Lenkeng HDMI Wireless Matrix Extender has been discontinued, here are some related products you might like:
Lenkeng HDMI Wireless Matrix Extender
This product is no longer available
Overview
Allows to transmit and extend HDMI signal up to 50 meters away wirelessly.
Description
This Lenkeng HDMI Wireless Matrix Extender includes transmitter and receiver units, which allows you to transmit and extend HDMI signal for up to 50m wirelessly. It has a strong anti-interference ability running at 5GHz. This wireless extender not only supports point to point configuration but also supports one to many (1 to 2) and many to many (2 to 2, 2 to 1) configuration. This extender supports a wide range of IR passback frequency 20-60KHz. This is a very good solution for transmitting one or more HDMI source signals to one or more screens over a long distance without running wires.
Features
- Smart portable design
- Highest resolution up to 1080p full HD.
- Strong anti-interference ability running at a 5GHz operational frequency.
- Support point to point configuration, one to many (1 to 2) and many to many (2 to 2, 2 to 1) configuration.
- Support IR passback with 20-60KHz frequency.
- Supports button control to set channels and IR controller to switch and choose input sources from receiver side.
- 50m long-range transmission distance.
Connection
- Point to Point connection
- One to two connection
- Matrix connections
Connection instruction
- Connect HDMI input with HDMI source device and connect IR blaster extension cable with IR OUT interface of the sender (TX).
- Connect HDMI output to HDMI display device and connect IR receiver extension cable with IR IN interface.
- Power on the device (power led lights) and it works.
Note:
- Transmission distance will be different due to the environment.
- Wall, brick or glass will shorten the signal cover range or cause big signal loss.
- It is recommended that the distance between each unit should be more than 5 meters.
Specifications
Voltage/Current | DC5V/2A |
Power consumption | TX<7W Rx<5W |
HDMI compliance | HDMI1.3 |
HDCP compliance | HDCP1.2 |
HDMI resolution supported | 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz |
Supports audio formats | L/R stereo audio |
Maximum transfer rate | 10.2Gbps |
Audio signal transmission format | L/R stereo audio |
Input and output TMDS signal | 0.5~1.5Vp-p (TMDS) |
Input and output DDC signal | 5Vp-p (TTL) |
Input cable length supported | ≤5m (AWG26 HDMI1.3cable standard) |
Output cable length supported | ≤5m (AWG26 HDMI1.3cable standard) |
IR remote control | Support IR passback with 20-60KHz frequency |
Transmission method | 5.8G Wireless transmission |
Transmission distance | 50m |
Latency | ≤200ms |
Electrostatic protection of the whole machine | 1a Contact discharge level 3 1b Air discharge level 3 Standard: IEC61000-4-2 |
Working temperature | 0℃~50℃ |
Storage temperature | -10℃~70℃ |
Humidity (no condensation) | 0% ~90% |
Dimension | 95(W) x 120.58(D) x 20.1(H)mm |
Material | Iron alloy material + crystal panel |
Processing technology | Sandblasting |
Colour | black |
Weight | TX: 200g,RX: 200g |
Mean time between failures (MTBF) | >30000 Hours |
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Lenkeng HDMI Wireless Matrix Extender
- Manufacturer: Lenkeng
- Model: LKV388M
- SKU: LKV388M
- RM Product #: 55358
- Warranty: 2 year manufacturer warranty