Matthews
Matthews Butterfly/Overhead Fabric (12x12' Solid Black)
- 12' x 12' Solid Scrim
- Butterfly/Overhead Fabric
- 100 percent light blockage
- Eliminates light and reflections
- High quality duvetyne
Usually ships in 6 - 8 weeks
You Pay:
$769.00
You Pay:
$199.00
Matthews 169067 Cutter - 24x72"
- Protect Camera Lens from Flares
- Control Spill Light
- Stop Light from Reaching an Area
- Position on Top of Set Wall
- Use 2+ to Create a Box
Usually ships in 6 - 8 weeks
You Pay:
$379.00
You Pay:
$119.00
Matthews Matthbounce Floppy (48 x 48")
- Opens up to a White Reflector
- Hollow Steel Frame, Solid Steel Mount
Contact us for an ETA
You Pay:
$749.00
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
You Pay:
$27.95
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews C - Clamp with 2- 5/8" Baby Pins - 6"
- 2 Separate 5/8" Diameter Pins
- Clamp Jaw Offers a Maximum 6" Opening
- Allows Light Fixtures to Fit with Minimal Clearance
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Matthews Junior Double Riser Rolling Steel Stand 3m
- Designed for larger lighting fixtures, built with steel legs and riser assembly
- Provide a stable rolling base for Junior and midsize lighting fixtures
- Equipped with universal 1-1/8" Posi-V-Lock female with pop up 5/8" male stud.
- Load Capacity: 55 lbs (25kg)Folded Base: 12" (305mm)
Usually ships in 6 - 8 weeks
You Pay:
$1,439.00
Matthews Light/Heavy Triple Riser Kit Stand 3.8m
- Light / Heavy Triple Riser Light Stand
- Designed primarily for their use in lighting kits
- Brake shoe system for locking off the riser tubes
- Terminates with an industry standard 5/8" spud
Usually ships in 6 - 8 weeks
You Pay:
$529.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Hollywood Combo Steel Stand - 14.75' (4.5m)
- Steel Construction
- 4 Sections, 3 Risers
- Rocky Mountain Lazy Leg
- Junior (1-1/8") Receptor
- Baby (5/8") Spigot
Usually ships in 6 - 8 weeks
You Pay:
$1,139.00
Matthews Revenger Light Stand 3.3m (Black)
- Designed primarily for use in lighting kits
- Compact and lightweight
- Black finish aluminium stands
- 3 riser sections
- Weight: 4 lbs (1.8kg)
- Min/Max Height: 38"/128" (930mm/3130mm)
- Load Capacity: 22 lbs (10kg)
- Folded Base: 5" (127mm)
Usually ships in 6 - 8 weeks
You Pay:
$289.00
Matthews Junior Boom (5.6-10')
- Heavy Duty
- Junior (1-1/8") Mount
- Max Load Capacity 11.4 kg
- Extends to 3.3 m
- 18.6 kg Weight
Usually ships in 6 - 8 weeks
You Pay:
$1,899.00
Matthews Butterfly/Overhead Fabric 12x12' (White Artificial Silk)
- 12 x 12' White artificial silk
- Fits all standard 12x12 frames
- Softens and diffuses direct light and introduces a significant amount of ambient bounce
- Approximate light loss is 1.6 stops
Usually ships in 6 - 8 weeks
You Pay:
$639.00
Matthews 149061 Open End Scrim - 18x24" - Black Double Scrim
- Black Double Scrim Fabric
- Control & Manipulate Light
- Soften or Reduce Light Intensity without Noticeable Edge
- Red Webbing
- Flame Retardant
Usually ships in 6 - 8 weeks
You Pay:
$399.00
You Pay:
$3,599.00
Matthews The Slider Stand (3.8'/117cm)
- Load Capacity: 36.3kg
- Max. Height: 117cm
- Min. Height: 61cm
- Footprint: 94cm
Contact us for an ETA
You Pay:
$1,559.00
Matthews Medium Duty Maxi Kit Stand 2.8m (Black)
- Aluminium Construction.
