We are closed Friday 29th March & Monday 1st April for Easter

INOGENI SHARE 2U USB/HDMI Mixer and Capture Device

Product #53431 | SKU SHARE2U | Inogeni
Contact us for an ETA what does this mean?
Not currently for sale
Contact us for more information
Contact us for an ETA what does this mean?

Overview

Mix two channels of HD video over USB or HDMI and capture them with the INOGENI SHARE 2U USB/HDMI Mixer and Capture Device

Description

Mix two channels of HD video over USB or HDMI and capture them with the INOGENI SHARE 2U USB/HDMI Mixer and Capture Device . Dual USB inputs and single HDMI input are available (only two can be used simultaneously). 1080p30 uncompressed video is accepted over HDMI, MJPEG and H.264 video formats from POV and webcams are supported via USB.

The built-in video mixer can show one input or the other, or display both inputs in side-by-side, big and small, and picture-in-picture configurations. All video processing is done using hardware, so video quality remains high latency is minimal. The advantage to using a mixer like the SHARE 2U is the ability to show more than one video input on teleconferencing software such as Skype, Zoom, Webex, and GoToMeeting with one-touch controls. Unique to the SHARE 2U is the incorporation of an HDMI mixed output in addition to the USB connection. With this connection, you can send mixed feeds to your computer for recording or teleconferencing, while simultaneously sending video to a projector or monitor.

Control over the device can be taken using the host PC, or remotely via RS-232 and Ethernet. DVI to VGA, and DVI to HDMI adapters are included for connecting to common computer outputs.

Features

OEM and System Developer Friendly

The device may be controlled by INOGENI's app or via an included API so you can design your own. You can read the sources status, presence, format, modify the EDID, update the firmware, and ask for custom functionalities. You can also get Crestron modules to control the device using the LAN or serial interface.

General Features
  • Mixer feature: Hardware mixer into a single USB 3.0 interface
  • Control interface: LAN, RS-232, USB
  • Local and remote keypad
  • USB 2.0 cameras and HDMI capture
  • HDMI output for preview
  • Line level stereo audio support
  • Digital Fluid technology: Internal frame buffers maximise frame rate with any host
  • Hardware-based colour space and sampling conversion
  • Compatible with Windows, OS X, Linux and Android

Specifications

Input
Video Inputs 2 x USB 2.0 Type-A
1 x HDMI type A

Note: Only two inputs can be active simultaneously
Frame Rates Up to 60 fps, all formats
Colour Space RGB, YCbCr, 4:4:4, and 4:2:2 (USB only supports RGB)
Sampling Rate 165 MHz
Analogue Audio Input Analogue stereo, line level, 3.5 mm jack
Analogue Audio Output Analogue stereo, line level, 3.5 mm jack
Remote Control 1 x Phoenix, RS-232
1 x RJ45, Ethernet

Note: Remote control via USB connection is also available
Mixer The Mixer feature can be controlled by the following interfaces: panel control buttons, RS-232, optional INOGENI REMOTE, or HID (Human Interface Device) via USB connection
Output
Connector 1 x USB 3.0 Type-B
1 x HDMI type A
Colour Space YCbCr (YUY2) 4:2:2 8-bit
Video Scaler Automatic hardware based
Colour Space Conversion Automatic hardware based
Sampling Conversion Automatic hardware based
Frame Rate Conversion Automatic hardware based
Audio Input 2-channel LPCM 48 kHz audio from line input or embedded in USB or HDMI
Audio Output 2-channel LPCM 48 kHz audio line level
USB Expansion 2 x extra USB 3.0 ports for expansion purposes (The devices connected will appear to the host)
USB Bandwidth No USB bandwidth limitation
General
Operating Systems No driver installation required
Windows 7 and above (32-/64-bit)
OS X 10.10 and above
Linux (kernel v2.6.38) and above
Android
Host Requirements USB 3.0 port
Minimum 4 GB RAM
Intel Core i5
Graphic card with dedicated memory
Motherboard Compatible with all motherboards
Intel, Renesas, ASMedia, and Fresco Logic
Cameras Supported Cameras and camcorders with an HDMI, DVI, VGA, or CVBS output
Software Compatibility UVC-compliant; runs with all software compatible to DirectShow, AVFoundation, and V4L2
Power 12 V, 700 mA
Operating Temperature 32 to 113°F (0 to 45°C)
Storage Temperature -40 to 221°F (-40 to 105°C)
Relative Humidity 0 to 90% non-condensing
Dimensions 7.3 x 4.4 x 1.2" / 18.5 x 11.2 x 3 cm
Weight 1 lb / 466 g

In The Box

  • Power Adapter
  • DVI to VGA Adapter
  • DVI to HDMI Adapter
  • Limited 2-Year Warranty

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: INOGENI SHARE 2U USB/HDMI Mixer and Capture Device
  • Manufacturer: Inogeni
  • Model: SHARE 2U
  • SKU: SHARE2U
  • RM Product #: 53431

Recently Viewed

View All