Kupo: Accessories
Kupo KAB-41K 4-In-1 Nesting Apple Box Set
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
- Smooth Natural Finish
- Full-Sized Box Stores Smaller Sizes
- Side Panel Secures via Two Magnets
In stock
Ships tomorrow
$302.00
You Pay:
$257.00
$302.00
Kupo MEZ220-B EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, Black)
- Pull-Through Design
In stock
Ships tomorrow
$47.95
You Pay:
$40.00
$47.95
Kupo Superior Gaffer Tape 48mm x 13.7m (Black)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo MEZ220-BL EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, Blue)
- Pull-Through Design
In stock
Ships tomorrow
You Pay:
$47.95
Kupo SW-01 80cm Long Safety Wire -0.14" (3.5mm) Diameter
- Stainless Steel
- Load Rating of 10kg
- Carabiner Closure
In stock
Ships tomorrow
You Pay:
$9.95
Kupo SW-03 105cm Long Safety Wire - 0.19" (5mm) Diameter
- Stainless Steel
- Load Rating of 50kg
- Locking "D" Ring Closure
In stock
Ships tomorrow
You Pay:
$8.95
Kupo Superior Gaffer Tape 48mm x 13.7m (White)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo EZ241 EZ-TIE 2 x 41cm Deluxe Cable Ties (10-Pack, Blue)
- Hook-and-Loop Cable Ties
- Double O-Ring Buckle
- Label Panel for Writing
- Washable, UV Resistant
- Tested in Extreme Temperatures
- Life Cycle of More Than 10,000 Closures
In stock
Ships tomorrow
You Pay:
$18.95
Kupo DS01MT Background Paper Drive Set with Metal Chain (Grey)
- 4m Stainless Steel Chain
- Raises and Lowers Backdrop Paper
In stock
Ships tomorrow
You Pay:
$119.00
Kupo Superior Gaffer Tape 48mm x 13.7m (Yellow)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo Superior Gaffer Tape 48mm x 13.7m (Red)
- Natural Rubber Based Adhesive
- Heat Resistant up to 80°C
- For Smooth, Rough and Irregular Surfaces
In stock
Ships tomorrow
You Pay:
$14.95
Kupo KSC-03 Pump Suction Cup with 3/8"-16 Thread (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
$86.95
You Pay:
$65.00
$86.95
Kupo KSD-1680L Sandbag (16kg Capacity, Black)
- Cordex Textured Nylon Bag
- Saddle Bag Design with Top Handle
- Ships Empty, Can Fill with Sand or Shot
- Stabilises Light Stands or C-Stands
- Used as Counterweight on Boom Arms
- Water-Resistant Internal Plastic Liner
Usually ships in 8 - 12 weeks
You Pay:
$49.95
Kupo KAB-008 Apple Box (Full, 20 x 12 x 8")
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo 2346-NK Directors Chair
- Shaped for maximum comfort and smoothness
- Footrest can be removed for folding
- Robust steel hinges
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Kupo KT-1824K Open-End Flag Kit (45 x 60cm)
- Single Black Nett: 45 x 60cm
- Double Black Nett: 45 x 60cm
- Single White Nett: 45 x 60cm
- Double White Nett: 45 x 60cm
- Artificial Silk: 45 x 60cm
- 1/4 Silk: 45 x 60cm
Usually ships in 8 - 12 weeks
You Pay:
$649.00
Kupo 013 Camera Assistant Front Box
- Naturally Finished Beech Wood
- Removable Dividers
- Bottom Slots for Holding a Slate
Usually ships in 8 - 12 weeks
You Pay:
$399.00
Kupo KS-084 Quick Release Adapter (1/4"-20)
- 1/4"-20 Male to Male Adapter
- Spring-Loaded Ball Bearing Mechanism
- Accepts Four Different Top Mounts
Usually ships in 8 - 12 weeks
You Pay:
$28.95
Kupo 119B C-Stand Door Rack
- Holds up to 6 C-Stands
- Attaches to Wall or Truck Door
- Hoops for Bungee Cord
- Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KC-100S 100mm Brake Caster 25.4mm Square (Set of 3)
- Steel Construction
- Brakes
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KSC-12 Pump Suction Cup with 5/8" Baby Receiver (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$88.95
Kupo 015 Apple Box Set (4)
- Wooden Pancake Box: 20 x 12 x 1"
- Wooden Quarter Box: 20 x 12 x 2"
- Wooden Half Box: 20 x 12 x 4"
- Wooden Full Box: 20 x 12 x 8"
Usually ships in 8 - 12 weeks
You Pay:
$299.00
Kupo MEZ220-W EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, White)
- Pull-Through Design
- Five Colour Options
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Kupo KS-470 Super Knuckle with Hex Baby Pin
- Supports 8kg, Modular System
- Interchangeable Accessories Available
- Single Knob Secures Both Ball Joints
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$88.95
Kupo KS-426 Super Knuckle Ball with 3/8"-16 Screw and Locating Pins
- Can Be Mounted on Cage or Handle
- Equipment Doesn't Rotate after Mounting
- Quick Locking Thumbscrew, CNC Aluminium
- Part of Super Knuckle System
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Kupo KD-C25P Owl 25-35mm Cable Clips (4 Pack)
- Flexible Plastic Clips
- Secures Cables on Round Tubing
- Jaw Diameter of 1.0 - 1.4"
- Snap-on Design
Usually ships in 8 - 12 weeks
You Pay:
$6.95
Kupo KH-55MB Ku-Hand Gloves (Medium, Black)
- Goat Leather Top with Padded Mesh
- Heat-Resistant
- Synthetic Leather Palm
- Extra Layer on Palm, Index Finger, Thumb
- Smooth Surface on Fingers
- Excellent for Grip Work, Rigging, Stages
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo EZ241 EZ-TIE 2 x 41cm Deluxe Cable Ties (10-Pack, White)
- Hook-and-Loop Cable Ties
- Double O-Ring Buckle
- Label Panel for Writing
- Washable, UV Resistant
- Tested in Extreme Temperatures
- Life Cycle of More Than 10,000 Closures
