Godox FT-16 Radio Trigger Set for Witstro Flashes has been discontinued, here are some related products you might like:
Godox FT-16 Radio Trigger Set for Witstro Flashes
Features
- Wireless synchronous flash
- Power, wireless control flash 16 packets
- Supports two types of power display mode
- Easy to install
Description
This Godox flash trigger supports flash grouping and remote flash power control.With sensitive reactions and stable signal transmission, it applies to flashes with the wireless control port, such as, Godox Wistro AD-180 & AD-360, Godox QT series and Gemini GT & GS series studio flashes, as well as specific camera flashes. It is also compatible with Godox Cells series transceiver.
Features
- Power, wireless control flash 16 packets
- Remote control lamp and focus lamp, and a buzzer switch
- Wireless synchronous flash
- Large area of liquid crystal display, clear and easy to understand
- Receiver mini light, flash power supply, without battery
- 50 meters above the maximum sync speed regulation range, 1/250 seconds
- Supports two types of power display mode (5.010.0 or 1/11/128)
- Easy to install and use the camera control in hot shoe on demand
Wireless adjusting flash settings
The trigger set can wireless adjust the following settings: the flash power ratio, the on-or-off of the buzzer and the modeling lamp or the AF-assist beam, as well as the power-ratio display mode.
On the transmitter and the receiver, set the channel select switch to the same position and the Power Control Group Select Dial to the same grade.
Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
Adjust the flash settings on your transmitter.
Wireless Triggering the Flash
On the transmitter and the receiver, set the Channel Select Switch to the same position
Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
Press the Test Button to fire a flash. Alternatively, you can set the transmitter onto the camera's hot shoe and press the camera's shutter-release button to fire a flash.
Support flash
Witstro series flashes, QT series flashes, Gemini GT & GS series studio flashes, DE series flashes, DP series flashes
Support camera
Canon, Nikon, Pentax, Olympus
Specifications
| Power supply of transmitter | 3V (two Ni-MH or alkaline AA batteries) |
| Power supply of receiver | 5V from flash or strobe via USB |
| Radio frequency | 433 MHz |
| Effective distance | 50 meters / 164 ft in open area |
| Control on flashes | (depends on compatibility of flash / strobe models) |
| Max. sync speed | 1/250s |
| No. of channels | 16 |
| Net weight | 85g |
| Only receiver | approx. 20g |
| Transmitter Dimension | 98 x 50 x 37 mm |
| Receiver Dimension | 57 x 30* x 27 mm |
| Transmitter Power Supply | 3V (2*AA Ni-MH or alkaline batteries) |
| Receiver Power Supply | 5V (Powered by flashes) |
| Transmit Frequency | 433MHz wireless remote system |
| Workable Distance | 50m/164ft (open areas) |
| Control on flashes | Flash power ratio |
| Max. Sync Speed | 1/250 second |
| Channel | 16 |
| Net weight | A set: approx. 85g Only receiver: approx. 20g |
| Transmitter Dimension | 98 x 50 x 37 mm |
| Receiver Dimension | 57 x 30 x 27 mm |
In The Box
- 1 x FT-16 Transmitter
- 1 x FTR-16 Receiver
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Godox FT-16 Radio Trigger Set for Witstro Flashes
- Manufacturer: Godox
- Model: GD-FT-16
- SKU: GD-FT-16
- RM Product #: 51902
- Warranty: Click here for warranty terms view terms
Recently Viewed
View AllGodox FT-16 Radio Trigger Set for Witstro Flashes
