Lanparte
Lanparte E6 Battery Dummy Pack
Allows you to power your camera from an external power supply
In stock
Ships tomorrow
$64.95
You Pay:
$34.00
$64.95
Lanparte Red-Tip Camera DC Power Spring Cable for Battery Pinch (3.5/1.35mm)
Flexible PU material, Copper wire conductor
In stock
Ships tomorrow
$10.95
You Pay:
$2.00
$10.95
Lanparte MQR-03 Quick Release Monitor Adapter
Quick release, Anti-rotation design, Light weight
In stock
Ships tomorrow
$88.95
You Pay:
$41.00
$88.95
Lanparte GoPro HERO5 Clamp for LA3D & LA3D-2 Handheld Gimbals
Available to order today
In stock
Ships tomorrow
$38.95
You Pay:
$1.00
$38.95
Lanparte 4-Pin Female XLR 12 VDC Power Adapter Cable for Battery Pinch
Allows you to power any 12 VDC device with a 4-pin XLR connector
In stock
Ships tomorrow
$37.95
You Pay:
$17.00
$37.95
Lanparte D-Tap to DC Power Cable for Blackmagic Camera 24"
Allows you to directly power your 2.5K or 4K Blackmagic camera
In stock
Ships tomorrow
You Pay:
$20.95
Lanparte HDMI to Right-Angle Mini HDMI Cable (26")
Used for connecting your camera to a monitor or HDMI splitter
In stock
Ships tomorrow
You Pay:
$67.95
Lanparte Gear Ring for Follow Focus
Rubber gear with a standard pitch of 0.8 and maximum diameter of 4.1"
In stock
Ships tomorrow
You Pay:
$53.95
You Pay:
$12.95
Lanparte 15mm Aluminum Rod (Pair, 250mm)
Mount Accessories to 15mm Baseplate
In stock
Ships tomorrow
You Pay:
$53.95
Lanparte HDMI-C Coiled HDMI Cable
HDMI (Type-A) to HDMI (Type-A) Coiled Cable, Supports 4K at 60 fps, HD at 240 fps
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$51.95
Lanparte Rosette Handgrip Arri Standard (Pair)
Attaches to ARRI Standard Rosettes, Short Rosette Extension Arm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$649.00
Lanparte LRC-02 Remote Control for Panasonic GH4 and GH5 Cameras
- Wireless Control Over Camera
- Recording Start/Stop Button
- Zoom In/Out Controls for Select Lenses
- Wireless Range of 30m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Lanparte LANC Wireless Controller Kit for Select Sony & Blackmagic Design Cameras
Available to order today
Usually ships in 2 - 3 weeks
You Pay:
$149.00
Lanparte D-Tap to 4-Pin XLR Power Adapter Cable
D-Tap to 4-Pin XLR Connector, 25" Long
In stock
Ships tomorrow
You Pay:
$36.95
Lanparte Yellow-Tip Camera DC Power Spring Cable for Battery Pinch (5.5/2.1mm)
Flexible PU material, Copper wire conductor
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$30.95
Lanparte FW-50P Battery Dummy Pack
Allows you to power your camera from an external power supply
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$70.95
Lanparte ARRI Rosette with Threaded Hole
Designed to connect to an EVF mount or handgrip
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$14.95
Lanparte ARRI Rosette with Un-Threaded Hole
Designed to connect to an EVF mount or handgrip
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$13.95
Lanparte Single Rod Clamp with 1/4" Mount
Mounting solution that clamps onto a 15mm rod
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$41.95
Lanparte Double 15mm Rod Clamp with 1/4" Screw
Mounts on any equipment featuring a 15mm rod system
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$55.95
Lanparte Universal Grip V2 for 15mm Rods
Quick-Release 15mm LWS Rod Clamp, Steel Spindle Joint Locking System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$649.00
LanParte Clamp with Cold Shoe Mount for Samsung T5 SSD
- Compact design perfectly fit Samsung SSD-T5
- Equipped with USB-C cable clamp
- With quick release cold shoe socket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Lanparte BLF19P-01 DC Battery Dummy Pack
Dummy battery that allows you to power your camera
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$51.95
Lanparte Height Raiser Clamp
Clamp which holds two pairs of standard 15 mm rods
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$88.95
Lanparte Locking ARRI Rosette Extension Spacer
Extends DSLR Handgrips from Camera Rig, Locking Design
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Lanparte Shoulder Support for DSLR Camera Rig
15mm LWS Compatible, Arced Shoulder Pad, Offset Bracket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$339.00
Lanparte LANC Start / Stop Controller for Blackmagic Cameras
LANC Start / Stop Controller for select Blackmagic Cameras