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-320 Microphone Boompole Holder
- Mounts on Standard Grip Heads
- Holds Boompole in Fixed Position
- Provides Hands-Free Operation
- Wide Yoke for Stable Positioning
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KS-078 5/8" Baby Stud with 3/8"-16 Male Thread
- Length: 4"
- Textured Non-Twist Stud End
Usually ships in 8 - 12 weeks
You Pay:
$26.95
Kupo KS-147 Baby Receiver to Cheater Baby Pin
- 5/8" Baby Receiver
- 3.2" Long Baby Pin
- For Barndoors & Beauty Dishes
- Chrome-Plated Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$43.95
Kupo KAB-004 Apple Box (Half, 20 x 12 x 4")
- Multi-Purpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KAB-023 Apple Box Seat Cushion (Vertical, 8 x 12 x 2")
- Covers Box in a Vertical Position
- 1000-Denier Textured Nylon Construction
- Comfortable 2" Pad for Seating
- Side-Storage Pocket for Tools
Usually ships in 8 - 12 weeks
You Pay:
$83.95
Kupo MEZ220-R EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, Red)
- Pull-Through Design
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Kupo KD-C40P Owl 40-50mm Cable Clips (4 Pack)
- Flexible Plastic Clips
- Secures Cables on Round Tubing
- Jaw Diameter of 1.6 - 2.0"
- Snap-on Design
Usually ships in 8 - 12 weeks
You Pay:
$7.95
Kupo KH-55LB Ku-Hand Gloves (Large, Black)
- Goat Leather Top with Padded Mesh
- Heat-Resistant
- Synthetic Leather Palm
- Extra Layer on Palm, Index Finger, Thumb
- Smooth Surface on Fingers
- Excellent for Grip Work, Rigging, Stages
Usually ships in 8 - 12 weeks
You Pay:
$42.95
Kupo EZ241 EZ-TIE 2 x 41cm Deluxe Cable Ties (10-Pack, Red)
- Hook-and-Loop Cable Ties
- Double O-Ring Buckle
- Label Panel for Writing
- Washable, UV Resistant
- Tested in Extreme Temperatures
- Life Cycle of More Than 10,000 Closures
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo EZ241 EZ-TIE 2 x 41cm Deluxe Cable Ties (10-Pack, Black)
- Hook-and-Loop Cable Ties
- Double O-Ring Buckle
- Label Panel for Writing
- Washable, UV Resistant
- Tested in Extreme Temperatures
- Life Cycle of More Than 10,000 Closures
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo MEZ220-Y EZ-TIE 2 x 20 cm Simple Cable Ties (50 Pack, Yellow)
- Pull-Through Design
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Kupo EZ241 EZ-TIE 2 x 41cm Deluxe Cable Ties (10-Pack, Yellow)
- Hook-and-Loop Cable Ties
- Double O-Ring Buckle
- Label Panel for Writing
- Washable, UV Resistant
- Tested in Extreme Temperatures
- Life Cycle of More Than 10,000 Closures
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-083 Quick Release Adapter Male Top Mount (3/8"-16)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$14.95
Kupo KSC-10 Pump Suction Cup with 5/8" Swivel Baby Receiver (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo CT-SBS Compact Turtle Base (Silver)
- Provides convenience in transportation
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KCP-620P Petite Clamp for Baby 5/8" (16mm) Tubing
- 5/8" Receiver
- For the 3 and 4 Way Clamp System
Usually ships in 8 - 12 weeks
You Pay:
$37.95
Kupo KC-080S 80mm Brake Caster 22mm Square (Set of 3)
- Steel Construction
- Brakes
Usually ships in 8 - 12 weeks
You Pay:
$77.95
Kupo KC-100G 100mm Brake Caster 30mm Square (Set of 3)
- Steel Construction
- Brakes
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KS-081 Quick Release Adapter Male Top Mount (1/4"-20)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$13.95
Kupo KSC-14 Pump Suction Cup with 1/4"-20 Thread (3")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KS-085 Quick Release Adapter Set (1/4"-20)
- 1/4"-20 Top Mount
- Spring-Loaded Ball Bearing Mechanism
- Accepts Four Different Top Mounts
Usually ships in 8 - 12 weeks
You Pay:
$35.95
Kupo FH30 Quick Reverse Ear for 30mm Square Tube
T-slotted ear designed for dropping in to grip head, black powder coating steel, safety T-slotted ear designed to avoid unexpected drop-off
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo 3-In-1 Nesting Apple Box Set
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 8-Ply Baltic Birch Wood
- Smooth Natural Finish
- Full-Sized Box Stores Smaller Sizes
Usually ships in 8 - 12 weeks
You Pay:
$269.00
Kupo Butterfly Frame Kit (8 x 8')
- Heavy-Duty 1.18" Square Aluminium Tube
- Easy-to-Use Slots and Pin Lock
- Ear-Type Frame Supports, Precise Grip
- Tubes Store Within Frame for Transport
Usually ships in 8 - 12 weeks
You Pay:
$819.00
Kupo KS-033 5" Grip Pin (Old Style)
For use with 2.5" Grip Heads, Enlarged Base Prevents Slipping
Usually ships in 8 - 12 weeks
You Pay:
$18.95
Kupo KCP-712 Wall Spreader Set for Pipe 1-1/2" Schedule 40
- Steel Construction
- Tightens Span of Pipe Between Walls
- Can be Used Vertically or Horizontally
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Kupo KH-06 Butterfly Frame Kit (6 x 6')
- Heavy-Duty 1.18" Square Aluminium Tube
- Easy-to-Use Slots and Pin Lock
- Ear-Type Frame Supports, Precise Grip
- Tubes Store Within Frame for Transport
Usually ships in 8 - 12 weeks
You Pay:
$649.00
Kupo KS-278 Cheese Plate Baby Adapter
- Two 3/8"-16 Female Threads Space 1" Apart
Usually ships in 8 - 12 weeks
You Pay:
$39.95
