Studs, Receptors & Pins
Impact 5/8" Snap-in Pin for Super Clamps (Black)
Used to connect a lighting fixture to a Super Clamp
In stock
Ships tomorrow
$16.95
You Pay:
$12.95
$16.95
Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)
- For Super Clamp System
- Replaces #2907
In stock
Ships tomorrow
You Pay:
$18.95
Nanlite PavoTube II 6C Coupler
- 1/4 20" Male to Male Adapter
- Mount Multiple PavoTube II 6C's Together
In stock with supplier
Usually ships in 2 - 3 working days
$9.95
You Pay:
$8.00
$9.95
Manfrotto 013 Adapter Spigot
A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock
Ships tomorrow
You Pay:
$27.95
Manfrotto 026 Swivel Adapter
An adapter with the ability to rotate - supports up to 2.5kg
In stock
Ships tomorrow
You Pay:
$89.99
Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread
- Allows Stand Mounting
- Spring-Loaded Locking Knob
In stock
Ships tomorrow
You Pay:
$16.95
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female
- Converts 1/4"-20 Stud to 5/8" Baby Stud
In stock
Ships tomorrow
You Pay:
$8.95
Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver
- Eight Anchor Points
- Metal Locking Knob
- Chrome-Plated Steel Finish
In stock
Ships tomorrow
You Pay:
$39.95
Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads
- Double-Sided Stud
- Fits into Any 5/8" Receiver
In stock
Ships tomorrow
You Pay:
$10.95
Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
Mounts Lights / Accessories on C-Stands
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$78.95
Impact CA-106 Junior to Baby Pin Adapter
1 1/8" (28 mm) and 5/8" (16 mm) spigots
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$46.95
9.SOLUTIONS Baby Pin Set
Increase mounting utility to anything with a 3/8" thread
In stock
Ships tomorrow
You Pay:
$52.95
Impact SRP-113 Long Double Stud 5/8"
Ideal for use with super clamp or other grip and mounting accessories
Estimated stock due 24th of April
You Pay:
$17.95
Impact Scissor Mount for Drop Ceilings
Enables attachment of small lights and accessories to the grid
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$29.95
Impact Baby Triple Header
- Five Welded Steel Baby Pins
- 5/8" Receiver
- Chrome-Plated Steel Construction
- Multiple Mounting Options
- Combo 1-1/8" Pin / 5/8" Receiver
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Kupo KCP-241 40" Hex Grip Arm with Big Handle (Silver)
- Baby Hex Pin Connection
- Non-Slip Surface
Usually ships in 8 - 12 weeks
$93.00
You Pay:
$67.95
$93.00
Impact CA-111 5/8" Male to 1/4"-20 Male Screw Adapter
Allows you to mount an accessory onto a 5/8" female stand
Estimated stock due 24th of April
You Pay:
$12.95
Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads
Features both 1/4"-20 and 3/8" male thread sizes
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$25.95
Impact Standard Stud for Super Clamp with 3/8" Male Threads
Used to mount cameras and other accessories onto the Super Clamp
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$13.95
Manfrotto 119 Adapter Spigot
Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$13.95
Impact Pipe Clamp with Baby Pin
5/8" Pin, Aluminium Construction, 100 kg Load Capacity
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships tomorrow
You Pay:
$499.00
Impact 3" Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$39.95
Manfrotto 118 Spigot with Double Male Thread
A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$15.95
Impact Double Ball Joint Head
A handy accessory for mounting lights or other gear
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$80.95
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Kondor Blue 5/8" Baby Pin Spigot Receiver to NATO Clamp Adapter (Raven Black)
- NATO Clamp
- Mounts on Light Stands and C-Stands
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Impact 6"/15cm Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$41.95
Impact Wall Plate with 5/8" Locking Receiver
- Accepts 5/8" Diameter Pin.
- Chrome-Plated Steel Construction.
- 8 Anchor Points.
- Hole for Safety Cable.
