DigiTech JamMan XT Vocal Looper
Features
- 10 minutes of Loop Time
- Syncs with Compatible Pedals
- Unlimited Overdubbing
- Built-In Mic Preamp
- 24-bit / 44.1 kHz
Description
The DigiTech JamMan XT Vocal Looper is designed specifically for vocalists to create loops for vocal harmonies or backing tracks. You can connect a dynamic or condenser microphone to the XLR inputs, which are fed through a built-in preamp with optional phantom power. The JamMan samples audio at 44.1 kHz and delivers a balanced signal at 24-bit resolution through the XLR outputs.
You can use the JamMan to create multiple overdubbed vocal loops via its metal footswitch. With 10 minutes of looping time, unlimited overdubs, and a feature for syncing up to other compatible pedals, you can extend your multi-tracking capabilities. The JamMan can be used either as a slave to compatible external devices or as a master controller of those devices. The three LEDs indicate when you are in record, play, or overdub mode.
With the mic trim and loop output level controls, you can fine tune your volume and gain. The Undo and Redo functions allow you to remove or reinstate your last recorded loop. Additionally, you can clear entire phrases when the loop is not playing, allowing for silences in between phrase building.
The JamMan vocal XT runs on an included power supply and is housed in a durable metal chassis.
Features
- 10 minutes of looping time
- Unlimited overdubs with Undo and Redo
- Built-in dbx mic preamp
- XLR input and output
- 48 V phantom power
- Input level control
- 24-bit / 44.1 kHz
- Additional multi-tracking with auto-sync feature
- Record, Overdub, and Play LED indicators
- Silent Clear disengages playback when erasing loops
- Metal chassis
Specifications
Input Jacks | 1 x XLR 1 x 1/8" TRS |
Input Impedance | 330 Ohms (balanced) |
Maximum Input Level | -3 dBu (at unity) |
Phantom Power | 45 V |
Input Gain | 0 to 40 dB |
Output Jack | 1 x XLR |
Output Impedance | 100 Ohms unbalanced / 200 Ohms balanced |
Maximum Output Level | -9 dBu |
Controls | 1 x Loop level knob 1 x Mic level control 1 x Footswitch |
Sample Rate and Resolution | 44.1 kHz / 24-bit |
Loop Length | 10 minutes (stereo) |
Frequency Response | 20 Hz - 20 kHz, 0/-3 dB |
Signal to Noise Ratio | -100 dB |
Power Consumption | < 2 W typical |
Current Draw | < 200 mA typical / < 400 mA max |
AC Power | 100 - 240 VAC, 50 / 60 Hz |
Power Adapter | 9 VDC 1.3 A (centre negative) |
Dimensions (L x W x H) | 4.8 x 3.4 x 2.1" / 122 x 87 x 54 mm |
Weight | 0.27 kg |
In The Box
- DigiTech JamMan XT Vocal Looper
- PS0913DC-01 Power Supply
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DigiTech JamMan XT Vocal Looper
- Manufacturer: DigiTech
- Model: JMVXT
- SKU: JMVXT
- RM Product #: 35200