JVC DT-V9L5U 8.2" Broadcast Studio Monitor
This product is no longer available
Features
- 8.2"(21 cm) IPS Panel with LED Backlight
- 1280 x 800 Resolution / 800:1 Contrast
- 360 Nit Bright / 160° Viewing Angle
- 3G-SDI, HDMI, Analogue BNC, and RCA Audio
- 16 Channel SDI Audio Level Metering
Description
The JVC DT-V9L5U 8.2" Broadcast Studio Monitor features a 16:10 widescreen, active matrix, TFT LCD with a gloss surface and an LED backlight. The resolution is 1280 x 800, contrast ratio 800:1, and brightness 360 nit. The viewing angle is 160°. The monitor powers by an included AC adapter.
Front panel controls include phase, chroma, brightness, and contrast adjustment knobs, and input selection and marker buttons. The front panel also has a wide-sized tally light, and a second tally light is on the rear.
Features
- 8.2"(21 cm) IPS panel with 1280 x 800 resolution
- Mercury-free white LED backlight
- 800:1 contrast ratio
- 360 nit brightness
- 160 x 160° viewing angle
- 16 channel SDI audio level metering
- Area/Centre/Aspect marker
- SDI timecode display
- Front and rear tally lamps
- 1W internal mono speaker
- AC adapter included
- Tabletop stand included
- Supports Anton Bauer battery plates on the rear
Inputs / Outputs
- Two 3G/HD/SD-SDI inputs and one switched out output
- Bridge-connected Composite BNC input and output
- HDMI input
- Component input on 3x BNCs
- RCA audio input on one connector
- RCA L/R audio output
- Front panel headphone jack
- RJ-45 Make/Trigger
- D-Sub9 RS-232C
Image Analysis Tools
- Waveform
- Vectorscope
- Underscan / Overscan
Specifications
Screen | 8.2" wide, active matrix TFT LCD (21 cm) LED backlight |
Effective Screen Size | W x H x D: 7 x 4.3 x 4.2 (18 x 11 x 21 cm) |
Resolution | 1280 x 800 |
Colours | 16.7 million |
Viewing Angle | 80° H, 80° V |
Brightness | 360 nit |
Contrast Ratio | 800:1 |
Aspect Ratio | 16:10 |
Input & Output | 3G/HD/SD-SDI input (embedded audio supported) 2x auto detecting BNC connectors HD-SDI output switched out (embedded audio supported) 1x auto detecting BNC connector HDMI input: 1x HDMI, HDCP-compatible Composite input/output: 1x line on 2x BNC connectors, 1 V (p-p), 75 Ω The input and output terminals are bridge-connected (auto termination) Component input: 1x line on 3x BNC connectors Y: 1 V(p-p), 75 Ω(with sync) PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω RCA audio input: 1x RCA connector, 500 mV (rms), high impedance RCA audio output: 2x RCA connectors, 500 mV (rms) 500 mV (rms) 1x headphone jack Remote (Make/Trigger): 1x RJ-45, contact or momentary pulse to corresponding terminal Remote (RS-232C): D-Sub9, serial communication |
Format | HD-SDI: SMPTE292M SD-SDI: ITU-R BT.656, SMPTE259M Embedded Audio 16 Ch: SMPTE299M, SMPTE272M |
Timecode | SDI timecode |
Audio Output | Internal speaker: 1 W |
Audio Metering | Digital (up to 16 ch) |
Power Requirements | AC 120 V / AC 220 - 240 V, 50/60 Hz or DC 12 - 17 V Power input: 4-pin XLR AC adapter included |
Rated Current | 0.5 A (AC 120 V) 0.25 A (AC 220 - 240 V) 1.3 A (DC 12 - 17 V) |
Operating Temperature | 5 to 35°C |
Operating Humidity | 20 - 80% (non-condensing) *Slightly variable depending on ambient conditions for installation |
Dimensions | With stand: 8.6 x 8.6 x 7.5" (22 x 22 x 19 cm) Without stand: 8.6 x 7 x 4.7" (22 x 18 x 12 cm) |
Weight | With stand: 3.2 kg Without stand: 2.3 kg |
In The Box
- JVC DT-V9L5U 8.2" Broadcast Studio Monitor
- AC Power Cord
- Tabletop Stand
- Protective Screen Filter with Four Screws
- Power Cord Holder with Two Screws
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JVC DT-V9L5U 8.2" Broadcast Studio Monitor
- Manufacturer: JVC
- Model: DT-V9L5D
- SKU: DT-V9L5D
- RM Product #: 35688