Light Stands & Mounting
Aputure LiteBase "200m" 2.8m Light stand
- Low weight
- Spring dampers
- Standard thread
- Operating height from 115 - 260cm
In stock
Ships today
You Pay:
$129.00
Aputure LiteBase 200S
- Low weight
- 1/4" thread
- Operating height from 80 - 190cm
- Rubber feet
In stock
Ships today
You Pay:
$83.95
Manfrotto 1005BAC Ranker Stand
Air cushioned aluminum stand with Quick Stack System -max height 270cm
In stock
Ships in 1 - 2 working days
You Pay:
$349.00
Impact 5/8" Snap-in Pin for Super Clamps (Black)
Used to connect a lighting fixture to a Super Clamp
In stock
Ships today
$16.95
You Pay:
$12.95
$16.95
Manfrotto 5001B Nano Light Stand
- 5 x Sections, 4 x Risers
- Lightweight Aluminum
- Compact When Folded
In stock
Ships in 1 - 2 working days
You Pay:
$199.00
Manfrotto 143A Magic Arm with Bracket
An articulating arm the will support up to 3kg
In stock
Ships in 1 - 2 working days
You Pay:
$329.00
Manfrotto 1052BAC Compact Stand
Lightweight stackable stand with 2 risers - max height 237cm
In stock
Ships in 1 - 2 working days
You Pay:
$259.00
Kupo CT-40MK 40" Riser C-Stand Turtle Base Kit (3m, Silver)
- Load Capacity: 10kg
- Max. Height: 296cm
- Min. Height: 134cm
- Weight: 6.9kg
- C-Stand with Removable Base
- 40" Grip Arm
In stock
Ships today
You Pay:
$349.00
$169.00
You Pay:
$99.00
$169.00
Ulanzi R094 Super Clamp with 6.6cm Ball Head Arm
- Mounts on Surfaces 1.3 to 6.1cm Wide
- 6.6cm Ball Head Arm, 1.5kg Load Capacity
- 360° Mini Ball Head on Both Ends
- 1/4"-20 & 3/8"-16 Mounting Studs
- Nonslip Clamp Pads
- Wing-nut Fasteners
In stock
Ships today
You Pay:
$30.95
Impact Light Stand, Black - 6' (1.8m)
One of the most economical light stands available
In stock
Ships today
You Pay:
$80.95
Matthews Junior Boa Weight Bag (4.5kg, Black)
Cordura nylon shell, with two wings
In stock
Ships today
$149.00
You Pay:
$114.00
$149.00
$129.00
You Pay:
$94.00
$129.00
SmallRig 2058 Super Clamp with 1/4" and 3/8" Thread (2pcs Pack)
Can be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, Lightweight and durable, Equipped with 1/4’’ and 3/8’’ threaded holes
In stock
Ships today
You Pay:
$19.95
BIGSOFTI Universal Clip Accessory Mount for BIGSOFTI ONE
- Lightweight Mount
- Cold Shoe Mounting Foot with 1/4"-20
In stock
Ships today
$27.95
You Pay:
$20.95
$27.95
Impact Super Clamp with Ratchet Handle
Versatile grip tool made of lightweight cast alloy
In stock
Ships today
You Pay:
$62.95
Manfrotto 035 Super Clamp without Stud
- Lightweight cast alloy
- Holds just about anything
- Mount on any tube 13 - 55 mm
- Jaw Opening of 1.3 - 5.3 cm
- Stud not included
In stock
Ships today
You Pay:
$80.95
Kupo CS-40MKB Master C-Stand 40" Riser Sliding Leg Kit (3.2m, Black)
- Load Capacity: 10kg
- Max.Height: 323cm
- Min. Height: 134cm
- Kit Weight: 9.5kg
- 40" Grip Arm
- 2.5" Grip Head
In stock
Ships today
You Pay:
$319.00
Avenger C339 Grab Clamp
Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
In stock
Ships today
$359.00
You Pay:
$188.00
$359.00
LITRA Magnet Mounts for LitraTorch
- Attach LitraTorch to Smartphones & More
- Metal Surface, Adhesive Backing
- Sticker Films Included for Safe Removal
In stock
Ships today
$17.95
You Pay:
$2.00
$17.95
Kupo 198AC Universal Stand (3.8m, Black)
- Maximum Load: 9kg
- Twin Leg Braces
- Aluminium Construction
- 5/8" Top Stud
- Air-cushioned
In stock
Ships today
You Pay:
$179.00
Fluotec Mounting Bracket with Stabilizer Arm for CineLight 120 Series
Available to order from Rubber Monkey Today.
In stock
Ships today
$519.00
You Pay:
$90.00
$519.00
Manfrotto 035C Super Clamp without Stud (Ratchet version)
- Securely mounted on any tube from 13 to 45 mm
- Equipped with ratchet handle
- Universal 1/4'' thread attachment
- Attachment is 5/8'' hexagonal socket
In stock
Ships today
You Pay:
$86.95
Kupo CT-20MKB 20" Master C-Stand Turtle Base Kit (1.7m, Black)
- 5.7' C-Stand with Removable Base
- 20" Grip Arm
- 2.5" Grip Head
- Load Capacity: 10kg
- Max. Height: 172cm
- Min. Height: 93cm
In stock
Ships today
You Pay:
$329.00
Phottix Stay-Put Sandbag II (Medium)
Holds up to 6 kg, Ships Empty, Double Zippered, Saddlebag Design.