Kupo KS-344 3/8"-16 ARRI-Style Anti-Rotation Tip for Rocks Arm
- Integrated Knurled Tightening Knob
- Rapid Release
Usually ships in 8 - 12 weeks
You Pay:
$69.95
Kupo KSD-1680S Touch-Fastener Empty Refillable Sandbag (6kg, Black)
- Convenient Closure
- Sturdy Handle and Eyelet
Usually ships in 8 - 12 weeks
You Pay:
$58.95
Kupo KAB-001 Apple Box (Pancake, 50 x 30 x 3cm)
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
Usually ships in 8 - 12 weeks
You Pay:
$74.95
Kupo KSC-05 Pump Suction Cup with Detachable 5/8" Swiveling Adapter (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo KS-736 ARRI-Style Bolt-On Rosette Mount (M6)
- M6 Female Rosette Mounting Thread
- Stainless Steel and Aluminium
- For ARRI Rosette Accessories
Usually ships in 8 - 12 weeks
You Pay:
$53.95
Kupo KCP-614 Adjustable Poly Holder
- Aluminium and Steel Construction
- Holds 3 to 5' Foamcore or Polyboard
- Extendable Clip for Floor Positioning
- 5.7"-Long 5/8" Baby Pin for Grip Heads
- U-Shaped Handle for Easy Moving
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KS-1212 Square Cheese Plate (12 x 12")
- 12 x 12" Heavy-Duty Cheese Plate
- Mount Production Accessories
- Unthreaded 3/8" Holes Spaced 1" Apart
- 4 Corner Holes with 82° Countersink
Usually ships in 8 - 12 weeks
You Pay:
$259.00
Kupo KH-B2436 Wood Cucoloris (Blinds, 60 x 90cm)
- Casts Shadow to Simulate Window Blinds
- Mounts Horizontally or Vertically
- 3/8" Pin
- 10mm Plywood
- Also Known as Cookie
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Kupo KS-118BV Hanger for Medium-Size Stands (1.2m)
- Strong, Durable Steel Construction
- Provides Storage for Light Stands
- Works with Kupo 3- and 4-Way Clamps
- Matte Black Surface Finish
- Pre-Drilled Holes for Wall-Mount Use
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KS-118B Stand Hanger for Studio or Truck (Black, 1.2m)
- Storage Solution
- Steel Construction
- Wall or Autopole Mountable
- Holds Approximately 19 Stands
Usually ships in 8 - 12 weeks
You Pay:
$219.00
Kupo KS-047 Baby Receiver Wall Plate
- Welded 5/8" Baby Receiver
- Measures 3.5 x 6" Base
- Can Also be Used as a Junior Pin
- Chrome-Plated Steel Construction
- 8 x Anchor Points
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KHS-L112 Frame Corner for 1-1/2" Schedule 40 Pipe
- Round Pipe Butterfly Frame Corner
- Steel Ring Welded on Corner
- Heavy-Duty, Chrome-Plated Steel
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KHS-E112 Frame Ear for 1.5" Schedule 40 Pipe
- Chrome-Plated Steel Construction
- Use with 1.5" Schedule 40 Pipe
- Welded Steel Ring for Enhanced Stability
- Designed for Use with Overhead Stands
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KT-058 Strut Channel Adapter with 5/8'' Baby Pin (200kg Payload)
- Hang Lights or Pipe
- Suitable for 1.6" Strut Channels
- Load Capacity: 200kg
- Comes with 5/8" Baby Pin
- Made from Galvanised Steel
Usually ships in 8 - 12 weeks
You Pay:
$87.95
Kupo KS-1010M Mitchell Mount Cheese Plate (10 x 10 x .5")
- CNC-Machined Aluminium Construction
- Mitchell Mount with 4 x Keyways
- 3/8"-16 Threaded Holes
- Countersunk Mounting Holes
Usually ships in 8 - 12 weeks
You Pay:
$239.00
Kupo KS-118BG Hanger for Heavy-Duty Stands (1.2m)
- Strong, Durable Steel Construction
- Provides Storage for Light Stands
- Works with Kupo 3- and 4-Way Clamps
- Matte Black Surface Finish
- Pre-Drilled Holes for Wall-Mount Use
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KAB-002 Apple Box (Quarter, 50 x 30 x 5cm)
- Multipurpose Applications
- For Studio or On-Location Use
- Made of 9-Ply Baltic Birch Wood
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KS-118BT Hanger for Lightweight Stands (1.2m)
- Strong, Durable Steel Construction
- Provides Storage for Light Stands
- Works with Kupo 3- and 4-Way Clamps
- Matte Black Surface Finish
- Pre-Drilled Holes for Wall-Mount Use
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo WS-095 Flat Head Screwdriver with T-Handle
- T-Handle Design for Added Torque
- Flat Head Screwdriver
- For Camera Mounting Screws
- 2" Blade, 3.1" Handle
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KH-12 Butterfly Frame Kit (12 x 12')
- Heavy-Duty 1.18" Square Aluminium Tube
- Easy-to-Use Slots and Pin Lock
- Ear-Type Frame Supports, Precise Grip
- Tubes Store Within Frame for Transport
Usually ships in 8 - 12 weeks
You Pay:
$1,059.00
Kupo Round Knob with 1/4"-20 Female Thread (2.3")
- 3 locking set screws
- Made from lightweight aluminium
Usually ships in 8 - 12 weeks
You Pay:
$20.95
Kupo KS-5520 Rectangular Cheese Plate (5.5 x 20")
- 5.5 x 20" Heavy-Duty Cheese Plate
- Mount Production Accessories
- Unthreaded 3/8" Holes Spaced 1" Apart
- 4 Corner Holes with 82° Countersink
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo 7510 Rectangular Cheese Plate (7.5 x 10")
- 7.5 x 10" Heavy-Duty Cheese Plate
- Mount Production Accessories
- Unthreaded 3/8" Holes Spaced 1" Apart
- 4 Corner Holes with 82° Countersink
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KCP-252 Mounting Coupler (25mm)
- Fits Tube with 0.98" Diameter
- Integrated Cold Shoe
- For 1/4"-20 & 3/8"-16 Accessory Mounting
- Lightweight Aluminium