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$58.95
Manfrotto 203 Extension Arm for Mini Clamp
- Requires Mini Clamp
- Extends 12 cm
- 1/4"-20 and a 3/8" screw thread
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Manfrotto 133B Joining Arm for Super Clamps, Black - 6.5"
- Joins two super clamps
- Hexagonal ends
- Lock the clamps together at different angles
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$38.95
Manfrotto 066 Double Female Stud for Super Clamp
- Double ended stud
- 1.6 cm diameter stud
- Extend an existing threaded stud
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$21.95
Impact 5/8" Receiver to 5/8" Pin Adapter
- Aluminium Female to Male Adapter
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$36.95
Manfrotto 061 Joining Stud for Super Clamp
- Compatible with Super Clamps
- Steel
- Reliable
- 5 cm in height
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$21.95
Impact Short Double Female Stud for Super Clamps with 1/4"-20 & 3/8" Threads
Used with a Super Clamp or to extend an existing threaded stud
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$9.95
Impact 1/4"-20 Threaded 3/8" Stud for Stand Top
Allows portable background crossbar to be used with the stand
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$24.95
Impact Collapsible Reflector Holder
Holds 60" Round Collapsible Reflector, Light and Compact
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$44.95
Impact Heavy Duty Swivel Pin
Adds articulation to your stand or boom
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$94.95
Impact 5/8" Receptor to Long 3/8" Diameter Stud
Converts studs for fixtures that accept nothing larger than 3/8"
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$25.95
Impact Short Double Male Stud for Super Clamps with 1/4"-20 & 3/8" Threads
Can be used with Super Clamps, Varipoles, light stands, boompoles etc.
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$12.95
Manfrotto 036-14 Lighting Stud
Features a 1/4 inch screw - ideal when mounting cameras directly
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$27.95
Impact Standard Stud for Super Clamp with 1/4"-20 Male Threads
Mounts cameras and other accessories directly onto the Super Clamp
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$12.95
Impact Baby Drop Down Pin
Helps to maintain a constant downward angle of a mounted light fixture
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$84.95
Manfrotto 186 Female Threaded 3/8" to Male 5/8" Stud Adapter - 50mm Long
- 50 mm long
- 3/8'' on the lower end
- 5/8'' stud at the top
- 5 cm in height
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$36.95
Manfrotto 153 Mole Richardson Baby Adapter - 5/8-5/8"
- Replaces #3106
- Secure mounting of Mole Richardson Baby series fixture
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$49.95
Kondor Blue 5/8" Baby Pin Spigot Receiver to NATO Clamp Adapter (Space Gray)
- NATO Clamp
- Mounts on Light Stands and C-Stands
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Avenger E200 Stand Adapter
Zinc-plated Steel Construction, Junior to Baby: 1 1/8" to 5/8"
In Stock
Usually ships in 2 - 3 working days
You Pay:
$82.95
Impact Double Ball Joint Head with Super Clamp and Camera Platform Kit
3 piece kit to support cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$169.00
Impact Double Ball Joint Head with Camera Platform Kit
2 piece kit that supports cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$119.00
Impact Joining Stud for 2 Super Clamps
Double hex head pin that joins 2 Super Clamps together
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$12.95
Manfrotto 174 Snap-In Pin for Super Clamp System
- Metric 10 Screw
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$21.95
Manfrotto 061RA Right Angle Joining Stud for Super Clamp
- Joins two super clamps together
- Useful for making frames
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$21.95
Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)
- Aluminium & Steel
- Four V-Shaped Jaws
- Handle With Roller Bearings
- Non-Slip Aluminium Friction Disc
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo KS-046 Baby 3" Wall Plate, Baby 5/8" Stud
- Eight Anchor Points
- Chrome-Plated Steel Finish
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KCP-240 40" Grip Arm With Big Handle (Silver Machined Finish)
- Rough Non-Slip Surface
- Aluminium & Steel
Usually ships in 8 - 12 weeks
You Pay:
$68.95
Kupo KCP-200 2-1/2" Grip Head With Big Handle (Chrome-Plated Finish)
- Aluminium & Steel
- Four V-Shaped Jaws
- Handle With Roller Bearings
- Non-Slip Aluminium Friction Disc
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Avenger D200 2.5" Grip Head (Black)
Aluminum Construction, 5/8" Stand Mount
Special Order
Contact us for an ETA
You Pay:
$129.00
Kupo KCP-101 Max Arm
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
Usually ships in 8 - 12 weeks
You Pay:
$139.00
You Pay:
$12.95
Kupo KCP-616 Duck Bill Clamp
- For Holding Bead Board, Foamcore, Etc.
