Kupo
Kupo CT-40MK 40" Riser C-Stand Turtle Base Kit (3m, Silver)
- Load Capacity: 10kg
- Max. Height: 296cm
- Min. Height: 134cm
- Weight: 6.9kg
- C-Stand with Removable Base
- 40" Grip Arm
In stock
Ships tomorrow
You Pay:
$349.00
You Pay:
$6.95
Kupo KSD-1680L Sandbag (16kg Capacity, Black)
- Cordex Textured Nylon Bag
- Saddle Bag Design with Top Handle
- Ships Empty, Can Fill with Sand or Shot
- Stabilises Light Stands or C-Stands
- Used as Counterweight on Boom Arms
- Water-Resistant Internal Plastic Liner
Usually ships in 8 - 12 weeks
You Pay:
$49.95
Kupo 198AC Universal Stand (3.8m, Black)
- Maximum Load: 9kg
- Twin Leg Braces
- Aluminium Construction
- 5/8" Top Stud
- Air-cushioned
In stock
Ships tomorrow
You Pay:
$179.00
Kupo CS-40MKB Master C-Stand 40" Riser Sliding Leg Kit (3.2m, Black)
- Load Capacity: 10kg
- Max.Height: 323cm
- Min. Height: 134cm
- Kit Weight: 9.5kg
- 40" Grip Arm
- 2.5" Grip Head
In stock
Ships tomorrow
You Pay:
$319.00
Kupo CT-40MKB 40" Riser C-Stand Turtle Base Kit (3m, Black)
- Load Capacity: 10kg
- Max. Height: 2.96m
- Min. Height: 1.34m
- Weight: 7kg
- C-Stand with Removable Base
- 40" Grip Arm
Usually ships in 8 - 12 weeks
You Pay:
$379.00
Kupo Superior Gaffer Tape 48mm x 13.7m (Black)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)
- Aluminium & Steel
- Four V-Shaped Jaws
- Handle With Roller Bearings
- Non-Slip Aluminium Friction Disc
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo CT-20MB Master C-Stand with Turtle Base (50cm, Black)
- Load Capacity: 10kg
- Max Height: 1.73m
- Min Height: 93cm
- 3 Sections
- Two Spring-Loaded Legs
- Zinc Alloy Base
Usually ships in 8 - 12 weeks
You Pay:
$194.00
Kupo CS-40MK Master C-Stand 40" Riser Sliding Leg Kit (3.2m, Silver)
- Load Capacity: 10kg
- Max.Height: 323cm
- Min. Height: 134cm
- Kit Weight: 9.5kg
- 40" Grip Arm
- 2.5" Grip Head
Usually ships in 8 - 12 weeks
$286.00
You Pay:
$259.00
$286.00
Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread
- Allows Stand Mounting
- Spring-Loaded Locking Knob
In stock
Ships tomorrow
You Pay:
$16.95
Kupo CS-20MB Master 20" Riser C-Stand with Sliding Leg (2m, Black)
- Sliding "Lazy Leg"
- Load Capacity: 10kg
- Maximum Height: 2m
- Minimum Height: 91cm
- 3 x Risers
- 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Kupo KS-479 Super Knuckle VESA Monitor Mount Kit
- Load Capacity: 8kg
- Has Both 75 x 75mm and 100 x 100mm Holes
- Rotate Monitor Vertically/Horizontally
- Central Knob Locks down Both Ball Heads
Usually ships in 8 - 12 weeks
You Pay:
$81.95
Kupo CL-40M 40" Master C-Stand With Sliding Leg and Quick Release System (3m, Silver)
- Load Capacity: 10kg, Sliding Leg
- Zinc Die-Casting, Steel Construction
- Max. Height: 312.9cm, Footprint: 37.4"
- 2 x Risers, 3 x Sections, 5/8" Stud
- Weighs 95cm
In stock
Ships tomorrow
You Pay:
$309.00
Kupo KS-039 Universal Hot Shoe Adapter
- Adjustable Accessory Cold Shoe Mount
- Connects to Standard 1/4"-20 Screw
In stock
Ships tomorrow
$6.95
You Pay:
$6.00
$6.95
Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads
- Double-Sided Stud
- Fits into Any 5/8" Receiver
In stock
Ships tomorrow
You Pay:
$10.95
Kupo 070AC Mini Click Stand (2.1m)
- Load Capacity: 4kg
- Folded Length: 71cm
- Weight: 1.1kg
- Air-Cushioned
- 5/8" Stud
In stock
Ships tomorrow
You Pay:
$129.00
You Pay:
$13.95
Kupo CL-20MK 20" Master Series C-Stand Extended Kit (Silver)
- Turtle Base
- Sliding Leg
- Max Load 10kg
- Quick Release
- Extra Arm
Usually ships in 8 - 12 weeks
You Pay:
$339.00
Kupo CL-40MB 40" Master C-Stand With Sliding Leg and Quick Release System (3m, Black)
- Load Capacity: 10kg, Sliding Leg
- Zinc Die-Casting, Steel Construction
- Max. Height: 312.9cm, Footprint: 95cm
- 2 x Risers, 3 x Sections, 5/8" Stud
- Weighs 6.7kg
Usually ships in 8 - 12 weeks
You Pay:
$309.00
Kupo CT-20MKB 20" Master C-Stand Turtle Base Kit (1.7m, Black)
- 5.7' C-Stand with Removable Base
- 20" Grip Arm
- 2.5" Grip Head
- Load Capacity: 10kg
- Max. Height: 172cm
- Min. Height: 93cm
In stock
Ships tomorrow
You Pay:
$329.00
Kupo SW-03 105cm Long Safety Wire - 0.19" (5mm) Diameter
- Stainless Steel
- Load Rating of 50kg
- Locking "D" Ring Closure
In stock
Ships tomorrow
You Pay:
$8.95
Kupo KCP-730B Super Claw
- 6kg Load Capacity
- Aluminium Construction
- 1/4"-20 and 3/8"-16 Taps
- Rubber-Padded Jaws
Usually ships in 8 - 12 weeks
You Pay:
$42.95
Kupo 023AC Midi Pro Stand (Air-Cushioned, Black)
- Maximum Load: 5kg
- Maximum Height: 2.5m
- Minimum Height: 1m
- 3 x Sections
- Air-Cushioned
- Weighs 1.3kg
In stock
Ships tomorrow
You Pay:
$139.00
Kupo CL-30MKB 30" Master Series C-Stand Extended Kit (Black)
- Turtle Base
- Sliding Leg
- Max Load 10kg
- Quick Release
- Extra Arm
In stock
Ships tomorrow
You Pay:
$379.00
Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female
- Converts 1/4"-20 Stud to 5/8" Baby Stud
In stock
Ships tomorrow
You Pay:
$8.95
Kupo KS-051 1/4"-20 Male to 1/4"-20 Male Thread Adapter
- Turns Female 1/4"-20 to Male 1/4"-20
Usually ships in 8 - 12 weeks
You Pay:
$7.95
Kupo 193 Baby Kit Stand with Square Legs (2.9m)
- Load Capacity: 10kg
- Maximum Height: 2.9m
- Sliding Leg
- Aluminium Construction
- Metal Knobs and Locking Collars
- 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KAB-41K 4-In-1 Nesting Apple Box Set
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
- Smooth Natural Finish
- Full-Sized Box Stores Smaller Sizes
- Side Panel Secures via Two Magnets
In stock
Ships tomorrow
$302.00
You Pay:
$257.00
$302.00
Kupo SW-01 80cm Long Safety Wire -0.14" (3.5mm) Diameter
- Stainless Steel
- Load Rating of 10kg
- Carabiner Closure
In stock
Ships tomorrow
You Pay:
$9.95
Kupo KS-046 Baby 3" Wall Plate, Baby 5/8" Stud
- Eight Anchor Points
- Chrome-Plated Steel Finish
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships tomorrow
You Pay:
$82.95
Kupo 546M K Stand Junior Boom Stand
- Use as Standard Light Stand or Boom Arm
- Boom Extension Range: 155 to 254cm
- Load Capacity at Min. Extension: 30kg
- Load Capacity at Max. Extension: 8kg
- Three Risers / Four Sections
- Pivoting Collar with Adjustable Lever
Usually ships in 8 - 12 weeks