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Lanparte Dual Rod Clamp with Rosettes
15mm Rod Compatible, ARRI Standard Rosette Adapters
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Lanparte Top Handle for 15mm Rods
Dual 15mm Rod clamp, Non-Slip Silica-Gel Grip
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Lanparte FW-50 D-Tap Dummy Battery Pack
Compatible with Sony A7, NEX-5, 5R, 5T, 5TL, a5100, a5000 and a600 Cameras
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
LanParte E6 D-Tap Dummy Battery Pack
Compatible with Canon EOS 5D2, 5D3, 5D4, 5DSR, 60D, 70D, 80D, 6D, 6D2, 7D, 7D2.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Lanparte Basic Cage for the Blackmagic Studio Camera
Compact cage with 15mm rods designed for the Blackmagic Studio Camera
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$989.00
Lanparte BMPCC4K-C Camera Cage for Blackmagic 4K Pocket Cinema Camera
With SSD-T5 Holder, Guide pins to protect camera from twisting, Offset screw for Ronin-S gimbal, Multi cables can use at the same time with cage
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Lanparte QRP-03 Quick Release Plate
With Manfrotto 501, Made of black anodized aluminum, Built-in bubble level, Safety trigger locks the plate
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$289.00
Lanparte Gimbal camera house For GoPro Session
For use with the Lanparte LA3D Gimbal system
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$32.95
Lanparte Rod Extension Screw (Single)
Enable you to lengthen your rig track
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$19.95
Lanparte BP-02C Bridge Plate With Manfrotto 501 Plate
Compatible with industry standard 15mm Rods 60mm distance rails system, Adjustable height, Adjustable quick release plate
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$529.00
Lanparte Rod Clamp with Hot Shoe Mount
Hot shoe mount connects to camera, Made by CNC machine
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$63.95
Lanparte Extension Arm for the URSA Mini
Designed for the URSA Mini Handgrip, Built-In LANC Cable
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$339.00
Lanparte Shotgun Microphone Clamp for LA3D Series Handheld Gimbal
Available to order today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$42.95
Lanparte ARRI LMB Lens Clamp Adapter (110mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 110mm Front Lens Diameter
- Aluminium Construction
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Lanparte ARRI LMB Lens Clamp Adapter (95 mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 95mm Front Lens Diameter
- Aluminium Construction
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
Lanparte FANS Series Cage Kit for Sony a7 Series
- Dedicated Cage with Camera Adapter Plate
- 20.3 cm ARRI-Standard Dovetail Plate
- Fits ARRI-Standard 19mm Bridgeplates
- Baseplate with 15mm LWS Rod Support
- Dual 30.5 cm, 15mm Rods
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$995.00
Lanparte Stainless Steel Counter Weight
0.8kg counterbalance weight, compatible with 15mm rod systems
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Lanparte Gear Ring with Pin-Lock Tightening Mechanism for Follow Focus
- Works with any prime/zoom lens
- Rubber material
- Pitch of 0.8
- Maximum lens diameter of 10.5 cm
- Length 33.0 cm approx.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Lanparte MVLP-01 Monopod V-Lock Quick Release Plate
Standard Sony V-lock, Rotatable V-lock plate, Monopod & Shoulder support mode, Quick release design
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Lanparte EVA1K-01 Basic Handle Kit for Panasonic AU-EVA1 Camera
Extension arm for original hand grip, Top cheese plate fit for EVA1 camera, Monitor extension arm for extend and reposition monitor
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,099.00
Lanparte BMPCC4K-C Half Cage for Blackmagic 4K Pocket Cinema Camera
With Samsung SSD-T5 Holder, Guide pins to protect camera from twisting, Offset screw for Ronin-S gimbal
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$469.00
Lanparte URSA Mini Basic Shoulder Kit
Multiple 1/4"-20 and 3/8"-16 mounts for easy accessory mounting
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,569.00
Lanparte EVF Extension Arm for Sony PXW-FS5
