JVC 10Bit- 17" HD LCD Broadcast Production Monitor
Features
- Full HD resolution: 1920 x 1080 pixels
- Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
- Two 3G-SDI & Dual Link inputs
- High 1500:1 Contrast Ratio
- Tilt-able stand with 2-way installation capability
- Built-in Histogram, Waveform, Vector Scope, Zebra
Description
The JVC DT-V17G25 monitor is equipped with a 10-bit IPS LCD panel, which surpasses the EBU Class 2 requirements in terms of colour space, gamma and gradation. The two most critical factors, gamma and grey gradation, have also been improved over previous models to meet the demands of studio and professional application requirements. The monitor has an extremely wide viewing angle, with excellent chromatic aberration properties, with 10-bit processing offering improved grey shades and gradation. The DT-V17G25 features an integrated waveform monitor, vector-scope and histogram, where you can display values for colour saturation, brightness and input signals.
High Picture Quality The DT-V17G25 reproduces highly accurate colours in native 1920 x 1080 resolution. The two most critical factors, gamma and grey-scale gradation, have been improved to meet the demands of production studios and broadcast networks.
High 1500:1 Contrast Ratio 10-bit IPS (In –Plane Switching) Panel The monitor is equipped with a 10-bit IPS LCD panel, which surpasses the EBU Class 2 requirements in terms of colour space, gamma and gradation and is capable of reproducing 1.073 billion colours. It also offers a contrast ratio of 1500:1, wide gamut, and wide viewing angles of 178°/178°.
Analog-based Picture-quality Evaluation Technology plus Contour Enhancer Technology to help eliminate digital aliasing to make pictures look more natural.
Optimized I-P conversion maintains sharp and clear images.
Gamma and White Balance adjustments are set before leaving the factory to maintain quality control for all models.
Accurate colour reproduction: Individual Matrix Parameters assigned for HD and SD input signals plus EBU100% equivalent colour spectrum.
3G-SDI & Dual Link 1080p uncompressed digital video data transmitted at a maximum rate of 60 frames/sec. at 3 GB/sec. Can be input with two HD-SDI inputs. It is also compatible with Dual Link.
Assist Functions for Professionals
Histogram [NEW]: Displays the number of pixels on the vertical axis, and brightness of the video on the horizontal axis.
Lissajous Meter [NEW]: Displays coherence between two audio channels, which useful in showing the stereo field of a signal and possible phase issues.
Waveform: Displays images by detecting brightness signal from video, component and SDI signals. Confirmation of individual color signal level for R/G/B, Y/PB/PR, and Y/CB/CR. At-a-glance peak brightness with Over-level function.
Vector Scope: Simple checking of hue and saturation of video signal can be detected and displayed. Work with video, component, SDI (SD/HD) input signals.
Audio Level Meter: Allows checking the status of HD-SDI embedded audio up to 16 ch inputs by displaying the channel number, reference and over levels, and peak hold.
Specifications
Panel Specifications
Panel size (diagonal in inch) | 16.5 |
Panel resolution | 1920 X 1080 Pixels |
Panel Aspect Ratio | 16 to 9 |
Panel Type LCD | Yes |
Panel Modulation IPS | Yes |
Back-light LED | Yes |
Brightness in cd/m² | 450 |
Panel Bit depth: | 10 |
Image Processing Bit depth | 10 |
Panel response times in ms | 8 ms |
Viewing angle H/V | H 178 / V 178 |
Contrast Ratio | 1500:1 |
IN-OUT´s Connections VIDEO
Input HDSDI | Yes, 3G |
Number of HDSDI Inputs | 2 |
HDSDI DUAL LINK | Yes |
Input HDMI | Yes |
Number of HDMI Inputs | 1 |
HDMI HDCP | Yes |
Input YUV | Yes, 3 x BNC |
Input Composite | Yes |