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KS-734 ARRI-Style Bolt-On Rosette Mount (1/4"-20)
- 1/4"-20 Female Rosette Mounting Thread
- Stainless Steel and Aluminium
- For Sony Cameras Using 1/4"-20
Usually ships in 8 - 12 weeks
You Pay:
$53.95
Kupo KS-472 Super Knuckle with Baby Receiver
- Supports 8kg, Modular System
- Interchangeable Accessories Available
- Single Knob Secures Both Ball Joints
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Kupo KS-425 Super Knuckle Ball with 1/4"-20 Screw
- Can Be Mounted on Camera Cage
- Rubber Pad on Base, CNC Aluminium
- Part of Super Knuckle System
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KS-416 Super Knuckle Ball with 5/8" Baby Pin
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-406 Super Knuckle Hex Stud Ball for Convi Clamp
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Non-Twist Hex 5/8" Pin
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-404 Super Knuckle Ball with 1/4''-20 Male Thread
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$37.95
Kupo KCP-700-FBP Front Box Mounting Plate for Convi Clamp
- Attaches to Optional Convi Clamp
- Easy to Attach and Lock in Place
- Spring-Loaded Safety Catch
Usually ships in 8 - 12 weeks
You Pay:
$65.95
Kupo KSC-102 Vacuum Suction Cup Mount with Cheese Plate (25cm)
- Pumping Suction Cup
- Rubber and Silicone Construction
- Payload: 15kg
- Supplied with Pad Protector
Usually ships in 8 - 12 weeks
You Pay:
$419.00
Kupo KSC-101 Vacuum Suction Cup with Camera Bracket (15cm)
- Pumping Suction Cup
- Loading Weight: 6kg
- Interlocking Device for Fast Setup
- Rubber and Silicone Cup Construction
- Supplied with Pad Protector
Usually ships in 8 - 12 weeks
You Pay:
$579.00
Kupo KSC-09 Suction Cup with 34cm Support Arm
- Suction Cup Diameter: 6"
- Tube Diameter: 2"
- Support Arm Length: 34cm
- Vacuum-Loss Warning Indicator
- Mount Cameras and Equipment on Vehicles
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo KS-CB02 Quick Release Assembly and Camera Plate
- Quick Release Assembly with QR Plate
- 1/4"-20 Camera Mounting Thread
- Gives the Ability to Switch Cameras Fast
- Thumb Latch with Secondary Safety Latch
- 3/8"-16 Tripod Mounting Socket
- Reducer Bushing Included
Usually ships in 8 - 12 weeks
You Pay:
$48.95
Kupo KCP-412 Super Grip Double Baby Receiver
- Super Grip Swivelling Ball Head
- 2 x 5/8" Receivers / 1 1/8" Spigots
- Ratcheting Locking Handle
- Tapped 3/8"-16 Holes for Storing Knobs
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KCP-734B Super Knuckle Claw
- Jaw Adjustable from 3/16 to 3/4"
- Grippy Rubber-Like Interior
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KCP-612 Pipe Boom Rig Kit
- Create a "Menace Arm"
- 4-Piece Kit to Rig a Lighting Boom
- Front, Back, Centre, and Joint Adapters
- 1 x Junior Pin and 2 x Baby Pin Mounts
- D-Rings for Ratchet Strap
- Hooks for Sandbag Counterweights
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Kupo KCP-415 Offset Mounting Plate with Baby (5/8") Receiver
- For Kino Flo 2' and 4' Fixtures
- Stainless-Steel Ball with 5/8" Receiver
- Replaces Kino Flo 41K Mount
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo KCP-413 Holder for Kino Flo Fluorescent Lamp
- Dual Steel Clips Hold a Single Tube
- Swivel Ball Joint for Tilting
- 5/8" Baby Pin
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KCP-410 5/8" Super Grip Finger
- Chrome-Plated Construction
- Ball Head with 5/8" Baby Pin
- 360° Rotation | 115° Tilt
- Ratcheting Locking Handle
Usually ships in 8 - 12 weeks
You Pay:
$99.95
Kupo KCP-404 Twist-Lock Mounting Plate for Four T12 Lamps
- Twist-Lock Plate w/ Rubberised Clips
- 3/8" Spaced Holes for Cheese Plate
- Lightweight Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KCP-402 Twist-Lock Mounting Plate for Two T12 Lamps
- Twist-Lock Plate w/ Rubberised Clips
- 3/8" Spaced Holes for Cheese Plate
- Lightweight Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$99.95
Kupo 123B Telescopic Pole Studio Support (1.1-3m)
- Adjustable from 1.1-3m
- Female Tap at Each End for Light Stands
- Supports Paper Roll up to 2.74m in Width
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KT-2436K Open-End Flag Kit (60 x 90cm)
- Single Black Nett: 60 x 90cm
- Double Black Nett: 60 x 90cm
- Single White Nett: 60 x 90cm
- Double White Nett: 60 x 90cm
- Artificial Silk: 60 x 90cm
- 1/4 Silk: 60 x 90cm
Usually ships in 8 - 12 weeks
You Pay:
$789.00
Kupo KS-706 ARRI WCU-4 Monitor Mount and Docking Bracket
- Comfortable Handgrip
- Handgrip Incorporates Baby Pin Receiver
- Two Points of Articulation
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Kupo KS-161 Universal Track Ends for Sliders and Dollies
- U-Shaped Track Ends
- Attaches to 2" Pipe
- Supports Track Width from 7.75 to 15.8"
- Mounts on Baby Pin or Junior Receiver
Usually ships in 8 - 12 weeks
You Pay:
$399.00
Kupo KH-C2436 Wood Cucoloris (Breakup, 60 x 90cm)
- Casts Shadow to Add Texture To Light
- Mounts Horizontally or Vertically
- 3/8" Pin
- 10mm Plywood
- Also Known as Cookie
Usually ships in 8 - 12 weeks
You Pay:
$269.00
Kupo KH-C1824 Wood Cucoloris (Breakup, 45 x 60cm)
- Casts Shadow to Add Texture To Light
- Mounts Horizontally or Vertically
- 3/8" Pin