In stock
Ships today
You Pay:
$35.95
Godox AD-S16 Light Stand
- The Durable and Compact folding design is easy to carry.
- The 1/4" Thread interface allows you easily mount a Flash Light, Softbox, reflector, Umbrella with a 1/4" adapter.
- Quick Release Locking System makes it more stability and easy to installation.
- Compatible with All Hot Shoe Flash Light, especially fits for Godox WITSTRO AD180 AD360 Speedlite.
In stock
Ships today
You Pay:
$47.95
Kupo CT-40M Master C-Stand with Turtle Base (3m, Silver)
- Load Capacity: 10kg
- Max Height: 3m
- Min Height: 1.34m
- Detachable Base
- 5/8" Stud
In stock
Ships today
You Pay:
$229.00
Phottix Saldo 395 Studio Boom Light Stand 395cm
Extended Height: 395 cm; Folder length: 114 cm; Minimum height: 132cm
In stock
Ships today
You Pay:
$249.00
Manfrotto 1004BAC Air Cushioned Master Stand
- Folds Flat, Stacks
- Three Risers
- Double-Braced Leg Base
- Aluminium Locking Collars
In stock
Ships today
You Pay:
$359.00
Kupo 070AC Mini Click Stand (2.1m)
- Load Capacity: 4kg
- Folded Length: 71cm
- Weight: 1.1kg
- Air-Cushioned
- 5/8" Stud
In stock
Ships today
You Pay:
$129.00
Kupo CL-30MKB 30" Master Series C-Stand Extended Kit (Black)
- Turtle Base
- Sliding Leg
- Max Load 10kg
- Quick Release
- Extra Arm
In stock
Ships today
You Pay:
$379.00
Manfrotto 420B Combi Boom Stand
A medium duty stand with counter weight - supports up to 9kg
In stock
Ships in 1 - 2 working days
You Pay:
$539.00
SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread
Mount onto cameras, lights, umbrellas and more
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$15.95
Phottix F-180 Light Stand (180 cm)
- Load Capacity: 8 kg
- Maximum Height: 180 cm
- Folded Length: 46 cm
- Flip Lock Releases
- Weight: 1.04 kg
In stock
Ships today
You Pay:
$58.95
Impact Empty Saddle Sandbag - 8kg (Black)
Used for securing the bases of light stands and set walls
In stock
Ships today
You Pay:
$54.95
You Pay:
$6.95
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships today
You Pay:
$82.95
Impact Telescopic Collapsible Reflector Holder
The Impact Telescopic Collapsible Reflector Holder is ideal for mounti
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$159.00
Manfrotto 143N Magic Arm without Bracket
- Meets leading Italian standards
- Robust aluminium supports < 3 kg
- Reaches up to 53cm for ultimate practicality
- Maximum flexibility
- Inbuilt locking lever
In stock
Ships today
You Pay:
$299.00
Ulanzi VIJIM LS09 Extendable Stand with Table Base
- Aluminium Telescopic Pole
- Smartphone Holder with Cold Shoe
- GoPro Adapter
- 360 Degree Ball Head
- 1.2Kg Metal Disc Base
- Protective Silicon Pad
In stock
Ships today
You Pay:
$57.95
Gravity Stands TLS 431 B Light Stand with Square Steel Base
- Square Base with 3-Position Mounting
- Two Handles for Easy Transport
- Maximum Height: 242 cm
- Load Capacity: 17 kg
In stock
Ships today
You Pay:
$299.00
Kupo CS-40MK Master C-Stand 40" Riser Sliding Leg Kit (3.2m, Silver)
- Load Capacity: 10kg
- Max.Height: 323cm
- Min. Height: 134cm
- Kit Weight: 9.5kg
- 40" Grip Arm
- 2.5" Grip Head
Usually ships in 8 - 12 weeks
$286.00
You Pay:
$259.00
$286.00
Matthews Apple Box Full (51 x 30.5 x 20.3 cm)
Smooth natural finish, Rounded cut-outs for easy placement
In stock
Ships today
You Pay:
$179.00
Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)
- For Super Clamp System
- Replaces #2907
In stock
Ships today
You Pay:
$18.95
Tether Tools Rock Solid "A" Clamp (2", Black)
- Ideal clamp pressure for light clamping and speedy application and removal.
- Jaw opening: 2″ (5cm).
- Nickel plated steel jaws.
- Heavy-duty tempered steel springs.
- Polyvinyl handles and tips.
- Point-of-pressure remains near jaw.
- Clamping Strength = 10KG / 22.7lbs.
In stock
Ships today
You Pay:
$19.95
Manfrotto 5002BL Nano Plus Stand (6.5')
- Load Capacity: 4 kg.
- Maximum Height: 196.8 cm.
- Minimum Height: 52.1 cm.