- Clamps Onto Flat Surfaces Like Tabletops
- 5/8" Baby Pin
- Adjustable Vice Grip
- Also Known as Platypus Clamp
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KCP-450 4-1/2" Grip Head With 1-1/8" Stud and Receiver
- Supports 5/8" and 3/8" Accessories
- Holds Large Overhead Frames
- Two Rotating Discs with V-Shaped Jaws
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KS-200 Stand Adapter, Junior 1-1/8" Stud to Baby 5/8" Stud
- 5/8" receiver to 1-1/8" receiver
Usually ships in 8 - 12 weeks
You Pay:
$29.95
Kupo KS-084 Quick Release Adapter (1/4"-20)
- 1/4"-20 Male to Male Adapter
- Spring-Loaded Ball Bearing Mechanism
- Accepts Four Different Top Mounts
Usually ships in 8 - 12 weeks
You Pay:
$28.95
Kupo KS-097 Baby Ball Head Adapter
- Mount Tripod Head to Light Stand
- 1.7" Diameter Base with 3/8"-16 Screw
- Three Set Screws to Lock Down Head
- Interior Receptacle: 5/8"
- Exterior Diameter: 1-1/8"
Usually ships in 8 - 12 weeks
You Pay:
$45.95
Kupo KCP-411 Off-Set Female Baby Mounting Adapter - Kino Adapter
- Adds Stability
Usually ships in 8 - 12 weeks
You Pay:
$61.95
Phottix Double Ended Spigot with 1/4" and 3/8" Male Threads
- Comes with 1/4"-20 and 3/8" male threads
- Serves as a replacement part for compatible lighting equipment.
Usually ships in 2 - 3 weeks
You Pay:
$24.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
You Pay:
$30.95
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
You Pay:
$53.95
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Kupo KS-031 Snap-In Right-Angle Pin
- Baby Pin on One End, Hex Pin on Other
- For Convi & Super Viser Clamp Systems
- Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$34.95
You Pay:
$10.95
Kupo KS-092 Baby 5/8" Stud, 2.5" Long for 3 & 4-Way Clamp
- Notch Slides into Mounting Location
- Locking Collar
Usually ships in 8 - 12 weeks
You Pay:
$15.95
You Pay:
$26.95
amaran Baby Pin Adapter to 3/8"-16 Screw
- Compatible with amaran T2C/T4C
- For Use with C-Stand or Grip Arm
Usually ships in 4 - 6 weeks
You Pay:
$55.95
Kupo KS-426 Super Knuckle Ball with 3/8"-16 Screw and Locating Pins
- Can Be Mounted on Cage or Handle
- Equipment Doesn't Rotate after Mounting
- Quick Locking Thumbscrew, CNC Aluminium
- Part of Super Knuckle System
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Chauvet CTC-50HCN Narrow Half Coupler
1,650 lb Load Capacity, Aluminum Alloy Construction
Usually ships in 2 - 3 weeks
You Pay:
$45.95
Kupo KS-024 1/4"-20 Threaded Mounting Plate
- Mounts Accessories to Convi Clamp
Usually ships in 8 - 12 weeks
You Pay:
$25.95
Manfrotto 264 Rounded Lighting Stud
- 5/8" male stud
- Locking wingnut
- Use it in a yoke mount
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-014 Hex Stud 3/8"-16 M & 1/4"-20 M
- For Kupo Convi Clamp System
- Double-Sided Hex Stud
Usually ships in 8 - 12 weeks
You Pay:
$6.95
Kupo KS-016 Double Sided Joining Stud with 90/45 Degree Offset
- Steel Construction
- Rotates in 45 Degree Increments
- Double Hex Head
Usually ships in 8 - 12 weeks
You Pay:
$10.95
Kupo KS-015R Round Stud with 3/8"-16 and 1/4"-20 Female Thread
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$5.95
Kupo KS-079 Baby 5/8" Receiver to Stud Adapter for Elinchrom Heads
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$31.95
You Pay:
$31.95
You Pay:
$37.95
Kupo KS-008 Double Sided Hex Joining Stud
- Steel Construction
- Joins 2 Convi Clamps
Usually ships in 8 - 12 weeks
You Pay:
$9.95
Kupo KS-026 Camera Hex Stud, 1/4"-20 M
- Mounts to a Convi or Super Viser Clamp
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$7.95
Kupo KD-CM16P Baby Drop Ceiling Adapter with 5/8" Stud
- Ideal for Rigging in Office Interiors
- Removable 5/8" Baby Pin
- 1/4"-20 Male Thread
- Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$27.95
Kupo KS-078 5/8" Baby Stud with 3/8"-16 Male Thread
- Length: 4"
- Textured Non-Twist Stud End
Usually ships in 8 - 12 weeks
You Pay:
$26.95
Kupo KS-147 Baby Receiver to Cheater Baby Pin
- 5/8" Baby Receiver
- 3.2" Long Baby Pin
- For Barndoors & Beauty Dishes
- Chrome-Plated Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$43.95
Kupo KCP-610 Foamcore Fork with Baby 5/8"(16 mm) Stud
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$37.95
Matthews Hollywood Grip Head 4 1/2"
- 1-1/8" Junior Pin
- Aluminium Construction
Usually ships in 6 - 8 weeks
You Pay:
$299.00
Kupo KS-023 3/8"-16 Threaded Mounting Plate with Baby 5/8" Stud
- Mounts Accessories to Convi Clamp
Usually ships in 8 - 12 weeks
You Pay:
$25.95
Kupo KCP-173 Mini Articulated Two Section Arm (57cm)
- Two 5/8" Hex Studs
- 3/8"-16 and 1/4"-20 Female Threads
- Two Sections Provide More Articulation
- Works with Convi or Super Clamps
Usually ships in 8 - 12 weeks
You Pay:
$58.95
Kupo KS-019 Swivel Extension Arm, Hex Stud to 5/8"(16 mm) Receiver
- For Convi & Super Viser Clamps
- Double Ball Elbow Joint
- Aluminium With Steel Ball Clamps
Usually ships in 8 - 12 weeks
You Pay:
$45.95
Manfrotto 620-10 Male Adapter
Used to add a mount to the yoke of a heavy cinema light by M10 screw.