- 10mm Plywood
- Also Known as Cookie
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KH-B1824 Wood Cucoloris (Blinds, 45 x 60cm)
- Casts Shadow to Simulate Window Blinds
- Mounts Horizontally or Vertically
- 3/8" Pin
- 10mm Plywood
- Also Known as Cookie
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Kupo KS-105 Swiveling Adapter with Quick Release Camera Mounting Plate
- Quick Release Camera Mounting Plate
- 1/4"-20 Camera Screw
- Double Ball Joint
- Ratcheted Handle
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KS-075 Adapter Stud to 3/8"-16 Thread
- Knurled 5/8" Stud, Male 3/8"-16 Threads
- Solid Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KS-073 Male Adapter Stud 5/8" with 3/8"-16 Female Thread
- Compatible with Convi and Super Clamps
Usually ships in 8 - 12 weeks
You Pay:
$29.95
Kupo Female KS-064 1/4"-20 to Male 3/8"-16 Adapter Bushing with 1.18" Flange
- Male 3/8"-16 to Female 1/4"-20
Usually ships in 8 - 12 weeks
You Pay:
$33.95
Kupo KS-111 5/8" Adapter with 3/8"-16 Female and 3/8"-16 Male
- Convert 5/8" Receiver to 3/8"-16
- Reversible Male or Female 3/8"-16 Ends
- Solid Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$34.95
Kupo KS-114 1" Conversion Adapter (Set of 5)
- 1/4"-20 Female to 1/4"-20 Male Thread
Usually ships in 8 - 12 weeks
You Pay:
$24.95
Kupo KS-069 Metal GoPro Tripod Mount
- With 1/4"-20 Female Thread
- For GoPro-Style Action Cameras
- Mounts to 1/4"-20 Screw
- GoPro-Style 3-Prong Mount
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-041 Hot Shoe Adapter 3/8"-1/4" with Barrel Adapter
- Holds Photo or Video Accessories
- Accessory Shoe Mount
- Knurled Locking Wheels for Tension
- Double 1/4"-20 Female Barrel Adapter
- 1/4"-20 and 3/8"-16 Male Threads
- Anodised Black Matte Finish
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-038 Hex Adapter
- 1/4"-20 Male and 3/8"-16 Female Threads
- Solid Brass Construction
- Anti-Rotation Hex Design
- Compatible with Super or Convi Clamp
Usually ships in 8 - 12 weeks
You Pay:
$29.95
Kupo KS-148 3-Way Baby Adapter
- Allows Mounting of 3 Lighting Fixtures
- 3 x 5/8" Male Baby Pins
- 1 x 5/8" Baby Receiver
- Transforms into Junior Stud
Usually ships in 8 - 12 weeks
You Pay:
$80.95
Kupo KSF-25 Shot Bag (11kg, Black)
- Stabilises Light Stands or C-Stands
- Bag Filled with 2mm Steel Balls
- Used as Counterweight on Boom Arms
- Made from Cordex Textured Nylon
- Water-Resistant Polyurethane Undercoat
- Saddle Bag Design with Top Handle
Usually ships in 8 - 12 weeks
You Pay:
$219.00
Kupo KSF-15 Shot Bag (6.8kg, Black)
- Stabilises Light Stands or C-Stands
- Bag Filled with 2mm Steel Balls
- Used as Counterweight on Boom Arms
- Made from Cordex Textured Nylon
- Water-Resistant Polyurethane Undercoat
- Saddle Bag Design with Top Handle
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KS-345 Painter's Pole Adapter
- Handheld Option for Overhead Shooting
- 3/4"-5 Thread Screws onto Painter's Pole
- 5/8" Pin with 1/4"-20 Male Thread
- Use with Cameras, Lights, Microphones
Usually ships in 8 - 12 weeks
You Pay:
$62.95
Kupo KSD-77 Sandbag (35kg, Black)
- Stabilises Light Stands or C-Stands
- Ships Empty, To Be Filled by User
- Used as Counterweight on Boom Arms
- Made from Cordex Textured Nylon
- 4 Ladder-Lock Buckles Keep Straps Tight
- Water-Resistant Polyurethane Undercoat
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Kupo KSD-1680M Touch-Fastener Empty Refillable Sandbag (10kg, Black)
- Convenient Closure
- Sturdy Handle and Eyelet
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KS-285 Double Cable Plate for Arca-Swiss And Manfrotto RC2
- Secures Tethered Cable to Tripod Head
- Protects Data Port from Damage
- Prevents Data Transfer Interruption
- Fits Arca-Type or Manfrotto RC2 Receiver
- 2 x Safety Screws for Arca-Type Use
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$58.95
Kupo KT-2436OW White Artificial Silk with Open-Ended Frame (60 x 90cm)
- Steel Frame, Stitched Fabric
- 9.5mm Mounting Pin for Grip Head
- Lowers Contrast, Mild Diffusion
- Open Frame for Clean Light Cut
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KS-474 Super Knuckle
- Modular System
- Interchangeable Accessories Available
- 1 Knob Secures Both Optional Ball Joints
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo KS-412 Super Knuckle Square AMPS Mounting Plate
- Part of Modular Accessory System
- Plate with Ball for Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$48.95
Kupo KS-129 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread
- 3.5" Extra Long 5/8" Baby Stud
- 3/8"-16 Male Thread
- Lightweight Aluminium
- Knurled Finish Prevents Twisting
Usually ships in 8 - 12 weeks
You Pay:
$19.95
Kupo KCP-OF2436 Open End Flag Frame (60 x 90cm)
- Stainless Steel Construction
- Add Preferred Fabric
- Integrated Handle
- Made for Use with Grip Heads
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KCP-OF1824 Open End Flag Frame (45 x 60cm)
- Stainless Steel Construction
- Add Preferred Fabric
- Integrated Handle
- Made for Use with Grip Heads
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KHS-C112 Frame Connector for 1-1/2" Schedule 40 Pipe
- For the Round Pipe Butterfly Frame.