- Folded Length: 52.1 cm, Five Sections.
- Weight: 1.35 kg, Footprint: 91.95 cm.
In stock
Ships in 1 - 2 working days
You Pay:
$215.00
Kupo CS-20MK Master C-Stand with 20" Riser and Sliding Leg Kit (2m, Silver)
- 2m Master C-Stand with Sliding Leg
- 2-1/2" Removable Grip Head
- 20" Grip Arm with Hex Stud
- 2-1/2" Grip Head Fixed on Arm
In stock
Ships today
You Pay:
$339.00
Nanlite PavoTube II 6C Coupler
- 1/4 20" Male to Male Adapter
- Mount Multiple PavoTube II 6C's Together
In stock with supplier
Usually ships in 2 - 3 working days
$9.95
You Pay:
$8.00
$9.95
Kupo CL-40M 40" Master C-Stand With Sliding Leg and Quick Release System (3m, Silver)
- Load Capacity: 10kg, Sliding Leg
- Zinc Die-Casting, Steel Construction
- Max. Height: 312.9cm, Footprint: 37.4"
- 2 x Risers, 3 x Sections, 5/8" Stud
- Weighs 95cm
In stock
Ships today
You Pay:
$309.00
Manfrotto 269HDBU High Black Aluminium Super Stand (7.3m)
- Wide base
- Quick set up
- Double braced leg base
In stock
Ships in 1 - 2 working days
You Pay:
$979.00
Kupo CL-40MK 40" Master C-Stand with Sliding Leg Kit & 2.5" Grip Head (3m, Black)
- Load Capacity: 10kg, Sliding Leg
- Max. Height: 313.9cm, Footprint: 95cm
- 2 x Risers, 3 x Sections, 5/8" Stud
- 2.5" Grip Head, 40" Grip Arm
- Aluminium and Steel Construction
In stock
Ships today
You Pay:
$369.00
You Pay:
$33.95
Kupo CS-40MB Master 40" Riser C-Stand with Sliding Leg (3.2m, Black)
- For Mounting Lighting Equipment & Tools
- Turtle Base
- Two Telescoping Risers
- Zinc Alloy Casting on Base
- Fast & Easy Set-Up
In stock
Ships today
You Pay:
$259.00
Manfrotto 088 Thread Adapter
Converts a female 1/4 inch screw to a male 3/8 inch thread.
In stock
Ships today
You Pay:
$13.95
Manfrotto 013 Adapter Spigot
A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock
Ships today
You Pay:
$27.95
You Pay:
$67.95
GRAVITY LS TBTV 28 Lighting Stand with T-Bar (Large)
Large telescopic lighting stand with T-Bar
In stock
Ships today
You Pay:
$179.00
K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread
For Microphone Mounts and Stands
In stock
Ships today
You Pay:
$12.95
Kupo 226M Master Combo HD Stand (3.3m)
- Maximum Load: 40kg
- 3.3m Height
- Levelling Leg
- Steel Construction
- Spring Cushioned
- Multiple Mounting Options
In stock
Ships today
You Pay:
$339.00
Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread
- Allows Stand Mounting
- Spring-Loaded Locking Knob
In stock
Ships today
You Pay:
$16.95
Impact Air-cushioned Light Stand - Black 8' (2.4m)
4-section light support, with sure-twist section locks.
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$129.00
9.SOLUTIONS Savior Clamp with 5/8" Stud
- Load Capacity: 29.9 kg
- Weighs 0.45 kg
- 5.9 cm Jaw Opening
In stock
Ships today
You Pay:
$109.00
Manfrotto 148KN Reducing Bushing Set
Convert a 3/8 inch screw and a 1/4 inch female thread - 5 set
In stock
Ships today
You Pay:
$15.95
Avenger A2033L 10.75' C-Stand Grip Arm Kit (Chrome-plated)
Sliding Leg, Chrome-plated Steel Construction, 40" Main Riser
In stock
Ships in 1 - 2 working days
You Pay:
$689.00
Kupo 023AC Midi Pro Stand (Air-Cushioned, Black)
- Maximum Load: 5kg
- Maximum Height: 2.5m
- Minimum Height: 1m
- 3 x Sections
- Air-Cushioned
- Weighs 1.3kg
In stock
Ships today
You Pay:
$139.00
9.SOLUTIONS Savior Clamp
- Load Capacity: 30 kg
- Weighs 0.44 kg
- 60 mm Jaw Opening
- Accommodate odd shapes
In stock
Ships today
You Pay:
$99.95
Impact CA-102 Rapid Baby to 3/8" Male Threaded Adapter
For mounting of a light fixture, flash, or camera
In stock
Ships today
You Pay:
$26.95
Manfrotto 026 Swivel Adapter
An adapter with the ability to rotate - supports up to 2.5kg
In stock
Ships today
You Pay:
$89.99
Impact Multiboom Light Stand and Reflector Holder - 13' (4m)
Support a small or medium light head to a height of 13' (4 m)
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$269.00
Kupo CT-20MK 50.8cm Riser C-Stand Turtle Base Kit (1.7m, Silver)
C-Stand with Removable Base, 50.8cm Grip Arm, 6.35cm Grip Head
In stock
Ships today
You Pay:
$339.00
iFootage Spider Crab Vehicle Suction Cup VS-146
- For Use with Spider Crab Vehicle Mount
- Create Smooth Motion Shots on Vehicles
- 1/4"-20 & 3/8"-16 Screws/Thread Mounts
- 30 kg Maximum Payload
In stock
Ships today
You Pay:
$236.00
Kupo 023 Midi Pro Stand (Black)
- Maximum Load: 5kg
- Maximum Height: 2.5m
- Minimum Height: 1m
- 3 x Sections
- Weighs 1.3kg
- Aluminium Construction
In stock
Ships today
You Pay:
$119.00
Kupo CL-20MK 20" Master Series C-Stand Extended Kit (Silver)
- Turtle Base
- Sliding Leg
- Max Load 10kg
- Quick Release
- Extra Arm
Usually ships in 8 - 12 weeks
$339.00
You Pay:
$259.00
$339.00
Manfrotto 237HD Flexible Arm