Rotatable Design, 4" Sliding Extension Range, Tool-Free Installation
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Lanparte Right Angle 15mm Rod Clamp
Mount Rods Perpendicularly, Dual Rod Clamps, Versatile Rig Building
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$83.95
Lanparte Speed Crank for Follow Focus
Enables faster focus pulling
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Lanparte Extendable 15mm Aluminum Rod (Pair, 11.8")
High-precision rods that can be attached to a second pair of rods
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$68.95
Lanparte MA1-13 Heavy Duty Magic Arm 33cm
Friction Resistance design, Hard-wearing connection ball, 1/4" and 3/8" at two end, Payload 6 kg, Alloy hard-wearing knob
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$239.00
Lanparte Bridgeplate Screw (3/8"-16)
Standard 3/8"-16 Screw
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$12.95
Lanparte GoPro Clamp for Handheld Gimbal
GoPro clamp for the HHG-01 Gimbal system
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$64.95
Lanparte DC-35135B Dummy Battery DC Cable
Compatible with Lanparte Dummy Battery Pack E8P-01, E6P-01, LP-E17, FW-50P, EL15P-01, BLF19P-01
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte MA1-10 Magic Arm 25.4cm
Heavy payload up to 4kg, Friction resistant, 1/4-20 standard thread on both sides
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Lanparte CC-01 15mm Single Mount Cable Clamp
Compact rod mount made of rugged, anodised aluminium
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$44.95
Lanparte Carbon Fibre 15mm Rods (Pair, 9.8")
For 15mm LWS Rigs & Accessory Mounting, Rigid and Lightweight
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Lanparte BLF19P-D D-tap Fixed Voltage Battery Pack
For Panasonic GH4, GH5 and GHS, Power camera with external power supply, With same shape and interface as original battery
Usually ships in 2 - 3 weeks
You Pay:
$189.00
Lanparte Offset Clamp
Offsets Shoulder Mount from the Rig, 15mm LWS Compatible
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte Carbon Fiber 15mm Rods (Pair, 11.8")
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte Follow Focus V2 with Hard Stops for 15mm Rods
Allows you to smoothly pull focus with cinema and DSLR lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$919.00
Lanparte Carbon Fiber 15mm Rods (Pair, 350mm)
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Lanparte LP-E17 Battery Dummy for Canon 760D/750D/M3 Cameras
For Canon 760D/750D/M3 DSLRs, Enables the Use of V-Mount Batteries
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$85.95
Lanparte Lens Support for 15mm Rods
- Standard 15mm LWS rod system
- Snap-on Quick release design
- All the parts are made by precesion CNC machine
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Lanparte Chest Pad
Designed for comfortable shooting while holding your camera rig stable
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Lanparte Double Handle DSLR Camera Rig Kit
15mm-Rod Shoulder-Mount Rig for DSLRs, Quick-Release Baseplate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,419.00
Lanparte Professional DSLR Kit V1
15mm Rod Shoulder-Mount Rig, Height Adjustable Bridge Plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,999.00
Lanparte DC Power Cable for Sony FS5 Cinema Camera
Powers Sony PXW-FS5 via V-Mount Battery
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte Follow Focus Whip Crank 350mm
350mm Long, ARRI Standard Compatiblity, Rubberized Metal Focus Knob
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Lanparte Canon C300/C100 DC Power Cable for Battery Pinch
Supplies power to a Canon C300 or C100 Cinema Camera
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$34.95
You Pay:
$23.95
Lanparte GH5K-02 GH5 Camera Kit
Compatible with Panasonic GH3, GH4, GH5 Cameras, Modular design for different shooting scene, Arca Swiss camera quick release design
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,349.00
Lanparte Carbon Fiber 15mm Rods (Pair, 17.7")
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte MB-02 4 x 5.65" Rod-Mounted Swing-Away Matte Box for 15mm Rods
Fits Lenses up to 150mm O.D., Carbon Fiber Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,619.00
Lanparte D-Tap Power Cable for Blackmagic Pocket Camera