- Steel Welded
- Ergonomic T-Handles, Secure Tightening
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KAB-018 Octagon Hi-Hat Wood Board
- 18 x 18" Plywood Board
- 0.75" Thick
- 5.1" Centre Hole
- Cutout Slots for Hand-Holding
- Cut Corners to Fit in Tighter Spaces
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KCP-724 Wall Spreader
- Fits 2 x 4" Lumber
- Accepts Lumber at Each End of Spreader
- Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kupo KCP-417 Swivel Mounting Plate with 3/8" Pin
- For Kino Flo 2' and 4' Fixtures
- Stainless-Steel Ball Joint with 3/8" Pin
- Replacement Part
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KCP-433 Super Riser (27- 43cm)
- Extends from 27- 43cm
- 360-Degree Rotation & 90-Degree Pivoting
- Black-Anodised Aluminium Construction
- Ball Head with 3/8" Stud
- Opposite End with 3/8" Thread
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KCP-F2436 Closed Flag Frame (60 x 90cm)
- Stainless Steel Construction
- Add Preferred Fabric
- Integrated Handle
- Made for Use with Grip Heads
Usually ships in 8 - 12 weeks
You Pay:
$99.95
Kupo KCP-F1824 Closed Flag Frame (45 x 60cm)
- Stainless Steel Construction
- Add Preferred Fabric
- Integrated Handle
- Made for Use with Grip Heads
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Kupo KH-20 Butterfly Frame Kit (6 x 6m)
- Create 3.6 x 3.6m, 2.4 x 2.4m & 1.2 x 1.2m Frames
- Aluminium Construction
- Includes Safety Wire
Usually ships in 8 - 12 weeks
You Pay:
$2,399.00
Kupo KP-KS06 3/8" Stud with 1/4"-20 Female Thread
- Chrome-Plated
- Knurled Pin for Ease of Use
- Compatible with 1/4"-20 Stands
Usually ships in 8 - 12 weeks
You Pay:
$20.95
Kupo KS-002 1/2" Snap-In Pin
- Adapter for Use with Convi Clamp
- Chrome-Plated
- Hex-End Design Provides a Secure Fit
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-018 5/8" Stud with M10 Thread
- Convi Clamp Adapter
- Attach Threaded End to Yoke
- Butterfly Knob
Usually ships in 8 - 12 weeks
You Pay:
$19.95
Kupo KS-020 5/8" Compact Aluminum Snap-In Pin (Silver)
- Accessory for Kupo Convi Clamp
- For Use with DeSisti & Ianiro Fixtures
- High Tensile Aluminium Construction
- Designed to Prevent Unwanted Rotation
- Polished Silver Finish
Usually ships in 8 - 12 weeks
You Pay:
$15.95
Kupo KS-020B 5/8" Compact Aluminum Snap-In Pin (Black)
- Accessory for Kupo Convi Clamp
- For Use with DeSisti & Ianiro Fixtures
- High Tensile Aluminium Construction
- Designed to Prevent Unwanted Rotation
- All-Black Finish
Usually ships in 8 - 12 weeks
You Pay:
$15.95
Kupo KT-2436FBD Full-Frame Flag (Black Denim, 60 x 90cm)
- Ideal for Altering Contrast
- Used to Block Light from Camera
Usually ships in 8 - 12 weeks
You Pay:
$84.95
Kupo KS-142 1/4" D-Ring Camera Mounting Screw
- Fits any Camera Mounting Accessories
- D-ring Connects with Shoulder Strap
- Weight: 0.7oz (20g)
Usually ships in 8 - 12 weeks
You Pay:
$11.95
Kupo Baby KS-117 Receiver with 1/4"-20 Female Thread Adapter
- 16mm Baby Receiver
- 1/4"-20 Female Tip
- Lightweight 6061 Aluminium Construction
- Die Cast Knob
Usually ships in 8 - 12 weeks
You Pay:
$22.95
Kupo KS-149 Baby Pin with 1/4"-20 Male Thread Adapter
- 5.5" Long Steel Baby Pin
- 1/4"-20 Male Thread
- 1/4"-20 Female Thread
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Kupo KS-115 Double-Ended Brass Spigot
- Made of Solid Brass
- Use with 5/8" Receivers Like Convi Clamp
- Integrated 1/4"-20 Mounting Thread
- Knurled Neck Enhances Ergonomics
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KS-074 Long Double Stud (5/8")
- Double 5/8" Baby Stud
- Chrome-Plated Steel Construction
- Length: 4.9"
Usually ships in 8 - 12 weeks
You Pay:
$16.95
Kupo KAB-048-BST Apple Box Set (Half and Full Size)
- 1 x Half Size, 20 x 12 x 4"
- 1 x Full Size, 20 x 12 x 8"
- For Posing, Standing, Stacking, Support
- Antique Oak Finish, Baltic Birch Plywood
- Central Bracing, Rounded Edges
Usually ships in 8 - 12 weeks
You Pay:
$259.00
Kupo KS-067 Microphone Screw Adapter 3/8"F to 5/8"-27M
- Mount Standard 5/8"-27M Equipment
- Provides Female 3/8"-16 Connector
- Mount Mic to a Lighting Stand or Similar
Usually ships in 8 - 12 weeks
You Pay:
$13.95
Kupo KS-124 Metal GoPro Tripod Mount with 1/4"-20 Male Thread
- With 1/4"-20 Male Thread
- For GoPro-Style Action Cameras
- Mounts to 1/4"-20 Threaded Hole
- GoPro-Style 3-Prong Mount
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Kupo KS-229 VESA Monitor Mounting Plate with 5/8" Baby Pin
- 75 x 75 & 100 x 100mm VESA Plate
- VESA to 4" Fixed 5/8" Baby Pin