A flexible arm designed to be used with the super clamp -18mm diameter
In stock
Ships in 1 - 2 working days
You Pay:
$109.00
SmallRig 4249 Super Clamp with ARRI Rosette Mount
- 14mm-55mm clamping range
- Features built-in 1/4"-20 threaded hole
- Made of aircraft-grade aluminium alloy
- Increased sturdiness and durability
In stock
Ships today
You Pay:
$56.95
9.SOLUTIONS Python Clamp with 5/8" Pin
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Pin
- 3/8"-16 (M10) Connection
In stock
Ships today
You Pay:
$77.95
Manfrotto 098SHB Short Wall Boom Arm without Stand
A two section boom that can mount to a wall - max length 1.2m
In stock
Ships in 1 - 2 working days
You Pay:
$419.00
Kupo CT-30MB Master 30" C Stand W/ Turtle Base (Black)
- Industry standard Junior base of 28mm
- 94cm Folded Length
- 227cm Extended Length
- 4kg Weight
- 10kg Load Capacity
In stock
Ships today
You Pay:
$269.00
Impact Female 1/4"-20 to Male 3/8" Thread Adapter
Brass female to male thread adapter
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$11.95
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Manfrotto 045 Background Triple Hooks
A set of two background paper holders for three Expan 046.
In stock
Ships in 1 - 2 working days
You Pay:
$129.00
Manfrotto MS0490C Carbon Fiber Nanopole Stand (198cm)
- Levelling Leg.
- Removable Column Can Be Used as Boom.
- Load Capacity: 1.5kg.
- Maximum Height: 198cm.
- Minimum Height: 50cm.
In stock
Ships in 1 - 2 working days
You Pay:
$379.00
Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female
- Converts 1/4"-20 Stud to 5/8" Baby Stud
In stock
Ships today
You Pay:
$8.95
Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver
- Eight Anchor Points
- Metal Locking Knob
- Chrome-Plated Steel Finish
In stock
Ships today
You Pay:
$39.95
GVM DM-604 Light Stand
For 50RS/520LS/520S/672S/896S/50SM/RGB-150S/LS-150D/R50R288/1200D
In stock
Ships today
You Pay:
$94.95
Impact Heavy-Duty Air-Cushioned Light Stand (9.5'/2.9m, Black - Set of 2)
- 2 x 9.5' (2.9 m) Air-Cushioned Light Stands
- Load Capacity: 22 lb (10 kg)
- Max. Height: 114"(290 cm)
- Min. Height: 48" (123 cm)
- Folded Length: 42" (106.7 cm)
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$299.00
Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads
- Double-Sided Stud
- Fits into Any 5/8" Receiver
In stock
Ships today
You Pay:
$10.95
Phottix Saldo 160 Light Stand Boom Arm 160cm
For use as a boom on any light stand
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$169.00
GVM Desktop Light Stand For GVM-GVM-Y30D160 & GVM-Y60D256
Available to Order From Rubber Monkey Today
In stock
Ships today
You Pay:
$56.95
Kupo 161MB Slider Stand (1.2m, Black)
- Load Capacity: 36kg
- Maximum Height: 115.1cm
- Minimum Height: 57.9cm
- Folded Length: 68.1cm
- Footprint: 80cm
- Dual Levelling Legs
Usually ships in 8 - 12 weeks
$389.00
You Pay:
$335.00
$389.00
Impact CA-106 Junior to Baby Pin Adapter
1 1/8" (28 mm) and 5/8" (16 mm) spigots
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$46.95
Impact Six Empty Saddle Sandbag Kit - 6.8 kg (Black)
Six-Pack Kit, Cordura Nylon, Rugged and Durable Assembly
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$209.00
Impact Rapid Baby to 1/4"-20 Male Threaded Adapter
For mounting of a light fixture, flash, or camera
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$23.95
Impact Empty Saddle Sandbag Kit, Set of 6 - 12 Kg (Black)
A set of 6 black, double zippered bags that ship empty
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$279.00
SmallRig RA-S280A Air-Cushioned Light Stand with Boom Arm
- Air-Cushioned Shock Absorber System
- Stainless Steel Adapter for Anti-Twist
- Anodised Flip Locks
- Rugged Aluminum Alloy Tubes
- Nylon Tipped Feet
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$179.00
SmallRig Air-Cushioned Light Stand
- 94 to 280cm Height Range
- 94cm Folded Length
- 120cm Footprint with Legs Extended
- 5/8" Pin with 1/4"-20 Screw
- Anti-Slip, Wear-Resistant Nylon Footpad
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$129.00
9.SOLUTIONS Baby Pin Set
Increase mounting utility to anything with a 3/8" thread
In stock
Ships today
You Pay:
$52.95
Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
Mounts Lights / Accessories on C-Stands
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$78.95
Kupo 838 Handcuff Clamp with T Handle (Silver)
- High Tensile 6061 Aluminium Extrusion
- SWL: 440lbs / 200kg
- TUV Approval
- Rig Heavy Luminaries Quickly & Effortlessly
In stock
Ships today
You Pay:
$49.95
Impact 1/4"-20 To 1/4"-20 Adapter Spigot
Male 1/4"-20 to male 1/4"-20 adapter
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$13.95