Numbers of Composite Inputs | 2 |
Loop out HDSDI | Yes, 2 with bridge function |
Loop out Composite | Yes |
IN-OUT connections AUDIO
Audio Line IN | Yes, 2 x RCA and 1 x 3.5mm mini jack |
Audio Embedded Channel out | Yes, selectable |
Speaker integrated | Yes, 2 |
Watts | 2 X 1 Watts |
IN-OUT Connections Controls
GPI IN | Yes, RJ45 |
RS485/422 IN | Yes, RJ45 |
RS485/422 Loop out | Yes |
RS232 IN | Yes, 9 Pin Sub D |
Service Port | Yes, internal |
Supported Signal Formats
HDSDI/SD Signal Formats SMPTE-424M | Yes |
HDSDI/SD Signal Formats SMPTE-425M-A/B | Yes |
HDSDI/SD Signal Formatss BTA S-004C | Yes |
HDSDI/SD Signal Format SMPTE-292M | Yes |
HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002 | Yes |
HDSDI/SD Signal Formats ITU-R BT656 | Yes |
SDI SIgnal Formats SMPTE-259M | Yes |
Signal Format ITU BT601-7 | Yes |
Signal Format SMPTE-299M | Yes |
Signal Format SMPTE-272M | Yes |
HDMI Format 1080P plus | up to 1080P |
Composite | Yes, PAL/NTSC |
Dedicate Functions
SDI Timecode | Yes, LTC, VITC, and D-VITC |
R/G/B/Mono | Yes |
H/V delay | Yes, only with special upgrade |
Field/Frame mode | Yes, Field 1 / Field 2 / Reverse only with special upgrade |
Scan Modes | Progressive,/Field Cinema 3:2 pull down / 1:1 |
Safety area markers | Yes, 80% to 100% |
Center Marker | Yes |
Scale Markers | Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1 |
Area Marker Visibility | OFF,Line,Half,Half+Line |
Tally via GPI | Yes |
Tally Multi-Colour | Yes |
Low Latency Mode | Yes |
Screen saver | Yes |
Environment Power Save function | Yes |
TSL UMD/IMD Support via: | Yes, Serial RS485 |
Function Keys | 2 |
Direct Input Channel buttons | Yes |
Auto Aspect | Yes, Analogue and Digital sources |
OPERATION KEY-LOCK | Yes |
Operation LED Dimmer (Buttons) | Yes |
Direct Brightness/Contrast/Color control | Yes |
Measurement and indication Tools
Waveform | Yes |
Waveform enlargement | Yes |
Waveform subs | R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function. |
Vector-scope | Yes |
Vector-scope enlargement | Yes |
Vector-scope subs | video, component, SDI (SD/HD) input signals. |
Histogram | Yes |
Audio Level Meter | Yes |
Audio Level Meter Channels | 16 |
Audio Level Meter subs | Over Level Indication plus Lissajous Meter |
Calibration and Colour settings
Preset Colour Temperature 9300K | Yes |
Preset Colour Temperature 6500K | Yes |
Preset Colour Temperature 5600K | Yes |
Preset Colour Temperature | USER: Yes |
Manual calibration of Color Temperature (gain or/and cut-off) | Yes |
External Auto-Calibration (Software Tool) | Yes |
External Colormetrie Sensor needed | Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4 |
Calibration Hints | Free Calibration Software in our Support area |
Gamma Levels | 2.2/ ,2.35,/2.45,/2.6 |
Adjustable Back-Light | Yes |
Dedicated Timing Information
Lip-Sync Processing time | < 1 Frame |
MTBF Life-Times
MTBF Panel (Back-light) | 30000 hours |
MTBF electrical | 0 hours |
Power and Environment Specs
Power AC | Yes |
Power consumption | 0.33 Ampere /AC |
Operation Temperature in Celsius | 5C to 35C |
Operation Humidity:(Non-Condensing) | 20% to 80% |
Storage Temperature in Celsius | -20C to 60C |
Storage Humidity (Non-Condensing) | 10% to 90% |
Mechanical Information
VESA Mount | Yes |
VESA Format | 100x100 |
VESA Screw Type in Metric | M4x4mm |
Rack-mount into 19" Format | Yes, optional |
Dimensions W x H x D in mm | W:430mm / H:309mm / D:102mm |
Weight (without stand) in Kg | 5.8Kg |
Weight in Kg | 8.3Kg |
In The Box
- AC Power cord
- Power cord Holder
- Screws
- Setup DVD
- Instruction Manual
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JVC 10Bit- 17" HD LCD Broadcast Production Monitor
- Manufacturer: JVC
- Model: DT-V17G25EAT
- SKU: DT-V17G25EAT
- RM Product #: 93811