- Use to Mount Monitor on Grip Stand
- Collared Mount, Black Aluminium Build
Usually ships in 8 - 12 weeks
You Pay:
$69.95
Kupo 5/8" Baby Stud with 1/4"-20 Screw Mount
- Length: 3.5"
- Mounts Accessories on Grip Gear
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo 403 Ball Head w/ 1/4"-20 Female Thread
- CNC machined aluminium ball head
- 1/4”- 20 Female Thread
- 26mm diameter
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo 024 Baby Stand Extension (60cm)
- Chrome-Plated Steel Construction
- Combo 5/8" Receiver / 1-1/8" Pin
- Anti-Twist 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$72.95
Kupo 018 Baby Stand Extension (45cm)
- Chrome-Plated Steel Construction
- Combo 5/8" Receiver / 1-1/8" Pin
- Anti-Twist 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$62.95
Kupo 006 Baby Stand Extension (15cm)
- Chrome-Plated Steel Construction
- Combo 5/8" Receiver / 1-1/8" Pin
- Anti-Twist 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$58.95
Kupo KWM-0406 Wind Net Mobile Kit (120cm x 180cm)
- Portable Wind Net
- Designed to be Carried by a Grip
Usually ships in 8 - 12 weeks
You Pay:
$369.00
Kupo KWM-0304 Wind Net Mobile Kit (90cm x 120cm)
- Portable Wind Net
- Designed to be Carried by a Grip
Usually ships in 8 - 12 weeks
You Pay:
$319.00
Kupo KS-276 V Mount Battery Adapter for Gimbal Clamp
- Machined Aluminium Alloy
- Attach a V-Mount Battery on your Gimbal Frame
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KS-275 Dual V-Lock Adapter
- CNC Anodised Aluminium
- Two V-lock Wedges
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KS-274 V-Mount Battery Belt Clip Mounting Plate
- Machined Aluminium Alloy
- Belt Clip Style
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KT-1824FBD Full Frame Flag (Black Denim, 45 x 60cm)
- Ideal for Altering Contrast
- Used to Block Light from Camera
Usually ships in 8 - 12 weeks
You Pay:
$72.95
Kupo KS-0606L L-Cheese Plate (15 x 15cm)
- CNC-Machined Aluminium Construction
- 3/8"-16 Threaded Holes
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Kupo KS-057 Offset Baby Wall Plate
- Screw/Nail to Wall, Ceiling, Apple Box
- 8 x Anchor Points for Mounting Plate
- 9" Long Post with Two 5/8" Top Studs
- Chrome-Plated; Plate Size: 3.5 x 6"
- Weight: 2.0 lb
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KS-070 Double 5/8" Female Adapter
- Changes 5/8" Male to 17mm Female Socket
- Female Adapter: 16 to 17mm
- Lightweight Aluminium Construction
- Length: 3"
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KS-512 VESA Mounting Expansion Adapter (100/200)
- VESA Support Adapter for Larger Monitors
- Expands 75 x 75mm or 100 x 100mm Mount
- For 200 x 100mm & 200 x 200mm Sizes
- Allen Key & Screws Included
Usually ships in 8 - 12 weeks
You Pay:
$88.95
Kupo KS-534 VESA Mounting Expansion Adapter (300/400)
- VESA Support Adapter for Larger Monitors
- Expands 75 x 75mm or 100 x 100mm Mount
- For 200 x 300mm & 200 x 400mm Sizes
- For 300 x 300mm & 400 x 400m Sizes
- For Kupo VESA Screen Truss/Other Mounts
- Black Finished 5mm Rolled Steel
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Kupo KSD-1680XL Sandbag (22kg Capacity, Black)
- Cordex Textured Nylon Bag
- Saddle Bag Design with Top Handle
- Ships Empty, Can Fill with Sand or Shot
- Stabilises Light Stands or C-Stands
- Used as Counterweight on Boom Arms
- Water-Resistant Internal Plastic Liner
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KS-346 5/8" Baby Stud Tip for Rocks Arm
- Female Threads on Top of Stud
- Stainless Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$43.95
Kupo KCP-418 Rear Mounting Plate with Twist Lock for Kino Flo 4Bank
- Replacement Plate for Kino Flo 4Bank
- Laser-Marked Lock and Unlock Direction
- Lightweight Aluminium Construction
- Low-Profile Black Finish
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KSC-106 10" Suction Cup with Cheese Plate and 1.5" Starter
- Ideal for Mounting Gear on Cars or Glass
Usually ships in 8 - 12 weeks
You Pay:
$559.00
Kupo KS-201 Junior Baby Adapter
- Welded 1-1/8" Junior Receiver
- Welded 5/8" Baby Receiver
- Solid Steel Construction
- V-Shape Design
Usually ships in 8 - 12 weeks
You Pay:
$74.95
Kupo KAB-128 Lockable Sliding Cover for Full-Size 4-In-1 Nesting Apple Box
- Fits Full-Size 4-in-1 Nesting Apple Box
- Lockable Sliding Cover
- 9-Ply Birchwood Construction
- Smooth Natural Finish
- Keyed Cam Lock with 2 Keys
Usually ships in 8 - 12 weeks
You Pay:
$69.95
Kupo KS-001 3/8" Snap-In Pin
- Adapter for Use with Convi Clamp
- Chrome-Plated
