Dangerous Music Monitor SR
Overview
Description
The Dangerous Music Monitor SR is a 1U rack mountable device designed by mastering engineers to expand the monitoring functionality of the Dangerous Music Monitor ST. The unit enables 5.1 surround sound monitoring. Additional Monitor SR units can be connected and configured for surround sound formats such as 7.1, 10.2, or greater. For I/O, the unit has 25-pin D-Sub connectors for Input 1, Input 2, Input 3, Input4, output Speaker 1, output Speaker 2, output Speaker 3/Sub, and metre feed. The SR unit connects to the Monitor ST via two included ribbon cables. Both devices can be controlled using the Monitor ST remote control over Cat-5 cable. The device is hand built in the USA with mastering grade components to exacting standards.
Features
Analogue Stepped-Attenuator Volume Control
Provides accurate and repeatable volume adjustments without the loss of imaging found in digitally controlled amplifier and voltage controlled amplifier circuit designs
4 Input Sources
Allows you to switch between your DAW outputs, DVD player, CD player, tape machines, or other sources
3 Speaker Outputs
Switch between up to 3 sets of monitors
Programmable Gain Offsets
Adjust and store level offsets for different sources
Input Level Compensation
Instantly adjust for -10dBV and +4dBu sources when working with consumer devices
Continuously Variable Level Offset for Input 4
Compensates for commercial CD levels so you can perform true A/B comparisons
Programmable Input Gain Offsets
Fine-tune and store level offsets to achieve apparent equal loudness on all control room speakers with trims for left and right rear, centre, and LFE
Selectable Subwoofer Filtering
Selects and stores different subwoofer filtering options for each set of speakers
Comprehensive Speaker Mute, Dim, and Solo
Mutes, dims and solos speakers in any combination
Onboard Cue Amp
Provides 20W of headphone monitoring
Flexible Stereo Cue System
Offers main and auxiliary inputs for cueing your mix
Selectable Source Output
Sends source signals to external devices such as a level metre
Talkback System with Dual Control and Dedicated Slate Output
Gives the producer his or her own talkback button and lets you send the slate output to a powered speaker for open-air talkback
DC Coupled
Built without transformers that would colour or filter caps that would smear the stereo image of your sound
Ground and Hum
Includes a ground jumper with adjustable position for removing the buzz sometimes caused by grounding issues
Specifications
Connections | Input 1: 1 x 25-pin D-Sub connector Input 2: 1 x 25-pin D-Sub connector Input 3: 1 x 25-pin D-Sub connector Input 4: 1 x 25-pin D-Sub connector Speaker 1: 1 x 25-pin D-Sub connector Speaker 2: 1 x 25-pin D-Sub connector Speaker 3/Sub: 1 x 25-pin D-Sub connector Metre Feed: 1 x 25-pin D-Sub connector To Monitor ST: 1 x 25-pin D-Sub connector From Monitor ST: 1 x 25-pin D-Sub connector Remote In: 1 x RJ45 port Remote Through: 1 x RJ45 port |
Accuracy | Gain Tracking: better than 0.05dB for 6 channels |
THD + N | 0.002% |
IMD | 0.003% |
Frequency Response | 1 to 100,000 Hz at -0.1 dB |
Crosstalk Rejection Typically @ 1 kHz | >96 dB |
Nominal Input Level | +4dBu or -10dBV |
Crossover | -3dB at 57 Hz 18 dB/octave modified Butterworth/Chebyshev curve |
Headphone Amp | 0.002% THD+N |
Headroom | +25 dBu to main outputs |
Dimensions (H x W x D) | 1.75 x 19.00 x 9.50" (4.45 x 48.30 x 24.10 cm) |
Weight | 10.5 lb (4.76 kg) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Dangerous Music Monitor SR
- Manufacturer: Dangerous Music
- Model: MONITOR SR
- SKU: MONITOR SR
- RM Product #: 47985