Usually ships in 6 - 8 weeks
You Pay:
$419.00
Matthews 40" x 40" Floppy Top Hinge
- New Compact new 40” x 40” Size
- Practical Size for Transporting
- 3/8” Stainless Steel Tubing
Usually ships in 6 - 8 weeks
You Pay:
$639.00
Matthews RoadRags Kit (18 x 24")
- Two 18x24" Folding Frames
- Single, Double Scrims
- Artificial Silk, Flag, Case
Usually ships in 6 - 8 weeks
You Pay:
$919.00
Matthews Runway Base for Magic Stand
- Really low rolling stand base
- Designed to work with the Magic Stand
- Capable of handling any large light fixture mounted directly into its 1-1/8" Posi-V-Lock Junior Receiver
Usually ships in 6 - 8 weeks
You Pay:
$1,199.00
Matthews 149066 Black Single Open End Scrim (18 x 24")
- Open Ended
- Black Single Scrim Fabric
- Green Webbing
- Reduces Light Intensity
- Flame Retardant
Usually ships in 6 - 8 weeks
You Pay:
$289.00
Matthews Century C+ Turtle Base Grip Arm Kit (3.2m, Black)
- 40" (101cm) Main Section
- Removable Turtle Base
- 40" (101cm) Arm & Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$739.00
Matthews Open End Scrim White Artificial Silk 24x36"
- Open-Ended
- Made of spring steel
- Designed with a 3/8" pin
- Used to control or manipulate light
Usually ships in 6 - 8 weeks
You Pay:
$259.00
Matthews Hollywood Century C Stand Grip Arm Kit - 10.5' (3.2m)
40" Double Riser "C" Stand, Sliding Leg, 40" Arm with Griphead
Usually ships in 6 - 8 weeks
You Pay:
$639.00
Matthews 149058 Open End Scrim - 12x18" - Black Double Scrim
- Black Double Scrim Fabric
- Control & Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Flame Retardant
- Red Webbing Colour
Usually ships in 6 - 8 weeks
You Pay:
$229.00
Matthews Baby Boa Weight Bag (2.2kg, Black)
Weighs 2.2kg, Cordura nylon shell, with 2 wings
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthboard 40x40" (Silver)
This honeycomb reflector is lightweight and measures 40" x 40"
Usually ships in 6 - 8 weeks
You Pay:
$909.00
Matthews Apple Box Quarter (50.8x30.5x5cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
Usually ships in 6 - 8 weeks
You Pay:
$159.00
Matthews LB2 Location Baby Bracket
- 5/8" Knurled Baby Pin With Safety Hole
- 4x 1" Strap Pass Throughs
- Two 1/4" Mounting Holes
- Four Nail / Screw Holes
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Maxi Matthpole (Black, 99" to 187" / 252cm to 475cm)
- Expanding Casting
- 99" to 187" / 252cm to 475cm
Contact us for an ETA
You Pay:
$649.00
Matthews Round-D-Round Doorway Dolly
All-wheel steering will navigate tight 90 degree corners., Steering with the push/pull bar is possible from either end of this dolly
Contact us for an ETA
You Pay:
$9,399.00
Matthews Mini Matth Boom - Black
- Steel Construction
- A Hooked End to Hang a Sandbag Counterweight
- 3.6 kg Load Capacity
- 2 m at Full Extension
- Black Anodised Finish
Usually ships in 6 - 8 weeks
You Pay:
$639.00
Matthews Doorway Dolly
- Wheelbase of 28.25 without extended axle
- Overall length reaches 51"
- Platform size of 27.5" x 41.5"
- Load capacity is 362 lbs
- Pop-off wheels
Usually ships in 6 - 8 weeks
You Pay:
$7,649.00
Matthews Stainless Steel Dolly Track (Straight, 3m)