D-Tap to 2.5mm Right-Angle DC Connector, 24" Long
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Lanparte 15mm to 19mm Rod Converter for FF-02
Use 15mm-Based FF-02 on 19mm Rods, For Lanparte FF-02 Follow Focus
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte D-Tap to LEMO Power Cable for Canon C300 Mark II
For the Canon C300 Mark II, D-Tap Connector, 24" 4-Pin LEMO Cable
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Lanparte Carbon Fiber 15mm Rods (Pair, 7.9")
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Lanparte Starter DSLR Camera Rig Kit
15mm Rod Shoulder-Mount Rig for DSLRs, Height Adjustable Bridge Plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,719.00
Lanparte Magic-Arm Rod Clamp
15mm LWS Compatible, 3/8"-16 Threaded Hole, 11 lb Maximum Capacity
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Lanparte Extendable 15mm Aluminum Rod (Pair, 3.9")
High-precision rods that can be attached to a second pair of rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$59.95
Lanparte UMB-01 Universal Matte Box
Designed to transition from swing away, to clamp on, to ultralight
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,299.00
Lanparte MA1-6 Magic Arm 15.2cm
Heavy payload up to 4kg, Friction resistant, 1/4-20 standard thread on both sides
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte ARLE-02 Arri Rosette Adapter for Panasonic AU-EVA1 Grip
ARRI M6 Rosette Compatibility, Locking Design, Locking Design
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte Extension Arm for the Sony PXW-FS5
Designed for the Sony PXW-FS5 Handgrip, Built-In LANC Cable
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$319.00
Lanparte Pro Shoulder Kit for Blackmagic URSA Mini
Multiple 1/4"-20 and 3/8"-16 mounts for easy accessory mounting
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,599.00
Lanparte Basic Handle for 15mm Rod (Pair)
Enables dual handgrip support with 15mm rod support rigs
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte Extendable 15mm Aluminum Rod (Pair, 7.9")
High-precision rods that can be attached to a second pair of rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$63.95
Lanparte CA-01 C-Shaped Support Arm
Designed to be the framework for all the camera rig components
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$299.00
Lanparte MQRC-25 Ronin Monitor Quick Release Rod Clamp
Compatible with 25mm rods, Compatible with Lanparte monitor quick release mount MQR-01
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Lanparte Full-HDMI to Mini-HDMI Cable 100cm
Supports 1080p Video Transmission, Suitable for Use with HDSLR Cameras
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$38.95
Lanparte ARLE-03 Arri Rosette Adapter for Sony FS5 grip
ARRI M6 Rosette Compatibility, Locking Design, Locking Design
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte Reversing Gear for Follow Focus
Mod 0.8 reversing gear for Nikon and similar lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Lanparte 0.5 Pitch Gear Mod for FF-01 / FF-02 Follow Focus Units (70 Teeth)
Replacement 0.5 mod gear featuring 70 teeth
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte EVA1K-03 Pro Kit for Panasonic AU-EVA1 Camera
Extension arm for original hand grip, Top cheese plate fit for EVA1 camera, Monitor extension arm for extend and reposition monitor
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,699.00
Lanparte MA1-6-Q Magic Arm with Monitor Quick Release Adapter 15.2cm
Monitor quick release, Universal angle quick adjustment
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$269.00
Lanparte A7K-02 FANS Series Camera Kit for Sony A7 Series
Modular design for different shooting scene, Arca Swiss camera quick release design, Baseplate with an ARRI style dovetail, Power supply system
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,349.00
Lanparte FANS Series Camera Kit for Sony a6000 Series
Modular design for different shooting scene, Arca Swiss camera quick release design, Baseplate with an ARRI style dovetail
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$4,349.00
Lanparte V-Mount Shoulder Support V2 With Manfrotto 501 Plate
V-Mount lock on bottom of shoulder support, Quick release system with safety trigger, With Manfrotto 501 version quick release design
