Clamps & Clips
Matthews Grid Clamp with Grip Head (2.5")
- Double Hand Wheels, no Tools Required
Usually ships in 6 - 8 weeks
You Pay:
$319.00
Kupo KS-281 Coupler Clip Set for 25-30mm Diameters
- Combination Snap Clip & Tube Mounting Coupler
- Set of Two
Usually ships in 8 - 12 weeks
You Pay:
$309.00
Matthews Quacker Clamp
- AKA - Duck Bill or Platypus Clamp
- For Positioning Foam Core, Reflector or Bead Board
Usually ships in 6 - 8 weeks
You Pay:
$279.00
Matthews C - Clamp with 2- 5/8" Baby Pins - 6"
- 2 Separate 5/8" Diameter Pins
- Clamp Jaw Offers a Maximum 6" Opening
- Allows Light Fixtures to Fit with Minimal Clearance
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Kupo KS-282 Frog Locking Carabiner Coupler Set for 25-30mm Diameters
- Combination Frog Carabiner & Tube Mounting Coupler
- Set of Two
Usually ships in 8 - 12 weeks
You Pay:
$259.00
Inovativ Offset Baby Pin Mount
- Offset baby pin system
- Attaches to rods via Convi/Mafer clamp
- Supports up to 20kgs
- Add Baby Pin to AXIS or Grip Stand
- Compatible with Baby Pin Accessories
Contact us for an ETA
You Pay:
$239.00
Manfrotto Column Clamp (349)
- Accepts 190 & 055 Series Columns
- Replaces #3424
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$229.00
Manfrotto 175F-2 Cold Shoe Clamp
- Cold Shoe Mount, Centre Ball Head
- Rubber Grips Prevent Scratches, 5/8" Pin
- Load Capacity: 2kg, 5/8" Receiver
- Ball Head Offers Precise Positioning
Usually ships in 2 - 3 weeks
You Pay:
$229.00
You Pay:
$219.00
Lupo V-Mount Clamp
V-Mount Clamp that allows you to attach a V-Mount battery to a rail, tripod leg, table and other objects.
Usually ships in 3 - 4 weeks
You Pay:
$219.00
Matthews The Claw Rigging Clamp for Tube Lights
- Textured rubber to grip without surface damage.
- Lightweight with black finish
- Low-profile 5/8” pin mounts
- Magnets keep claw fingers open when mounting
Usually ships in 6 - 8 weeks
You Pay:
$219.00
You Pay:
$199.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Wooden Camera 19mm Tube Clamp with Center Screw Channel
Allows attaching to holes between 25mm and 36mm apart center to center.
Usually ships in 3 - 4 weeks
You Pay:
$189.00
Manfrotto 123 Pivoting Boom Clamp for Super & Heavy Duty Boom
- Pivoting clamps
- For super/heavy duty booms
- Use with 35 mm diameter boom shafts
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Avenger C339 Grab Clamp
Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
In stock
Ships tomorrow
$359.00
You Pay:
$188.00
$359.00
Kupo KCP-601-L Super Viser Clamp (End Jaw, 17.5")
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Manfrotto 038 Double Super Clamp
Set of two super clamps fastened together at fixed right angles.