- Hex-End Design Provides a Secure Fit
Usually ships in 8 - 12 weeks
You Pay:
$18.95
Kupo 356-A2816 28mm to 16mm Reducer Adapter
- Converts 28mm Receiver to 16mm Receiver
- Reduces Junior Receiver to Baby Receiver
- Black Anodised Aluminium
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-137 GoPro Tripod Mount with 5/8" Baby Pin
- Adapts GoPro Mount to 5/8" Baby Pin
- For GoPro-Style 3-Prong Mount
- Use with Standard Grip Equipment
- Aluminium & Metal Construction
Usually ships in 8 - 12 weeks
You Pay:
$57.95
Kupo KAB-025 Apple Box Seat Cushion (Horizontal, 20 x 50 x 5cm)
- Covers Box in a Horizontal Position
- 1000-Denier Textured Nylon Construction
- Comfortable 2" Pad for Seating
- Side-Storage Pocket for Tools
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KT-1824OQ Open-Frame Quarter Silk Scrim (45 x 60cm)
- Steel Frame, Stitched Fabric
- Diffuses Light, Lowers Contrast
- No Colour Change, Absorbs 1/2 Stop Light
- 9.5mm Mounting Pin for Grip Head
- Integrated Handle for Easy Grip
- Colour-Coded for Easy Identification
Usually ships in 8 - 12 weeks
You Pay:
$65.95
Kupo KS-154 FREEFLY Toad Male Mount
- For Toad in the Hole Quick Release
- Mounting Solution for Grip Equipment
- 3/8'-16 Female Threads on Bottom
- Includes 3/8"-16 Threaded Stud
Usually ships in 8 - 12 weeks
You Pay:
$85.95
Kupo KS-415 Super Knuckle Ball with 5/8" Baby Receiver
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$50.95
Kupo KS-CB05 Midi Ball Head
- Load Capacity: 4kg
- Weight: 140g
- 1/4"-20 Threaded Camera Mount
- Single-Action Lever Release
- 90° Angle Placement
- 3/8"-16 Mounting Socket with Bushing
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Kupo KSC-33 6" Suction Cup with Swivel Coupler for 2" Pipe
- For 2" Pipe, Made for Vehicle Rigging
- 6" Suction Cup
- Load Capacity: 20kg
- Ball for Rotation
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Kupo KCP-409 Super Grip Finger with 10" Steel Auger Spike
- Chrome-Plated Construction
- 5/8" Baby Receiver on Swivel
- Ratcheting Locking Handle
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo 025 Telescopic Baby Stand Extension
- Maximum Extension: 24"
- Minimum Extension: 15.8"
- Extend Equipment with 5/8" Receiver
- Solid Chrome Steel Construction
- Knurled Neck Design Prevents Slippage
Usually ships in 8 - 12 weeks
You Pay:
$83.95
Kupo 012 Baby Stand Extension (30cm)
- Chrome-Plated Steel Construction
- Combo 5/8" Receiver / 1-1/8" Pin
- Anti-Twist 5/8" Stud
Usually ships in 8 - 12 weeks
You Pay:
$60.95
Kupo DF-500 DMX Controllable Studio Digi Fan
- DMX
- 3500 RPM
- Air Volume of 1700CBM / hr
- Wind Speed of 60KM / hr
Usually ships in 8 - 12 weeks
You Pay:
$2,149.00
Kupo KSC-06 Pump Suction Cup with 5/8" Swivel Baby Pin (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KSC-16 Pump Suction Cup with 5/8" Baby Pin (3")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$89.95
Kupo KH-55XLB Ku-Hand Gloves (X-Large, Black)
- Goat Leather Top with Padded Mesh
- Heat-Resistant
- Synthetic Leather Palm
- Extra Layer on Palm, Index Finger, Thumb
- Smooth Surface on Fingers
- Excellent for Grip Work, Rigging, Stages
Usually ships in 8 - 12 weeks
You Pay:
$42.95
Kupo KSC-04 Pump Suction Cup with 5/8" Baby Pin (15.24 cm)
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo WS-140 Wingnut Multi-Spanner
- Useful Tool in the Rigging Industry.
- Carbon Steel Construction
- Palm-Sized, Lightweight, and Portable
- Three Metric Sizes
- Used for Hex, Wingnut, and Set Screws
- Built-In Bottle Opener and Screwdriver
Usually ships in 8 - 12 weeks
You Pay:
$52.95
Kupo KC-100 100mm Brake Caster M10 Threaded (Set of 3)
- Steel Construction
- Brakes
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KC-080R 80mm Brake Caster 22mm Round (Set of 3)
- Steel Construction
- Brakes
Usually ships in 8 - 12 weeks
You Pay:
$78.95
Kupo KH-55XXLB Ku-Hand Gloves (XX-Large, Black)
- Goat Leather Top with Padded Mesh
- Heat-Resistant
- Synthetic Leather Palm
- Extra Layer on Palm, Index Finger, Thumb
- Smooth Surface on Fingers
- Excellent for Grip Work, Rigging, Stages
Usually ships in 8 - 12 weeks
You Pay:
$42.95
Kupo CXST01 Shoulder Strap for Click Stands
- For Carrying Joined Stands
Usually ships in 8 - 12 weeks
You Pay:
$12.95
Kupo KS-087 Quick Release Adapter Male Top Mount (5/8"-27 Male Thread)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$20.95
Kupo KS-086 Quick Release Adapter Male Top Mount (5/8" Stud with 1/4"-20 Male Threads)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$26.95