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$789.00
Lanparte FANS Series ARRI Standard 19mm Bridgeplate
- For ARRI Standard Dovetail Plates
- 19mm Studio Rod Support
- Quick-Release Locking Lever
- 3/8"-16, 1/4"-20 & 7mm Mounting Screws
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,049.00
Lanparte Lens Support for 19mm Rods
- Standard 19mm studio rod system
- Snap-on & quick release design
- Height adjustment
- 3/8-16 support screw to prime lens
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$379.00
Lanparte ARRI Standard Bottom Dovetail Plate (18")
- Fits All ARRI Standard Bridge Plates
- 1/4"-20 and 3/8"-16 Threads
- Stopper Screw
- Safety Latch
- Scratch Resistant
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,049.00
Lanparte Manual Friction Adjustable Zoom Controller 0.6 Mod
Manual Zoom Controller, Mounts to a Single 15mm Rod
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$499.00
Lanparte ABS Protection Case for DSLR Camera Rig Kit
Durable ABS Exterior, Watertight Seal, Custom-Cut Foam Interior
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$619.00
Lanparte E8 Battery Dummy Pack
Allows you to power your camera from an external power supply
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$75.95
Lanparte Long Focus Whip (405mm)
Designed to plug into the Lanparte Follow Focus' accessory port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$299.00
Lanparte 0.8 Pitch Gear Mod for FF-01 / FF-02 Follow Focus Units (54 Teeth)
0.8 mod gear featuring 54 teeth
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$75.95
Lanparte MA-03 Magic Arm for Select LanParte Handheld Gimbals
6" Adjustable, Articulating Arm, 1/4"-20 & Clamp Rod-Ends
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Lanparte EP-5A Battery Dummy for Select Nikon Cameras
For Nikon D3100/D3200/D3300/D5100/P7000, Accepts 7.4-8.4V Input Power
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Lanparte Tele-Lens Support V2
Secures to 15mm LWS Rigs, Height Adjustable
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Lanparte Utility Top Plate for Sony PXW-FS5
Adds Multiple Accessory Mounts, Retain Use of the Original Top Handle
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte Micro-HDMI to HDMI Cable for Blackmagic Pocket Cinema Camera Cage
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Lanparte Mini C-Arm for Matte Box (15mm)
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte GoPro HERO5 Session Clamp for LA3D-S & LA3D-S2 Handheld Gimbals
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$33.95
Lanparte Action Camera Clamp for LA3D & LA3D-2 Handheld Gimbals
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Lanparte 0.8 MOD 43 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Standard Cine Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.8 MOD 36 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Standard Cine Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.7 MOD 49 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive 0.7 MOD Lens Gears
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.6 MOD 58 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Compatible Fujinon ENG Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Lanparte Extension Arm for Follow Focus
Increases height of follow focus, Adjustable gear angle, CNC machined
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Lanparte D-Tap Male to Female 1:4 Cable Splitter Hub
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$83.95
Lanparte ABS Protection Suitcase for DSLR Camera Rig Kit
Durable ABS Exterior, Watertight Seal, Top Handle
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$349.00
Lanparte Shoulder-Mount Combo Rig Kit with ABS Protection Case
15mm-Rod Shoulder-Mount Rig, Height Adjustable Bridge Plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$2,799.00
Lanparte GoPro HERO5 Clamp for LA3D-S & LA3D-S2 Handheld Gimbals
- For LA3D-S & LA3D-S2 Handheld Gimbals
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$59.95
Lanparte 19mm to 15mm Rod Converter for FF-02
- Use 19mm-Based FF-02 on 15mm Rods
- For LanParte FF-02 Follow Focus
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte 19mm Studio Support Rod (8", Pair)
- Pair of 200mm, 19mm Support Rods
- Lightweight steel construction
- Designed to reduce your rig's weight
- Chamfered at each end
