (P48) with belt clip adapters, four miniature microphone cables, four clips for violin, two clips for cello, one clips for guitar, one clips for trumpet or sax, one universal clip, one clip for bass, and a Peli case for transport.
This kit features a detachable lightweight cable from gooseneck to XLR adapter and makes it convenient to mount the microphone on an instrument before connecting it. The low profile and unobtrusive design provides uncompromised sound quality and accurate dynamics for the majority of instruments. Standard gooseneck length is 5.5" (140mm) and can be altered with the optional gooseneck extension (sold separately) to add another 50% to the length.
Key Features
- The flexible clip-on system provides fast, stable, and repeatable positioning. The mics can be easily positioned at different angles via the flexible gooseneck to match different radiation patterns and allow a variety of sound nuances
- Ready for on-the-road-use for rental companies, musicians, or theaters
- The close microphone placement to sound levels like violins or guitars requires microphones with normal sensitivity in order not to clip the following input stages
- The kit includes magnet mounts, universal mounts, and offers a variety of mounting solutions
Specifications
Transducer Type |
Pre-Polarized Condenser |
Polar Pattern |
Supercardioid |
Principle of Operation |
Pressure Gradient |
Frequency Range |
20 Hz to 20 kHz +/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz |
Sensitivity |
2 mV/Pa; -54 dB Reference: 1 V/Pa (Nominal, +/- 3dB) |
Equivalent Noise Level |
Typ. 28 dB(A) Reference: 20 µPa (Maximum 31 dB(A)) (A-Weighted) |
Signal to Noise Ratio |
66 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) |
< 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine |
Dynamic Range |
95 dB |
Maximum SPL |
152 dB (Peak Before Clipping) |
Output Impedance |
MicroDot: 30 to 40 Ω XLR: 100 Ω |
Cable Drive Capability |
XLR: 984' (300 m) |
Output Balance Principle |
Signal balanced with XLR adapter |
Power Supply |
Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter |
Current Consumption |
MicroDot: 1.5 mA XLR Adapter: 3.5 mA |
Connector |
MicroDot |
CMRR |
XLR Adapter: > 60 dB @ 50 Hz to 15 kHz |
Polarity |
Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating Temperature |
-40° to 113°F (-40° to 45°C) |
Relative Humidity |
Up to 90% |
Gooseneck |
Length: 5.5" (140 mm) |
Capsule Diameter |
0.2" (5.4 mm) |
Microphone Length |
1.8" (45 mm) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones d:vote 4099 Classic Touring Kit, 4 Mics and Accessories for Normal SPL
- Manufacturer: DPA Microphones
- Model: VO4-CLASSIC
- SKU: VO4-CLASSIC
- RM Product #: 20818