Kingston 16GB HyperX Impact DDR3L 1866 MHz SODIMM Memory Kit (2 x 8GB)

Description

This kit from Kingston provides you with two 8GB HyperX Impact DDR3L 1866 MHz SODIMM Memory Modules , delivering a total of 16GB of memory for notebooks, NUCs, and ultra-compact desktops. This kit is compatible with systems that support 1866 MHz memory and have 204-pin slots. The chips sport sixteen 512M x 8-bit DDR3 FBGA components per module and operate with a CAS latency of 11. In addition, they run on 1.35V of power.

Features

PnP JEDEC Timing Parameters

The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. The maximum speed will be determined by the computer's BIOS.* DDR3-1866 CL11-11-11 @ 1.35V or 1.5V

• DDR3-1600 CL10-10-10 @ 1.35V or 1.5V
• DDR3-1333 CL8-8-8 @ 1.35V or 1.5V

Features

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) power supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 933 MHz fCK for 1866 Mb/sec per pin
• 8 independent internal banks
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional differential data strobe
• Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On die termination using ODT pin
• Average refresh period 7.8us at lower than TCASE 185°F (85°C), 3.9us at 185°F (85°C) < TCASE < 203°F (95°C)
• Asynchronous reset

Specifications