Usually ships in 2 - 3 weeks
You Pay:
$52.95
Kupo KS-058 Baby 5/8" Offset Arm (Chrome-plated)
- Chrome-plated Steel Construction
- 41cm Length
- Opposing 5/8" Baby Studs
- 5/8" Baby Receiver
Usually ships in 8 - 12 weeks
You Pay:
$49.95
Kupo KCP-310 EZ Grip Finger with Baby 5/8" Stud and Receiver
- Aluminium Construction
- 5/8" Pin, 5/8" Receiver
- 1 1/8" Base Fits into Junior Receiver
Usually ships in 8 - 12 weeks
You Pay:
$63.95
Kupo KS-090 TV to Motion Picture Adapter (TVMP)
- 5/8" Receiver
- Large Tightening Knob
Usually ships in 8 - 12 weeks
You Pay:
$18.95
Manfrotto 036-38 Lighting Stud
Features a 3/8 inch screw - ideal when mounting cameras directly
Special Order
Contact us for an ETA
You Pay:
$18.95
Avenger D200 2.5" Grip Head
Aluminium Construction, 5/8" Stand Mount, Includes T-Top
Special Order
Contact us for an ETA
You Pay:
$129.00
You Pay:
$35.95
Manfrotto 027 Light Stand Holder
Mounts to a wall and holds 8 light stands by their top studs
Special Order
Contact us for an ETA
You Pay:
$119.00
CHAUVET CLP-15N Narrow Half Coupler Clamp
Narrow design fits between cross braces with ease, Made of aluminum
Usually ships in 2 - 3 weeks
You Pay:
$34.95
Kupo KCP-806 Sidearm with Baby Pin/Receiver
- Mounts to C-Stand Riser Sections
- 5/8" Male Pin & 5/8" Female Receiver
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Kupo KCP-101W Max Arm with Hand Wheel
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
You Pay:
$26.95
Avenger D520L 40" Extension Arm (Chrome-plated)
Chrome-plated Steel and Aluminum Alloy, Permanently Attached Grip Head
Special Order
Contact us for an ETA
You Pay:
$159.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Kupo KD-735P Mini Flex Arm With Alligator Clip
- 3/8"-16 F Thread Inside 5/8" Adapter
- Alligator Clip
- Aluminium
Usually ships in 8 - 12 weeks
You Pay:
$34.95
Kupo KCP-340 Baby Plate with EZ Grip Finger
- Mount light fixtures onto flat surfaces
Usually ships in 8 - 12 weeks
You Pay:
$60.95
Manfrotto 036MR Lighting Stud
Attaches by a 5/8 in stud and a hole to insert a safety cable.