Impact Turtle Base C-Stand Kit - 10.75' (Chrome)
Comprised of a C-stand, 2.5" grip head and 40" extension arm
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$639.00
Titan Heavy Duty Metal Clamp (Grey)
- 4cm maximum clamping range
- Perfect for hanging backgrounds
- Metal construction
In stock
Ships today
You Pay:
$6.95
SmallRig 828 Double Head Stud with 1/4" to 1/4" thread
Available to order today
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$7.95
Uniden RDA71 Window Mount 1 Cup Bracket R3NZ / R7NZ
- Replacement windshield suction cup
- Extra mounting bracket
- Suction cup mount designed for the R7 radar detector
In stock
Ships today
You Pay:
$67.95
iFootage RB-A300 Cobra 2 Round Base Monopod
- Lightweight, Portable & Durable
- Rapid Deployment
- Tiny Footprint
- Multi-Purpose Support Solution
- Rapid Deployment
- Aquadrop Additional Support
Usually ships in 1 - 2 weeks
$163.00
You Pay:
$142.00
$163.00
9.SOLUTIONS 5/8" Rod Set (150mm)
- 1-Set of 5.9" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships today
You Pay:
$48.95
SmallRig 2220 Super Clamp
The jaw is fitted with rubber pads on the inside removing the wear and tear of the rod it clamps on. The clamp can open 10 to 55 mm.
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$47.95
Manfrotto Cold Shoe Tilt Head
- Supports up to 4.4 lb, Wide Tilt Range.
- Ideal for Speedlites & Small LED Lights.
- Knurled Tightening Ring, 5/8" Receiver.
- Attaches to Anything with 5/8" Stud.
- Spring-Loaded System.
In stock
Ships in 1 - 2 working days
You Pay:
$116.00
Gravity Leveling Leg for Loudspeaker and Lighting Stands
- Continuously variable leveling leg
- For nearly all tripod speaker and lighting stands
- Compensates for uneven surfaces, steps, and stairs
In stock
Ships today
You Pay:
$23.95
Manfrotto 244 Variable Friction Magic Arm with Camera Bracket
- Meets high Italian standards
- Stretches 53 cm in length
- Secure locking function
- 035 Super Clamp to add more accessories
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$339.00
Impact Scissor Mount for Drop Ceilings
Enables attachment of small lights and accessories to the grid
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$29.95
SmallRig Crab-Shaped Clamp
- Mounts on Surface 1.2 to 6.6cm Wide
- 1/4"-20 & 3/8"-16 Mounting Threads
- 3.5kg Load Capacity, Rubber Padding
- Large Thumb-Lever Fastener
- Aluminium & Stainless Steel Construction
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$32.95
Impact 40" Extension Grip Arm (Silver)
Large T-Handle, Universal 2.5" Grip Head, 5/8" Diameter Bar
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$129.00
Impact 3/8" and 1/4"-20 Adapter Spigot
Convert an accessory with a female thread to a male thread
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$17.95
Impact Baby Triple Header
- Five Welded Steel Baby Pins
- 5/8" Receiver
- Chrome-Plated Steel Construction
- Multiple Mounting Options
- Combo 1-1/8" Pin / 5/8" Receiver
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Kupo KCP-241 40" Hex Grip Arm with Big Handle (Silver)
- Baby Hex Pin Connection
- Non-Slip Surface
Usually ships in 8 - 12 weeks
$93.00
You Pay:
$68.95
$93.00
Impact SRP-113 Long Double Stud 5/8"
Ideal for use with super clamp or other grip and mounting accessories
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$17.95
Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads
Features both 1/4"-20 and 3/8" male thread sizes
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$25.95
Impact BHE-104 Camera Platform for Flex Arm
Supports lightweight cameras up to 1 lb on the Impact Flex Arm
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$33.95
Manfrotto 122B Adjustable Pole for Backlight Stand (53-85cm)
- Replaces old catalog #3368
- Two sections
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$129.00
Manfrotto 1051BAC Air Cushioned Compact Stand
Lightweight stackable stand with 3 risers - max height 211cm
In stock
Ships today
You Pay:
$239.00
Impact CA-111 5/8" Male to 1/4"-20 Male Screw Adapter
Allows you to mount an accessory onto a 5/8" female stand
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$12.95
Impact Small 3/8" Female Threaded Adapter to 1/4"-20 Male Threaded Post
Brass female to male thread adapter
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$18.95
Impact Standard Stud for Super Clamp with 3/8" Male Threads
Used to mount cameras and other accessories onto the Super Clamp
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$13.95
Manfrotto 244 Micro Friction Arm Kit
A solid and highly dependable photo variable friction arm that comes with an Anti-Rotation Attachment and Nano Clamp.