You Pay:
$619.00
Kupo KCP-720B Double Convi Clamp (Black Finish)
- Two Clamps Joined Back-to-Back
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
- Supports up to 20kg
Usually ships in 8 - 12 weeks
You Pay:
$83.95
Kupo KAB-008 Apple Box (Full, 20 x 12 x 8")
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KCP-240 40" Grip Arm With Big Handle (Silver Machined Finish)
- Rough Non-Slip Surface
- Aluminium & Steel
Usually ships in 8 - 12 weeks
You Pay:
$68.95
Kupo CT-40M Master C-Stand with Turtle Base (3m, Silver)
- Load Capacity: 10kg
- Max Height: 3m
- Min Height: 1.34m
- Detachable Base
- 5/8" Stud
In stock
Ships tomorrow
You Pay:
$229.00
Kupo CS-40M Master 40" Riser C-Stand with Sliding Leg (3.2m, Silver)
- For Mounting Lighting Equipment & Tools
- Turtle Base
- Two Telescoping Risers
- Zinc Alloy Casting on Base
- Fast & Easy Set-Up
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Kupo Superior Gaffer Tape 48mm x 13.7m (White)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo MEZ220-BL EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, Blue)
- Pull-Through Design
In stock
Ships tomorrow
You Pay:
$47.95
Kupo KCP-265P Grip Head with Half Coupler
- Fits 2" Outside Diameter Tube
- V-Jaws with Special Tooth Design
- Oversized T-Handle
Usually ships in 8 - 12 weeks
You Pay:
$87.95
Kupo 226M Master Combo HD Stand (3.3m)
- Maximum Load: 40kg
- 3.3m Height
- Levelling Leg
- Steel Construction
- Spring Cushioned
- Multiple Mounting Options
In stock
Ships tomorrow
You Pay:
$349.00
Kupo 161MB Slider Stand (1.2m, Black)
- Load Capacity: 36kg
- Maximum Height: 115.1cm
- Minimum Height: 57.9cm
- Folded Length: 68.1cm
- Footprint: 80cm
- Dual Levelling Legs
Usually ships in 8 - 12 weeks
$389.00
You Pay:
$335.00
$389.00
Kupo CS-20MKB Master C-Stand with 20" Riser and Sliding Leg Kit (2m, Black)
- 6.5' Master C-Stand with Sliding Leg
- 2-1/2" Removable Grip Head
- 20" Grip Arm with Hex Stud
- 2-1/2" Grip Head Fixed on Arm
Usually ships in 8 - 12 weeks
You Pay:
$319.00
Kupo CT-20MK 50.8cm Riser C-Stand Turtle Base Kit (1.7m, Silver)
C-Stand with Removable Base, 50.8cm Grip Arm, 6.35cm Grip Head
In stock
Ships tomorrow
You Pay:
$339.00
You Pay:
$139.00
Kupo KCP-200 2-1/2" Grip Head With Big Handle (Chrome-Plated Finish)
- Aluminium & Steel
- Four V-Shaped Jaws
- Handle With Roller Bearings
- Non-Slip Aluminium Friction Disc
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo 542M Master Cine Stand (3.2m)
- Maximum Load: 40kg
- Maximum Height: 3.2m
- Minimum Height: 1.6m
- Folded Length: 1.34m
- 1-1/8" and 5/8" Receivers, 5/8" Stud
- 138cm Diameter Footprint
Usually ships in 8 - 12 weeks
You Pay:
$409.00
Kupo 310M Low Mighty Stand (2m)
- Maximum Load: 35kg
- Maximum Height: 2m
- Minimum Height: 1m
- Folded Length: 92cm
- 1-1/8" and 5/8" Receivers, 5/8" Stud
- Weight: 7.8kg
Usually ships in 8 - 12 weeks
You Pay:
$319.00
Kupo 198 Universal Stand (3.8m, Black)
- Maximum Load: 9kg
- Twin Leg Braces
- Aluminium Construction
- 5/8" Top Stud
Usually ships in 8 - 12 weeks
You Pay:
$159.00