Usually ships in 2 - 3 weeks
You Pay:
$30.95
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Kupo KS-091 Baby 5/8"(16mm) Stud, 4.25"(10.8cm) Long for 3 & 4-Way Clamp
- Notch for Mounting Location
- Locking Collar
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-127 Recessed Light Socket to 5/8" Baby Pin Adapter
- 5/8" to 1-1/8" with E27 Male Threads
- Non-Conductive Nylon E27 Thread
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KCP-631 Baby Drop Down Pin
- 5/8" Female to 5/8" Male
- Most Often Used on Boom Arms
Usually ships in 8 - 12 weeks
You Pay:
$48.95
Kupo KCP-950P 4-Way Clamp for 1.4-2.0" Tube
- Mounts Around Tubing Sized 1.4-2.0"
- Four Recessed Mounting Points
- Aluminium Construction
- Supports Loads up to 30kg
Usually ships in 8 - 12 weeks
You Pay:
$59.95
SHAPE Female Spigot (3/8"-16 to 1/4"-20)
- For Support or Lighting Systems
- Compatible with Most Common Thread Sizes
- Metal Construction
Usually ships in 4 - 6 weeks
You Pay:
$19.95
Kupo KS-083 Quick Release Adapter Male Top Mount (3/8"-16)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$14.95
Kupo KS-015 Hex Stud with 3/8"-16 Female and 1/4"-20 Female Thread
- Brass Construction
- Hex Resists Twisting
Usually ships in 8 - 12 weeks
You Pay:
$5.95
Kupo KCP-930P 3-Way Clamp for 1.0-1.4" Tube
- Mounts Around Tubing Sized 1.0-1.4"
- Three Recessed Mounting Points
- Aluminium Construction
- Supports Loads up to 30kg
Usually ships in 8 - 12 weeks
You Pay:
$50.95
Kupo KCP-220 20" Grip Arm With Big Handle (Silver Machined Finish)
- Rough Non-Slip Surface
- Aluminium & Steel
Usually ships in 8 - 12 weeks
You Pay:
$55.95
Kupo KCP-260B Grip Head With Hex Stud
- 2-1/2" Grip Head
- Four V-Shaped Jaws
- Non-Slip Aluminium Friction Disc
- Attaches to Convi or Super Viser Clamp
- Aluminium & Steel Construction
- Powder Coated Finish
Usually ships in 8 - 12 weeks
You Pay:
$45.95
Kupo KS-014R Round Stud with 3/8"-16 and 1/4"-20 Male Thread
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$6.95
Avenger F810 Baby Plate with 5/8" Swivel Spigot
Chrome-plated Steel Construction, Large T-Handle, 5/8" Baby Pin
Special Order
Contact us for an ETA
You Pay:
$139.00
Kupo KCP-172 Mini Articulated One Section Arm (28cm)
- Two 5/8" Hex Studs
- 3/8"-16 and 1/4"-20 Female Threads
- Works with Convi or Super Clamps
Usually ships in 8 - 12 weeks
You Pay:
$44.95
Kupo KCP-240B 40" Grip Arm With Big Handle (Black Powder Coated Finish)
- Rough Non-Slip Surface
- Aluminium & Steel
Usually ships in 8 - 12 weeks
You Pay:
$77.95
Kupo KS-025 Camera Hex Stud, 3/8"-16 M
- Mounts into Convi or Super Viser Clamp
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$7.95
Kupo KCP-620P Petite Clamp for Baby 5/8" (16mm) Tubing
- 5/8" Receiver
- For the 3 and 4 Way Clamp System
Usually ships in 8 - 12 weeks
You Pay:
$37.95
Wire Safety Bond - 900mm Loop End
Safety cable for mounting lights to a studio grid
Usually ships in 1 - 2 weeks
You Pay:
$18.95
Avenger E250 Long Double 5/8" Baby Pin
Zinc-plated Steel Construction
Special Order
Contact us for an ETA
You Pay:
$18.95
Kupo KS-094 Solid Steel Right Angle Baby Stud for 3 and 4 Way Clamps
- To Clamp Lights to 1 - 2" Tube or Pipe
Usually ships in 8 - 12 weeks
You Pay:
$33.95
Kupo KS-044 9" Baby Plate
- Mount light fixtures onto flat surfaces
- 9" 5/8" baby pin
Usually ships in 8 - 12 weeks
You Pay:
$34.95
Kupo KCP-809 Junior 1 1/8" Side Arm (Chrome-plated)
- Chrome-plated Steel Construction
- 22.25" Length
- 1 1/8" Receiver
- 2.04" Jaw
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kupo KCP-220B 20" Grip Arm With Big Handle (Black Powder Coated Finish)
- Rough Non-Slip Surface
- Aluminium & Steel
Usually ships in 8 - 12 weeks
You Pay:
$55.95
Avenger D250 Gag Gobo Grip Head
Aluminum Alloy Construction, Double Grip Head
Special Order
Contact us for an ETA
You Pay:
$99.95
Kupo KS-081 Quick Release Adapter Male Top Mount (1/4"-20)
- Knurled Locking Wheel
- Fits Kupo Quick Release Adapter
Usually ships in 8 - 12 weeks
You Pay:
$13.95
Kupo KS-049 Scraper With Baby 5/8"(16mm) Stud
- Stiff-Bladed Putty Knife
- Built-in 5/8" Stud
- Steel & Plastic
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Manfrotto FF3276 Steel Safety Cable
Recommended to avoid accidental falling of equipment - 350mm long
Special Order
Contact us for an ETA
You Pay:
$39.95
9.SOLUTIONS Tilt Adapter
- Friction Lock Disc
- Load Capacity: 35 kg
- 5/8" Pin and Receiver
- Works Well with Optional VESA Mounts
Usually ships in 4 - 6 weeks
You Pay:
$99.95
Avenger D400 4.5" Grip Head with Junior Pin
Aluminium Alloy Construction, 1 1/8" Junior Pin, 1 1/8" Receiver
Special Order
Contact us for an ETA
You Pay:
$229.00
Avenger F830 Baby to Junior Swivel Pin
Zinc-Plated Steel Construction, 5/8" Receiver, 5/8" Pin
Special Order
Contact us for an ETA
You Pay:
$169.00
Matthews MICROgrip Head
- Diameter is Only 1.25" (32mm)
- All the Features of a 2 1/2" Griphead.