Special Order
Contact us for an ETA
You Pay:
$319.00
Manfrotto 175 Spring Clamp
A multi-purpose clamp that can grip 40mm to 5mm
In Stock
Usually ships in 2 - 3 working days
You Pay:
$52.95
Manfrotto 143BKT Camera Platform Bracket
A replacement camera platform for the magic arm.
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$62.95
You Pay:
$5.95
Manfrotto 196AB-2 Articulated Arm
A 2 section articulated arm with bracket that can support up to 1.5kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$179.00
Kupo CS-20M Master 20" Riser C-Stand with Sliding Leg (2m, Silver)
- Sliding "Lazy Leg"
- Load Capacity: 10kg
- Maximum Height: 2m
- Minimum Height: 91cm
- 3 x Risers
- 5/8" Stud
In stock
Ships today
You Pay:
$229.00
Manfrotto 396B-2 Double Articulated Arm - 2 Sections With Camera Bracket
- Double articulated arms, to support loads up to 5 kg
- Very lightweight, weighs 0.64 kg
- Two sections articulated arm, max length 62.5 cm
- Sliding extension allow for flexible positioning.
- Supplied with camera bracket
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$309.00
Impact Six Empty Saddle Sandbag Kit - 6.8kg (Orange)
- Six-Pack Kit
- Cordura Nylon
- Rugged and Durable Assembly
- Double-Zipper Design
- Water and Weather-Resistant
- Webbed Cordura Handle
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$159.00
Manfrotto 014-14 Rapid Adapter
Allows mounting of equipment with a 1/4 inch threaded receptor.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$33.95
Impact Pipe Clamp with Baby Pin
5/8" Pin, Aluminium Construction, 100 kg Load Capacity
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Manfrotto 119 Adapter Spigot
Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$13.95
Manfrotto 035RL Super Clamp with Standard Stud
- Replaces #2900
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$119.00
Impact Hex Stud Grip Head with Super Clamp
- 2.5" Hex Stud Grip Head
- Super Clamp with Ratchet Handle
- Aluminium Alloy Construction
- Integrated Hex Stud
- 5/8, 3/8, 1/8, and 1/16" Holes
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$119.00
Phottix Varos Pro M Multi-Function Flash Shoe Umbrella Holder
Supports up to 62 lb (28 kg), Female Threaded Insert, Metal Cold Shoe.
On Backorder
You Pay:
$53.95
Impact CC-106T Super Clamp with T-Handle
- Aluminium Alloy Construction
- 53mm Jaws
- Includes 5/8" Baby Stud
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$61.95
SmallRig 4379 RA-S200 Light Stand
- Adjustable height: 56-200cm
- Rotating knob and flip lock
- Made of aluminium alloy
- Strong, wear-resistant, anti-corrosion metal
- Storage bag for easy storage
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$80.95
Impact CC-128 Double Super Clamp
- Aluminium Construction
- Grips up to 55mm Diameter Poles
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Godox 213B Light Stand for S30 LED Light
- For S30 Focusing LED Light
- Maximum Height: 213cm
- Minimum Height: 51cm
- Reversible Leg Design
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$57.95
Nanlite Foldable Floor Stand for PavoTube T8-7X LED Tube Light
- Can Be Used to Mount Other Equipment
- Ergonomic Handgrip
- Legs Fold for Compact Storage/Transport
- Head Can Be Swivelled and Locked
Usually ships in 4 - 6 working days
You Pay:
$23.95
Manfrotto 396B-3 Double Articulated Arm with Bracket
A three section articulated arm with bracket that supports up to 4.5kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$419.00
Manfrotto Nanopole Stand With Removable Column
- Lightweight, strong & compact professional lighting stand
- Detachable column for two-in-one use
- Additional stability with hook for sandbag and levelling leg
- 16mm male top stud with 3/8” or 1/4” thread attachments
- Strong construction supports payloads of up to 1.5 kg
In stock
Ships today
You Pay:
$245.00
Kupo CL-30MK 30" Master Series C-Stand Extended Kit (Silver)
- Turtle Base
- Sliding Leg
- Max Load 10kg
- Quick Release
- Extra Arm
In stock
Ships today
You Pay:
$379.00
Matthews Century C+ Stand with Turtle Base and Grip Arm Kit 3.2m (Chrome)
- 40" (101cm) Main Section
- Detachable Turtle Base
- Two Risers
- 40" (101cm) Arm and Grip Head
In stock
Ships today
You Pay:
$699.00
Kupo CL-30M 30" (76.2 cm) Master C-Stand With Sliding Leg and Quick-Release System (Silver)
- Load Capacity: 10 kg
- Min. Height: 108.5 cm
- Max. Height: 244 cm
- Weight: 6.1 kg
In stock
Ships today
You Pay:
$299.00
Manfrotto 035WDG Wedge Inserts for Super Clamp (Set of Four)
- Wedge insert for Super Clamp
- Increases gripping strength and stability on flat surfaces
- Made of technopolymer
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$26.95
Avenger Roller 33 Folding Base Stand with Braked Wheels (Chrome/Black, 10.8')
Locking Wheels, Folding Legs, Three Risers, 5/8" Stud
In stock
Ships in 1 - 2 working days
You Pay:
$739.00
K&M 211/1 Two-Piece Telescoping Boom Arm with 5/8" Thread (Black)
- Two-Piece Telescoping Design
- 17.1 to 29.3" Adjustable Length
- T-Bar Locking Screw
- 5/8" Male Threaded Connector
- 5/8" Threaded Hole for Mic Stand
- Steel Construction with Plastic Handgrip
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$82.95
Impact Super Clamp with 5/8" Snap-In Pin
- Load Capacity: 15kg
- Brass Pin with 1/4"-20 Male Threads
- Black Aluminium 5/8" Hex Pin
- Jaw Range: 1.27 to 5.3cm
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$71.95
9.SOLUTIONS Savior Clamp Mini
- Load Capacity: 30 kg
- Weighs 135 g
- 30 mm Jaw Opening
In stock
Ships today
You Pay:
$79.95
Westcott Mini Boom Arm & Weight Bag
- 79 to 145 cmTelescoping Aluminium Boom Arm
- Supports up to 5kg at Full Extension
- Pivoting Mount with Textured Surface
- Variable-Position Spigot Receptacle
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$229.00
Manfrotto 147 Adapter Spigot 3/8" + 1/4"
A brass spigot with a 3/8 inch and a 1/4 inch screw.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$12.95
Manfrotto 196AB-3 Articulated Arm
An articulated arm with 3 sections that can support up to 1.0kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$239.00
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships today
You Pay:
$499.00
Kupo CT-20M Master C-Stand with Turtle Base (50cm, Silver)
- Load Capacity: 10kg
- Max Height: 1.73m
- Min Height: 93cm
- 3 Sections
- Two Spring-Loaded Legs
- Zinc Alloy Base
In stock
Ships today
You Pay:
$259.00
Tether Tools Rock Solid Master Articulating Arm
Fully adjustable arm designed for positioning a tablet, small monitors, camera, light, flash, or many other accessories in the optimal position.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Impact 40" Extension Grip Arm (Black)
- Large T-Handle
- Universal 2.5" Grip Head
- 5/8" Diameter Bar
- Steel and Aluminium Construction
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$129.00
Manfrotto 420CSU Convertible Boom Stand with Sand Bag (4m)
- Steel Base
- 5 kg Load Capacity
- Sets up easily
- Boom telescopes from 1.1 to 2.1 m
In stock
Ships in 1 - 2 working days
You Pay:
$709.00
Manfrotto 231B Column Stand with Sliding Arm, Black (2.4m)
- Quick Set Up
- Sliding Arm Supports
- Multiple Fixture Support
- Removable Base
In stock
Ships in 1 - 2 working days
You Pay:
$749.00
K&M 21393 Crossbar
Crossbar Section, Use with Light & Speaker Stands
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$189.00
Impact 3" Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$39.95
Manfrotto 039 U-Hook Holders
A set of two U-hooks that are ideal for cross poles.
In stock
Ships today
You Pay:
$31.95
Phottix Professional Light C-Stand and Boom (12.5')
C-Stand, Grip Head, Boom Arm with Attached Grip Head.