Usually ships in 2 - 3 weeks
You Pay:
$179.00
Kupo KCP-440 4.5" Centre Grip Head with 28mm Pin
- 2 Rotating Discs Attached to 1-1/8" Pin
- 5/8" and 3/8" V-Jaws
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo FH30 Quick Reverse Ear for 30mm Square Tube
T-slotted ear designed for dropping in to grip head, black powder coating steel, safety T-slotted ear designed to avoid unexpected drop-off
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Inovativ AXIS Weight Hanger
- Keep Your Grip Stand Stable
- Compatible with AXIS or American Stands
- Steel Construction with Foam Core
- Hook for Weight Bag
Contact us for an ETA
You Pay:
$169.00
Kupo KCP-817 Quick Action Jr. Pipe Clamp (22-53mm)
- Quick-Action Locking Device
- Clamp Any Pipe
- Heavy-Duty Gravity Casting
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Padcaster Superclamp
Designed to Hold Accessories, Attaches to Padcaster Frame, Adjustable up to 180 Degrees, Pre-Assembled Ball Head, Integrated 1/4"-20 Stud
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Lupo Fixture Clamp for Tubes up to 55mm
- 14.97 kg Load Capacity
- Includes Reversible 5/8" Spigot
- Die-Cast Aluminium Construction
Usually ships in 3 - 4 weeks
You Pay:
$149.00
Kupo KCP-230 Grip Head with Swivel Pin
- 5/8" Swivel Pin
- 5/8" and 1-1/8" Combo Receiver
- Oversized T-Handle
- V-Jaws with Special Tooth Design
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Impact CC-128 Double Super Clamp
- Aluminium Construction
- Grips up to 55mm Diameter Poles
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Matthews Baby Pipe Clamp with 5/8" Pin
- 5/8" pin for mounting
- Safety chain and pin
Usually ships in 6 - 8 weeks
You Pay:
$139.00
You Pay:
$139.00
9.SOLUTIONS Heavy Duty Python Clamp with Stud
- Load Capacity: 20 kg
- Clamping Range: 0 to 1.96"
- Tightening Knob
- 5/8" Baby Pin Stud
- 3/8"-16 (M10) Female Connection
Usually ships in 4 - 6 weeks
You Pay:
$139.00
Impact Pipe Clamp with Baby Pin
5/8" Pin, Aluminium Construction, 100 kg Load Capacity
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Manfrotto 635 Quick Action Clamp
Has the ability to quickly release its jaws without loosening the lock
Special Order
Contact us for an ETA
You Pay:
$129.00
Manfrotto 043 Sky Hook Gaffer Clamp
- Replaces #2970
- Lightweight
- Adjustable jaws
Special Order
Contact us for an ETA
You Pay:
$129.00
Kondor Blue Cine Magic Arm Centre Clamp (Black)
- Aluminium Construction
- Compatible with Two 1" Ball Heads
- Large Thumb Knob
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Kupo KCP-252 Mounting Coupler (25mm)
- Fits Tube with 0.98" Diameter
- Integrated Cold Shoe
- For 1/4"-20 & 3/8"-16 Accessory Mounting
- Lightweight Aluminium
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Impact Hex Stud Grip Head with Super Clamp
- 2.5" Hex Stud Grip Head
- Super Clamp with Ratchet Handle
- Aluminium Alloy Construction
- Integrated Hex Stud
- 5/8, 3/8, 1/8, and 1/16" Holes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Manfrotto Nano Clamp
- Load Capacity 4kg
- 1/4"-20 & 3/8"-16 Female Threads
- Clamping Range of 1.3cm - 3.5cm
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Kupo KS-280 Press Snap Clip with 1/4"-20 Thread
- Black Anodised Aluminium Alloy
- Opening Diameter of 25mm
Usually ships in 8 - 12 weeks
You Pay:
$119.00
9.SOLUTIONS Savior Clamp with 5/8" Socket
- Load Capacity: 29.9 kg
- Weighs 0.49 kg
- 6.6 cm Jaw Opening
Usually ships in 4 - 6 weeks
You Pay:
$119.00
9.SOLUTIONS Python Double Clamp
- Load Capacity: 20 kg
- Jaws Open from 0 to 50 mm
- Two clamps
- Dual contoured jaws
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Aputure Lightning Clamp
- Stand Clamp with Quick Release System
- Includes Quick Release Plate
- Ratchet Handle
Usually ships in 4 - 6 weeks
You Pay:
$114.00
Kupo KCP-100B Junior C-Clamp with Tommy Bar
- Hang Lights in TV Studios and Theatres
- Pass-Through Pin
- Fitted with Safety Cable
- Fits Tubes 2.2 to 5.4cm in Diameter
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kondor Blue Cine Magic Arm Centre Clamp (Space Grey)
- Aluminium Construction
- Compatible with Two 1" Ball Heads
- Large Thumb Knob
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
9.SOLUTIONS Savior Clamp with 5/8" Stud
- Load Capacity: 29.9 kg
- Weighs 0.45 kg
- 5.9 cm Jaw Opening
In stock
Ships tomorrow
You Pay:
$109.00
9.SOLUTIONS Python Clamp with Snap-In Socket
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Receiver
- 3/8"-16 (M10) Connection
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00