- Compatible with all the 3rd party 19mm studio bridge plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Lanparte 19mm Studio Support Rod (12", Pair)
- Pair of 300mm, 19mm Support Rods
- Lightweight steel construction
- Designed to reduce your rig's weight
- Chamfered at each end
- Compatible with all the 3rd party 19mm studio bridge plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Lanparte 19mm Studio Support Rod (18", Pair)
- Pair of 440mm, 19mm Support Rods
- Lightweight steel construction
- Designed to reduce your rig's weight
- Chamfered at each end
- Compatible with all the 3rd party 19mm studio bridge plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte ARRI LMB Lens Clamp Adapter (100mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 100mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Lanparte ARRI LMB Lens Clamp Adapter (114 mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 114mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Lanparte ARRI LMB Lens Clamp Adapter (134mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 134mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Lanparte ARRI LMB Lens Clamp Adapter (136mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 136mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$279.00
Lanparte ARRI LMB Lens Clamp Adapter (80mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 80mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Lanparte ARRI LMB Lens Clamp Adapter (87 mm)
- For ARRI LMB-5, LMB-15, LMB-25, LMB-4x5
- Secures to 87mm Front Lens Diameter
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Lanparte FANS Series Cage Kit for Panasonic GH5
- Dedicated Cage with Camera Adapter Plate
- 20 cm ARRI-Standard Dovetail Plate
- Fits ARRI-Standard 19mm Bridgeplates
- Baseplate with 15mm LWS Rod Support
- Dual 30 cm, 15mm Rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$995.00
Lanparte ARRI Standard Bottom Dovetail Plate (12")
- Fits All ARRI Standard Bridge Plates
- 1/4"-20 and 3/8"-16 Threads
- Stopper Screw
- Safety Latch
- Scratch Resistant
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$839.00
Lanparte FANS Series Cage Kit for Sony a6000 Series
- Dedicated Cage with Camera Adapter Plate
- 20.3 cm ARRI-Standard Dovetail Plate
- Fits ARRI-Standard 19mm Bridgeplates
- Baseplate with 15mm LWS Rod Support
- Dual 30.5 cm, 15mm Rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$995.00
Lanparte Single Handle for 15mm Rods
For Single-Handed Shoulder Rig Support, Dual 15mm Rod Clamp
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte Universal Grip V2 for 19mm Rods
For 15mm LWS & 19mm Studio Rods, Steel Spindle Joint Locking System
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$839.00
Lanparte Bottom Dove-Tail Plate 200mm for 15mm
Baseplate quick release button, Compatible with O'connor tripod, Scratch resistant, ARRI Standard
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Lanparte ABP-04 Gold Mount Battery Pinch for URSA Mini
Battery-Charging Input, USB Charging Port for Mobile Devices, Multiple DC Power Outputs
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$619.00
Lanparte UMB-Pro Universal Matte Box
- 15mm LWS Rod-Mount System
- Three Filter Stages (Fixed/Rotating)
- Supports 4x5.65, 4x4, 109-112mm Filters
- Rotating Adjustable Filter Holder
- 95mm and 87mm Lens Clamp Adapters
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,569.00
Lanparte-Fans GH5 camera kit
- Dedicated Cage with Camera Adapter Plate
- NATO Rail Top Handle
- 1/4"-20 Accessory Adapter
- Shoe Mount
- 15mm Rod Port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$599.00
LanParte FANS Series Camera Shoulder Rig
- Supports ARRI-Standard 19mm Bridgeplates
- Rosette-Adjustable Handgrips
- Forward/Backward-Adjustable Shoulder Pad
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,299.00
Lanparte FANS Series Cage for Sony a7 Series
- Dedicated Cage with Camera Adapter Plate
- NATO Rail Top Handle
- 1/4"-20 Accessory Adapter
- Shoe Mount
- 15mm Rod Port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$599.00
Lanparte FANS Series Cage for Sony a6000 Series
- Dedicated Cage with Camera Adapter Plate
- NATO Rail Top Handle
- 1/4"-20 Accessory Adapter
- Shoe Mount
- 15mm Rod Port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$599.00