In stock
Ships direct today
You Pay:
$519.00
Ulanzi FALCAM Geartree Desk Mount Stand (Drill Style)
Ulanzi FALCAM Geartree Desk Mount Stand (Drill Style)
In stock
Ships today
You Pay:
$269.00
Leofoto SC-01 72mm Suction Cup Mount
- Mount Camera or Smartphone on Moving Vehicle
- 1 kg Suggested Load
- 25 kg Maximum Load
- 1/4" Screw
In stock
Ships direct today
You Pay:
$99.95
You Pay:
$89.95
9.SOLUTIONS 5/8" Rod Set (250mm)
- 1-Set of 9.8" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships today
You Pay:
$59.95
9.SOLUTIONS 5/8" Closed Gag
Joins Two 5/8" Rods, Option of Joining a 5/8" Rod & 3/8" Rod
In stock
Ships today
You Pay:
$94.95
9.SOLUTIONS Double Joint Arm (Short, 360mm)
2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 30.8 lb
In stock
Ships today
You Pay:
$239.00
Manfrotto 118 Spigot with Double Male Thread
A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$15.95
Manfrotto LBAG90 - Light Stand Bag
Designed to carry Manfrottos Quick Stack light stands up to 90cm long
In stock
Ships in 1 - 2 working days
You Pay:
$129.00
Nanlite Pavotube Single T12 LED Tube Holder with 5/8" Receiver
- For Mounting Pavotube 15C and 30C
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$44.95
Impact Turtle Base C-Stand - 3.3m (Black)
- Detachable Turtle Base
- Twist & Release Locking Legs
- 101.6cm Main Section, 2 Risers
- Sturdy Chrome Steel Construction
- 5/8" Top Stud
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$469.00
Phottix Reflector Holder H for Circular Reflectors
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$78.95
Avenger Combo Alu Stand 20 with Leveling Leg (Black, 2m)
- Aluminium-Alloy Construction
- 2 Risers, 3 Sections
- Mount: 5/8" Male and 1/ 1/8" Female
In stock
Ships in 1 - 2 working days
You Pay:
$939.00
Manfrotto FF3512N86 Pantograph with Wire Cable
An option for lights to be suspended - supports up to 18kg
In stock
Ships in 1 - 2 working days
You Pay:
$1,089.00
Manfrotto 231ARM Sliding Support Arm
A quick release arm used to mount standard 16mm light fixtures.
In stock
Ships in 1 - 2 working days
You Pay:
$139.00
Manfrotto 104 Wheel Set with Brakes
A set of 3 braked wheels with a 75mm diameter.
In stock
Ships in 1 - 2 working days
You Pay:
$209.00
BenQ WiT Floor Stand Extension
- Transform WiT with Floor Stand
- Extension into sophisticated floor lamp
- Make WiT a contemporary addition
In stock
Ships direct today
You Pay:
$179.00
Leofoto SC-02 100mm Suction Cup Mount
- Mount Camera or Smartphone on Moving Vehicle
- 1.5 kg Suggested Load
- 40 kg Maximum Load
- 1/4" Screw
In stock
Ships direct today
You Pay:
$129.00
Ulanzi FALCAM Geartree Desk Mount Stand with C-Clamp
Ulanzi FALCAM Geartree Desk Mount Stand with C-Clamp
In stock
Ships today
You Pay:
$269.00
Manfrotto 142ABS - Stand Extension Pole, Black - 40.9" (1m)
- Extends the height of your light stand or may be used as a hand-held light or microphone boom.
- Aluminium construction, black, painted finish
- Manfrotto part number: 099B.
In stock
Ships in 1 - 2 working days
You Pay:
$199.00
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Avenger Baby Stand 17 with Leveling Leg (Chrome-plated, 5.75')
Steel and Aluminum Construction, 2 Risers, 5/8" Top Stud
In stock
Ships in 1 - 2 working days
You Pay:
$559.00
Impact 20" Grip Arm with Big Handle (Black Powder Coat)
- Rough Non-Slip Surface
- Aluminium and Steel
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$109.00
Impact LS-3SB Backlight Stand Base
Sturdy All-Steel Construction, Sets Up Quickly, 5/8" Baby Receiver
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$55.95
Tether Tools Rock Solid Baby Ballhead Adapter
Aluminum Construction, 16mm Receiver, Barrel Fits in Junior 28 mm Receiver, Oversized Tightening Knob
On Backorder
You Pay:
$88.95
Manfrotto 109 Caster Set
- For Stands with 22mm Leg Diameter
- Three casters
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$169.00
Manfrotto 088LBP - Small Adapter
- Replaces #3367
- Reducing bushing
In Stock
Usually ships in 2 - 3 working days
You Pay:
$21.95
Manfrotto 237 Flexible Arm
A flexible arm designed to be used with the super clamp -12mm diameter
In Stock
Usually ships in 2 - 3 working days
You Pay:
$69.00
Kondor Blue 5/8" Baby Pin Spigot Receiver to NATO Clamp Adapter (Raven Black)
- NATO Clamp
- Mounts on Light Stands and C-Stands
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Impact Empty Sandbag - 12.2kg (Black Cordura)
Used for securing the bases of light stands and set walls
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$62.95
Tether Tools Rock Solid A Clamp (Black, 1")
- Has Many Photographic and Video Uses.
- Holds Different Materials Securely.
- Polyvinyl Handles and Tips.
- Jaw Opens 1" Wide.
- Clamp Holds up to 11.8 lb.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$18.95
Impact Empty Saddle Sandbag - (2.2kg Capacity, Black)
- Water-Resistant Cordura Nylon
- Double Zippered
- Upper and Lower Nylon Hand Straps
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$36.95
Impact 6"/15cm Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$41.95
Manfrotto 173B Mini Boom Arm Only (Black)
- Black anodised aluminium
- No swivel mount or counterweight
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$94.95
Kondor Blue ARRI-Style 3/8"-16 Pin to 15mm Rod Clamp (Space Grey)
- Single 15mm Rod Bracket
- 3/8"-16 Anti-Twist Pins to 15mm Clamp
- Use for Lens Motor Gear or Accessory
- Requires 3/8"-16 or 1/4"-20 Bolt
- Mounts 15mm Rod without Baseplate System
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$58.95