We are closed Friday 29th March & Monday 1st April for Easter

Focusrite RedNet A16R - Dante Networked A-D and D-A Converter has been discontinued, here are some related products you might like:

Focusrite RedNet A16R - Dante Networked A-D and D-A Converter

Product #44756 | SKU REDNET A16R | Focusrite
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Overview

16-Channels Analog Input/Output, Network and PSU Redundancy

Description

The RedNet A16R from Focusrite adds to the company's range of 1U Dante-equipped interfaces with network and power supply redundancy. The unit provides sixteen channels of analogue input and output with high-quality 24-bit/192 kHz analogue-to-digital and digital-to-analogue audio conversion, plus two channels of AES/EBU digital input and output to and from the Dante network.

The electronically balanced analogue audio inputs and outputs are available via DB25 connectors wired to AES59 specifications, with the internal signals balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, the two channels of AES digital input/output are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit can be internal, or external via Wordclock or DARS, with the unit also outputting Wordclock.

The convertor features power and network redundancy, with two separate universal (100~240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to redundant or switched (daisy-chain) mode.

Features

  • Sixteen channels of line-level analogue input/output
  • 24-bit Focusrite conversion up to 192 kHz
  • Internally balanced throughout
  • Dante-based remote-controlled audio-over-IP connectivity
  • Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
  • Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU input/output
  • Analogue input/output to AES59 standard on DB25 connectors
  • Comprehensive front-panel indicators
  • Software-based routing and control – no hardware patching required

Specifications

Analogue Inputs Line Inputs: 16
Connectors: 2 x DB25 female, wired to AES59
0 dBFS Reference Levels: +18 or +24 dBu (switchable)
Frequency Response: 20 Hz to20 kHz, +/-0.05 dB
THD+N: <0.001% unweighted; -1 dBFS input, 20 Hz to 22 kHz
Dynamic Range: 119 dBA (-60 dBFS method)
Convertor Dynamic Range: 120 dB
Signal-to-Noise Ratio: 119 dBA; 20 Hz to 20 kHz
Analogue Outputs Line Outputs: 16
Connectors: 2 x DB25 female, wired to AES59
0 dBFS Reference Levels: +18 or +24 dBu (switchable)
Frequency Response: 20 Hz to20 kHz, +/-0.05 dB
THD+N: <0.001% unweighted; -1 dBFS input, 20 Hz to 22 kHz
Dynamic Range: 119 dBA (-60 dBFS method)
Convertor Dynamic Range: 120 dB
Signal-to-Noise Ratio: 119 dBA; 20 Hz to 20 kHz
Crosstalk Input or Output to Input: <-90 dB (all other channels at 0 dBFS)
Input or Output to Output: <-100 dB (all other channels at 0 dBFS)
Sample Rate Conversion Sample Rate Range: 32 to 216 kHz
Gain Error: -0.3 dB
Dynamic Range: >138 dB
THD + N: <-130 dB (0.00003%)
Latency: 11 to 45 samples (network and sample rate dependant)
Digital Performance Sample Rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz (-4%/-0.1%/+0.1%/+4.167%) @ 24-bit
Clock Sources: Internal or from Dante Network Master
External Word Clock Range: Nominal sample rate +/-7.5%
Digital I/O Channel Count: 2 x 2 AES/EBU channels
Input (optional DARS): 1 x XLR3F (switchable with analogue input channels 15 and 16 at quad rates)
Output: 1 x XLR3M (duplicate of analogue output channels 15 and 16 at quad rates)
Wordclock Input: 1 x BNC 75 Ohms (switchable termination)
Output: 1 x BNC 75 Ohms
Network Connectors: 2 x etherCON connectors, also compatible with standard RJ45 connectors
Redundant mode allows unit to connect to two independent networks
Switched mode connects both ports to integrated network switch allowing daisy-chaining of devices
Power Requirements 2 x IEC inputs with retaining clips
100~240 VAC, 50/60 Hz
41W consumption
Dimensions 19 x 12.8 x 1.7" (482 x 352 x 43 mm)
Weight 10.6 lb (4.8 kg)
Packaging Infoyqqdusbttattcqwvcqfftewqedzcrtrq
Package Weight 14.5 lb
Box Dimensions (LxWxH) 23.6 x 17.1 x 4.5"

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Focusrite RedNet A16R - Dante Networked A-D and D-A Converter
  • Manufacturer: Focusrite
  • Model: REDNET A16R
  • SKU: REDNET A16R
  • RM Product #: 44756
  • Warranty: 3 year manufacturer warranty

Recently Viewed

View All