FiiO BTR5 Portable High-Fidelity Bluetooth Amplifier (Black)
Features
- Bluetooth Receiver for Wireless Devices
- Built-In Amp and DAC for High-Fidelity
- Supports Multiple Bluetooth Codecs
- Support for NFC Pairing
- Chipset Ensures Stability and Sonics
Description
The black FiiO BTR5 Portable High-Fidelity Bluetooth Amplifier (Black) is a portable Bluetooth amplifier that's designed to give your headphones a robust signal to communicate with compatible devices over Bluetooth 5.0. The device supports AAC, SBC, aptX, aptX LL, aptX HD, and LDAC codecs, while the onboard amplifier and DAC ensures a quality sound that will bring out the best in your music. NFC pairing ensures you can pair with devices more quickly.
Several chips are used to ensure proper digital-to-analogue conversion. A Qualcomm CSR8675 Bluetooth chip supports 24-bit transmission and processing to preserve your music's dynamic range and stability in most locales, preventing dropouts when possible. For the DAC, dual independent ES9218PC chips are used, which provide low levels of distortion and a high signal-to-noise ratio to ensure a sonic experience that is high on nuance and low on sonic impediments. Connect your headphones to the BTR5 by means of the unbalanced 3.5mm stereo jack or 2.5mm balanced stereo jack.
Controls and indicators are on hand, so you always know which input codec is selected at any given time, and so you're always able to switch tracks, make phone calls, start/stop your music, and contact your digital assistant. A built-in microphone allows for hands-free calls. A remote-control app facilitates even more control. In addition to serving as a go-between for headphones and devices, the BTR5 is also a high-quality USB DAC with an independent XMOS XUF208 control chip and USB Type-C connector that can decode up to 384 kHz sampling rates and native DSD. The FiiO BTR5 ships with a USB Type-C charging cable and back clip.
Key Features:
- Dual ES9218P DAC chips
- CSR8675 Bluetooth chip
- FPGA clock management
- Dual independent crystal oscillators
- Bluetooth 5.0 with full format support
- Independent control chip XMOS XUF208
- USB DAC supporting up to 384 kHz and DSD256 native
- Double-sided 2.5D glass with OLED display
- 3.5 and 2.5mm headphone outputs
- Intelligent control with FiiO Music app
- One-touch NFC pairing with supported Android devices
Specifications
Form Factor | Portable |
Number of Headphone Channels | Single Channel |
Recommended Headphone Impedance | 16 to 100 Ohms (Unbalanced) 16 to 150 Ohms (Balanced) |
Headphone Output Power | 1/8" / 3.5 mm Unbalanced: 80 mW into 32 Ohms 2.5 mm Balanced: 240 mW into 32 Ohms |
Digital Chipset | Bluetooth: CSR8675 DAC: 2 x ES9218P USB: XMOS XUF208 |
Display | 0.5" / 1.27 cm OLED |
Connectivity | |
Analogue Audio I/O | 1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output 1 x 2.5 mm TRRS Balanced Headphone Output |
USB | USB Type-C |
Bluetooth | 5.0 |
Bluetooth Profiles | HFP, HSP, A2DP, AVRCP |
Supported Audio Codecs | AAC, LDAC, SBC, aptX, aptX HD, aptX LL |
Performance | |
Frequency Response | 20 Hz to 20 kHz (aptX) 20 Hz to 40 kHz (LDAC) |
Impedance | 1/8" / 3.5 mm Outputs: ≤ 1 Ohms (32-Ohm Load) 2.5 mm Outputs: ≤ 2 Ohms (32-Ohm Load) |
THD+N | Headphone Outputs: < 0.003% (A-Weighted, 1 kHz, LDAC) Balanced Headphone Outputs: < 0.002% (A-Weighted, 1 kHz, LDAC) |
SNR | 1/8" / 3.5 mm Headphone Outputs: ≥ 118 dB (A-Weighted, 32-Ohm Load) 2.5 mm Balanced Headphone Outputs: ≥ 122 dB (A-Weighted, 32-Ohm Load) |
Crosstalk | 1/8" / 3.5 mm Headphone Outputs: ≥ 79 dB (1 kHz, 32-Ohm Load) ≥ 95 dB (1 kHz, Unloaded) 2.5 mm Balanced Headphone Outputs: ≥ 118 dB (1 kHz, 32-Ohm Load) ≥ 119 dB (1 kHz, Unloaded) |
Channel Balance | < 0.1 dB |
Digital Audio | |
Sample Rates | Up to 384 kHz Up to 11.2 MHz (DSD) |
Bit Depths | Up to 32-Bit |
Power | |
DC Input Power | 5 VDC at 500mA (Recommended) |
Internal Battery | Rechargeable, 550 mAh |
Battery Charging Time | 1.5 Hours |
Approximate Battery Life | 9 Hours (Unbalanced Output) 7 Hours (Balanced Output) |
Physical | |
Dimensions | 2.8 x 1.3 x 0.4" / 7.2 x 3.2 x 1.1 cm |
Weight | 1.5 oz / 43.7 g |
In The Box
- FiiO BTR5 Portable High-Fidelity Bluetooth Amplifier (Black)
- USB Type-C Charging Cable
- Back Clip
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: FiiO BTR5 Portable High-Fidelity Bluetooth Amplifier (Black)
- Manufacturer: FiiO
- Model: BTR5
- SKU: BTR5
- RM Product #: 88528