- Ideal for Tabletop and Miniature Work.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Kupo KS-033 5" Grip Pin (Old Style)
For use with 2.5" Grip Heads, Enlarged Base Prevents Slipping
Usually ships in 8 - 12 weeks
You Pay:
$18.95
Kupo KS-344 3/8"-16 ARRI-Style Anti-Rotation Tip for Rocks Arm
- Integrated Knurled Tightening Knob
- Rapid Release
Usually ships in 8 - 12 weeks
You Pay:
$69.95
Kupo KS-047 Baby Receiver Wall Plate
- Welded 5/8" Baby Receiver
- Measures 3.5 x 6" Base
- Can Also be Used as a Junior Pin
- Chrome-Plated Steel Construction
- 8 x Anchor Points
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KT-058 Strut Channel Adapter with 5/8'' Baby Pin (200kg Payload)
- Hang Lights or Pipe
- Suitable for 1.6" Strut Channels
- Load Capacity: 200kg
- Comes with 5/8" Baby Pin
- Made from Galvanised Steel
Usually ships in 8 - 12 weeks
You Pay:
$86.95
Marshall Electronics Wall Mount Plate for CVM-7 & CVM-11
Attach Any 1/4"-20 Articulating Arm to the Wall
Usually ships in 4 - 6 weeks
You Pay:
$35.95
Matthews Pin with Collar - 6"
- Small and Easy to Store
- Mount in a Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$61.95
CHAUVET CLP-25N Narrow Swivel Coupler Clamp
Narrow design fits between cross braces with ease, Made of aluminum
Usually ships in 2 - 3 weeks
You Pay:
$59.95
9.SOLUTIONS Mini Rigging Rod Set Nuts
- 2x Long Nuts
- 6x Finger Nuts
- 3/8" Thread
Usually ships in 4 - 6 weeks
You Pay:
$44.95
Avenger F1000 Pump Cup with Baby Swivel Pin
Rubber and Aluminum Alloy Construction, 5/8" Pin, Pneumatic Pump
Special Order
Contact us for an ETA
You Pay:
$219.00
Manfrotto 149 Adapter - 1/4"-20 Female Thread to 3/8" Stud
- Replaces #3084
- 2 cm long
- Convert to a 3/8" tubular stud
Contact us for an ETA
You Pay:
$24.95
Kupo 419 Super Grip Ball Head
- Load Capacity: 15kg
- 360° Rotation; 115° Pivot
- 3/8"-16 Male & Female Thread Mounts
- All-Axis Positive-Locking Ratchet Handle
- Chrome-Plated Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$61.95
Kupo KS-425 Super Knuckle Ball with 1/4"-20 Screw
- Can Be Mounted on Camera Cage
- Rubber Pad on Base, CNC Aluminium
- Part of Super Knuckle System
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KS-416 Super Knuckle Ball with 5/8" Baby Pin
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-406 Super Knuckle Hex Stud Ball for Convi Clamp
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Non-Twist Hex 5/8" Pin
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KS-404 Super Knuckle Ball with 1/4''-20 Male Thread
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$37.95
Kupo KS-415 Super Knuckle Ball with 5/8" Baby Receiver
- 26mm CNC Aluminium Ball
- Part of the Super Knuckle System
- Ball Connects Camera to Super Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$49.95
Kupo KCP-412 Super Grip Double Baby Receiver
- Super Grip Swivelling Ball Head
- 2 x 5/8" Receivers / 1 1/8" Spigots
- Ratcheting Locking Handle
- Tapped 3/8"-16 Holes for Storing Knobs
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kupo KCP-409 Super Grip Finger with 10" Steel Auger Spike
- Chrome-Plated Construction
- 5/8" Baby Receiver on Swivel
- Ratcheting Locking Handle
Usually ships in 8 - 12 weeks
You Pay:
$89.95
Kupo KCP-320 EZ Grip Twins
- 2 x 5/8" Baby Pins
- Pivots -45 to 90°
- Collar Rotates 360°
- Solid Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$78.95
Kupo KCP-410 5/8" Super Grip Finger
- Chrome-Plated Construction
- Ball Head with 5/8" Baby Pin
- 360° Rotation | 115° Tilt
- Ratcheting Locking Handle
Usually ships in 8 - 12 weeks
You Pay:
$99.95
Kupo KS-145 Baby Cheater Wall Plate
