Event 20/20BAS Biamped Monitor - Pair
Overview
Description
The Event Electronics 20/20BAS Biamped Monitor delivers clarity, transparency, and definition. This 2-way front ported speaker offers tonal character and performance strength. The speaker maintains the transducer design and cabinet volume of the traditional 20/20 and improvises on the high and low frequency amplifiers, cabinet bracing, and overall construction to improve audio characteristics, increase dynamics, and extend reliability. With ideas and technologies incorporated from Event’s flagship Opal speaker, this speaker delivers high output, low distortion, and superior dynamics.
The fully discrete class AB amplifiers for the tweeter and woofer provide up to 250W of burst power with less than 0.01% THD (Total Harmonic Distortion). Additionally, sustained high output performance is ensured through a new oversized toroidal power supply that can ensure sustained extreme low frequency reproduction.
Specifications
Frequency Response |
35 Hz to 20 kHz ±2 dB |
Crossover Frequency |
2,300 Hz |
Distortion |
3rd Harmonic At 90 dB SPL, 3.2’ (1.0 m), 500 to 7 kHz: 0.08% At 90 dB SPL, 3.2’ (1.0 m), 200 to 20 kHz: 0.2% At 90 dB SPL, 3.2’ (1.0 m), <200 Hz: 1.5% |
Acoustic |
Output At 3.2' (1.0 m), Long term (80 Hz to 20 kHz): 105 dB At 3.2' (1.0 m), Peak (80 Hz to 20 kHz): 108 dB |
Signal Input |
XLR (balanced) |
Low Frequency Transducer |
Piston Diameter: 7.1" (180.3 mm) Voice Coil Configuration: High temperature single coil Voice Coil Diameter: 1.5" (38.1 mm) Former Material: High-strength polyamide - glass fiber Magnet Type: Ferrite Cone Type: Mineral-filled polypropylene Magnetic Shielding: Bucking magnet and steel cap |
High Frequency Transducer |
Dome Diameter: 1.00" (25.4 mm) Voice Coil Diameter: 0.98" (24.89 mm) Magnet Type: Ferrite Dome Type: Silk Gap Design: Ferrofluid cooled Magnetic Shielding: Bucking magnet |
Frequency Response |
20 Hz to 20 kHz (±0.2 dB) |
Band |
Operating Band Pass: 20 Hz to 2,400 Hz (LF) / 2,400 Hz to 20 kHz (HF) |
Total Harmonic Distortion (THD) |
0.01% 120 W into 4 Ω Load |
Power |
Long Term at 4 Ω: 80 W Burst Power at 4 Ω: 120 W |
Topology |
Output: Class AB |
Trim |
LF: Constantly variable ±3 dB HF: Constantly variable ±3 dB |
Subsonic Filter |
-3 dB at 30 Hz |
Protection |
Driver: Current limiting Temperature: Thermal cut-off switch |
Indicators |
Event badge On mode |
Cooling |
Convection - Aluminum heat sink |
Power Requirements |
Voltage selector 110 to 120 V or 220 to 240 V, 50/60 Hz, 180 VA Power via detachable 3 circuit IEC-type line cord |
Cabinet |
Construction: MDF Low Frequency Vents: Front port |
Dimensions (W x H x D) |
Cabinet: 10.2 x 14.8 x 11.8" (259.0 x 379.9 x 299.7 mm) |
Weight |
Cabinet: 37.48 lb (17.00 kg) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Event 20/20BAS Biamped Monitor - Pair
- Manufacturer: Event Electronics
- Model: EVENT2020BAS
- SKU: EVENT2020BAS
- RM Product #: 18640