Designed to connect with other lengths and shapes of Matthews stainless steel dolly track
Contact us for an ETA
You Pay:
$2,699.00
Matthews Matthpole - Black - 4.5' - 8'
- Exapanding Casting
- Spring-loaded
- Clamp Various Lighting, Background, or Grip Equipment
- Extends from 4.5 to 8 ft (1.4 m to 2.4 m)
Contact us for an ETA
You Pay:
$659.00
Matthews Sky High Combo Triple Riser Steel Stand 4.7m
- Rugged design
- Allows levelling on uneven terrain
- Extends to a maximum height of over 4m
Usually ships in 6 - 8 weeks
You Pay:
$1,479.00
Matthews Hollywood Baby Junior Double Riser Stand 2.9m (Silver)
- Load Capacity: 13kg
- Maximum Height: 2.9m
- Minimum Height: 1.2m
- Footprint: 1m, Steel Construction
- 5/8" Pin, Steel Construction
Usually ships in 6 - 8 weeks
You Pay:
$909.00
Matthews Centipede II Camera Support Dolly
- Split-Carriage Design
- 8 Carriages with 4 Wheels per Carriage
- Smooth Tracking & Improved Contact
- Enhanced Pivoting
- Increased Wheel Hardness
Usually ships in 6 - 8 weeks
You Pay:
$8,649.00
Matthews Single Scrim Butterfly/Overhead Fabric (12x12', Black)
- 12' x 12' Solid Scrim.
- Butterfly/Overhead Fabric.
- 100 percent light blockage.
- Eliminates light and reflections.
- High quality duvetyne.
Usually ships in 6 - 8 weeks
You Pay:
$1,399.00
Matthews PN 377702 24-39" Telescoping Bazooka
- Provides Variety of Camera Mount Configurations Attached to Any Matthews Doorway Dolly
Usually ships in 6 - 8 weeks
You Pay:
$3,549.00
Matthews MERF Mini Extendable Reverse Stand
- Small, Robust Light Stand.
- Maximum Height: 2.2m
- Folded Length: 0.5m
- Load Capacity: 4kgs
Usually ships in 6 - 8 weeks
You Pay:
$229.00
Matthews Pivoting Yoke for Matthboard (Black)
Positive lock off Yoke made to hold Expendable Reflectors
Usually ships in 6 - 8 weeks
You Pay:
$419.00
Matthews Gobo Plate XL
- Two T-slots with V centering quickly secure grip head mounting
- 4 x ½” diameter holes for pear-snap placement prevent 4.5" grip head removal when loose, allowing plate to be safely captured when rigged
- 12 x 3/8” bolt holes and 20 each screw or nail holes secure the plate to set walls and lumber
- One 5/8” hole in the center of the plate to receive baby pins, 5/8” rods and mount half grid clamps
- Six evenly spaced markers on the edges allow for placement at a 45-degree angle without needing to measure it out
Usually ships in 6 - 8 weeks
You Pay:
$94.95
Matthews Rag Bag (Medium, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$52.95
Matthews Mini Slider Stand (38")
- Load Capacity: 80 lb
- Maximum Height: 38"
- Minimum Height: 20"
- Footprint: 19"
- Weight: 10 lb
Usually ships in 6 - 8 weeks
You Pay:
$769.00
Matthews Butterfly/Overhead Snap-A-Part Light Duty Frame - 12x12'
- 12'x12' Snap-A-Part Frame
- 1" square tubing
- "Quick Reverse Ear" which will enable the removal and reversal for quick 180-degree frame repositioning
- Work well indoors or in other controlled environments
Usually ships in 6 - 8 weeks
You Pay:
$2,749.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Senior Boa Weight Bag (6.8kg, Black)
Black Cordura nylon, Weighs 6.8kg
Usually ships in 6 - 8 weeks
You Pay:
$269.00