- 8 x Anchor Points
- Plate Size: 3.5 x 6"
- 3" Long Baby Pin
- Eliminates Barndoor Interference
Usually ships in 8 - 12 weeks
You Pay:
$68.95
Kupo KS-105 Swiveling Adapter with Quick Release Camera Mounting Plate
- Quick Release Camera Mounting Plate
- 1/4"-20 Camera Screw
- Double Ball Joint
- Ratcheted Handle
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KS-057 Offset Baby Wall Plate
- Screw/Nail to Wall, Ceiling, Apple Box
- 8 x Anchor Points for Mounting Plate
- 9" Long Post with Two 5/8" Top Studs
- Chrome-Plated; Plate Size: 3.5 x 6"
- Weight: 2.0 lb
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Kupo KS-070 Double 5/8" Female Adapter
- Changes 5/8" Male to 17mm Female Socket
- Female Adapter: 16 to 17mm
- Lightweight Aluminium Construction
- Length: 3"
Usually ships in 8 - 12 weeks
You Pay:
$31.95
Kupo KS-148 3-Way Baby Adapter
- Allows Mounting of 3 Lighting Fixtures
- 3 x 5/8" Male Baby Pins
- 1 x 5/8" Baby Receiver
- Transforms into Junior Stud
Usually ships in 8 - 12 weeks
You Pay:
$80.95
Kupo KS-346 5/8" Baby Stud Tip for Rocks Arm
- Female Threads on Top of Stud
- Stainless Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$42.95
Kupo KS-412 Super Knuckle Square AMPS Mounting Plate
- Part of Modular Accessory System
- Plate with Ball for Knuckle
Usually ships in 8 - 12 weeks
You Pay:
$48.95
Kupo KS-201 Junior Baby Adapter
- Welded 1-1/8" Junior Receiver
- Welded 5/8" Baby Receiver
- Solid Steel Construction
- V-Shape Design
Usually ships in 8 - 12 weeks
You Pay:
$73.95
Kupo KS-129 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread
- 3.5" Extra Long 5/8" Baby Stud
- 3/8"-16 Male Thread
- Lightweight Aluminium
- Knurled Finish Prevents Twisting
Usually ships in 8 - 12 weeks
You Pay:
$19.95
Kupo KCP-630 Junior Drop Down
- Lighting Mount for Use with Booms
- Maintains Constant Downward Angle
- Combo Junior Receiver Head
- Friction-Padded Swivelling 5/8" Baby Pin
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KS-001 3/8" Snap-In Pin
- Adapter for Use with Convi Clamp
- Chrome-Plated
- Hex-End Design Provides a Secure Fit
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-002 1/2" Snap-In Pin
- Adapter for Use with Convi Clamp
- Chrome-Plated
- Hex-End Design Provides a Secure Fit
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo KS-020 5/8" Compact Aluminum Snap-In Pin (Silver)
- Accessory for Kupo Convi Clamp
- For Use with DeSisti & Ianiro Fixtures
- High Tensile Aluminium Construction
- Designed to Prevent Unwanted Rotation
- Polished Silver Finish
Usually ships in 8 - 12 weeks
You Pay:
$15.95
Kupo KS-020B 5/8" Compact Aluminum Snap-In Pin (Black)
- Accessory for Kupo Convi Clamp
- For Use with DeSisti & Ianiro Fixtures
- High Tensile Aluminium Construction
- Designed to Prevent Unwanted Rotation
- All-Black Finish
Usually ships in 8 - 12 weeks
You Pay:
$15.95
Kupo 356-A2816 28mm to 16mm Reducer Adapter
- Converts 28mm Receiver to 16mm Receiver
- Reduces Junior Receiver to Baby Receiver
- Black Anodised Aluminium
Usually ships in 8 - 12 weeks
You Pay:
$16.95
Kupo KS-149 Baby Pin with 1/4"-20 Male Thread Adapter
- 5.5" Long Steel Baby Pin
- 1/4"-20 Male Thread
- 1/4"-20 Female Thread
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Kupo KS-115 Double-Ended Brass Spigot
- Made of Solid Brass
- Use with 5/8" Receivers Like Convi Clamp
- Integrated 1/4"-20 Mounting Thread
- Knurled Neck Enhances Ergonomics
Usually ships in 8 - 12 weeks
You Pay:
$32.95
Kupo KS-074 Long Double Stud (5/8")
- Double 5/8" Baby Stud
- Chrome-Plated Steel Construction
- Length: 4.9"
Usually ships in 8 - 12 weeks
You Pay:
$16.95
