JBL VMA260 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier
This product is no longer available
Overview
8-Input Mixer, Supports USB Drives and Bluetooth, 60W, 2-Output Amplifier, Euroblock, RCA, and 1/4" Inputs, Euroblock Outputs, Voice-Activated Ducking
Description
The JBL VMA260 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier is a cost-effective line of Mixer/Amplifiers with low impedance functionality (4Ω, 8Ω) and high impedance 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, ideal for emerging markets.
Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA260 supports voice-activated ducking and priority muting.
Features
- 8 inputs with 2 outputs of 60 or 120-watts of power
- Independent bass and treble controls for each output channel
- 100V and 70V output, or 4Ω/8Ω
- Paging Chime, and Priority muting
- Works with JBL CSR-V wall controllers
- Balanced mic/line inputs; RCA (.775V) inputs
- Rack mounting hardware included
- Euroblock Outputs
Specifications
Output Power | 60 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD) |
Insertion Loss | 70 V and 100 V Outputs: 1 dB maximum |
Input Channels | 8 |
Output Channels | 2 |
Tone Controls | Bass and Treble non-detented potentiometers on each channel Bass: ±14 dB at 50 Hz Treble: ±14 dB at 10 kHz |
Input Sensitivity | To obtain full rated power (load of 8 Ohms) Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms |
Frequency Response | Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB |
Total Harmonic Distortion (THD) | Measured at 2.83 Vrms into rated load impedance at any output Power Amp Output: <0.5%, 20 Hz to 20 kHz |
Signal-to-Noise Ratio | >76 dB (reference rated power, mixer levels at minimum, master volume at maximum A-weighted) |
Input Impedance | Nominal Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms |
Phantom Power | 27 VDC |
Crosstalk | -70 dB (reference rated power, volume at mid position, 1 kHz) |
Nominal Input Voltages | Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz |
Minimum Load Impedance | Low Impedance Output: 4 Ohms 70 V Output: 80 Ohms 100 V Output: 160 Ohms |
Operating Temperature | 0 to 35°C |
Humidity | 95% RH (non-condensing) |
Storage Temperature | -20 to 85°C |
Dimensions (W x D x H) | 432 x 415 x 88 mm |
Weight | 11.6 kg |
In The Box
- JBL VMA260 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier
- Rubber Feet
- Rackmount Kit
- Mounting Hardware
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JBL VMA260 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier
- Manufacturer: JBL
- Model: VMA260
- SKU: VMA260
- RM Product #: 57696