Kupo 5/8" Baby Stud with 1/4"-20 Screw Mount
- Length: 3.5"
- Mounts Accessories on Grip Gear
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Kupo 403 Ball Head w/ 1/4"-20 Female Thread
- CNC machined aluminium ball head
- 1/4”- 20 Female Thread
- 26mm diameter
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Inovativ Baby Pin System
- Machined from 6061 T6 Aluminium
- Rod Machined 6061 T6 Aluminium
- Anodised Black
- Clamp to any Upright Post
- Overtube Style Design
Contact us for an ETA
You Pay:
$589.00
Inovativ Baby Pin Bracket with Pin for Dual Bar
- Provides offset support for Dual Bar
- Add Monitor to Dual Bar
- Compatible with Baby Pin Accessories
- Connects to Bar with 3/8"-16 Screw
Contact us for an ETA
You Pay:
$169.00
Inovativ Baby Pin Attachment for Insight Monitor Mount System
- Single baby-pin
- Supports Compatible Receivers, Transmitters, Antennas & More
- Secures to Vertical System Bracket on Inovativ Insight
Contact us for an ETA
You Pay:
$149.00
Inovativ Corner Plug With Baby Pin For Apollo, Deploy & Center Mast Bracket
- Baby Pin is 6061 aluminium with clear anodise
- Corner Plug machined 6061 T6 aluminium and anodised orange
- For Apollo, Deploy & Center Mast Bracket
- Useful to mount Inovativ's DigiSystem Pro and Lite
Contact us for an ETA
You Pay:
$169.00
Inovativ 5/8" Baby Pin Mast Adapter
- Mount 5/8" Baby Pin to 1.75" Mast
- 48 cm of Height Adjustment
Contact us for an ETA
You Pay:
$539.00
Inovativ Dual Bar with Two Standard Baby Pins and Two Pro Monitor Mounts
- Mount Monitors and Accessories on Stand
- Allows you to mount multiple monitors to Inovativ Axis
- 3/8"-16 and 1/4"-20 Mounting Threads
- 2 x Monitor Mounts, 2 x Standard Baby Pins
- Mount up to 18 Optional Baby Pins
Contact us for an ETA
You Pay:
$1,499.00
Westcott Universal Stud
- 1/4"-20 and 3/8"-16 Male Threads.
- Double-Sided Stud.
- Brass Construction.
- For Mounting Lights and Modifiers.
Usually ships in 6 - 8 weeks
You Pay:
$33.95
9.SOLUTIONS Large Tube Mount
- Load Capacity: 20kg.
- Magnetic Quick Mount Receiver.
- Fits Round, Oval, and Square Tubes.
- Anti-Scratch Padding Tape.
Usually ships in 4 - 6 weeks
You Pay:
$83.95
Backscatter 1" Ball Mount Base for Double Handle Tray
- For Backscatter Double Handle Tray
- Use to Attach Light/Strobe Arms
Usually ships in 4 - 6 weeks
You Pay:
$42.95
Backscatter Flex Arm for Light & Motion Sola Lights (15cm)
- 6 Loc-Line Ball & Socket Joints
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
- Requires Sola Light Loc-Line Mount Kit
Usually ships in 4 - 6 weeks
You Pay:
$77.95
Backscatter Flex Arm with YS Adapter End (30cm)
- 12 Loc-Line Ball & Socket Joints
- For Attaching YS Style Mount Lights
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Backscatter Mini Flex Arm for Light & Motion Sola Video Lights (30cm)
- 12 Loc-Line Ball & Socket Joints
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
- Requires Sola Light Loc-Line Mount Kit
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Avenger F831 Baby Female Swivel with Ball
Zinc-Plated Steel Construction, Double Baby Female Attachments
Special Order
Contact us for an ETA
You Pay:
$229.00
Avenger F800 3.0" Baby Wall Plate (Chrome-plated)
Chrome-plated Steel Construction, 5/8" Baby stud
Special Order
Contact us for an ETA
You Pay:
$45.95
Avenger F301 Baby Wall Plate (Chrome-plated)
Chrome Steel Construction, Baby 5/8" Locking Receiver, 3.5 x 6.0" Base
Special Order
Contact us for an ETA
You Pay:
$89.95
Avenger F300 Junior Wall Plate (Chrome-plated)
Chrome Steel Construction, 1-1/8" Female Receiver
Special Order
Contact us for an ETA
You Pay:
$109.00