Matthews
You Pay:
$13.95
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
You Pay:
$27.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
You Pay:
$30.95
You Pay:
$34.95
Matthews Rag Bag (Small, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$48.95
Matthews Rag Bag (Medium, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$52.95
Matthews Pin with Collar - 6"
- Small and Easy to Store
- Mount in a Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$61.95
Matthews Putty Knife with 5/8" Pin
Available to Order From Rubber Monkey Today
Usually ships in 6 - 8 weeks
You Pay:
$83.95
$129.00
You Pay:
$94.00
$129.00
Matthews Gobo Plate XL
- Two T-slots with V centering quickly secure grip head mounting
- 4 x ½” diameter holes for pear-snap placement prevent 4.5" grip head removal when loose, allowing plate to be safely captured when rigged
- 12 x 3/8” bolt holes and 20 each screw or nail holes secure the plate to set walls and lumber
- One 5/8” hole in the center of the plate to receive baby pins, 5/8” rods and mount half grid clamps
- Six evenly spaced markers on the edges allow for placement at a 45-degree angle without needing to measure it out
Usually ships in 6 - 8 weeks
You Pay:
$94.95
$169.00
You Pay:
$99.00
$169.00
Matthews Rag Bag (Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$109.00
Matthews Junior Boa Weight Bag (4.5kg, Black)
Cordura nylon shell, with two wings
In stock
Ships tomorrow
$149.00
You Pay:
$114.00
$149.00
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Matthews Rag Bag (Extra-Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews LB2 Location Baby Bracket
- 5/8" Knurled Baby Pin With Safety Hole
- 4x 1" Strap Pass Throughs
- Two 1/4" Mounting Holes
- Four Nail / Screw Holes
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews MICROgrip Head
- Diameter is Only 1.25" (32mm)
- All the Features of a 2 1/2" Griphead.
- Ideal for Tabletop and Miniature Work.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Boa Bag (1.1kg, Black)
- Stabilises Stands, Columns, Booms, etc.
- 2 Sections
- Nylon Construction with Steel Shot
Usually ships in 6 - 8 weeks
You Pay:
$119.00
You Pay:
$119.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Baby Pipe Clamp with 5/8" Pin
- 5/8" pin for mounting
- Safety chain and pin
Usually ships in 6 - 8 weeks
You Pay:
$139.00
You Pay:
$139.00
Matthews 200mm Adapter Plate for Monitor Mount
- Steel Construction
- Weight 0.7 kg
- Converts 100m VESA Monitor Mount to 200 mm
- Allows Use with Larger LCD and Plasma Displays
Usually ships in 6 - 8 weeks
You Pay:
$139.00
You Pay:
$149.00
Matthews 149064 Open End Scrim - 24x36" - Black Double Scrim
- Black Double Scrim Fabric
- Control or Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Red Webbing Colour
- Flame Retardant
In stock
Ships tomorrow
$529.00
You Pay:
$149.00
$529.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Baby Boa Weight Bag (2.2kg, Black)
Weighs 2.2kg, Cordura nylon shell, with 2 wings
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
Full Price:
$159.00
Deposit:
$15.00
Matthews Apple Box Quarter (50.8x30.5x5cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
Usually ships in 6 - 8 weeks
You Pay:
$159.00
Matthews Apple Box Half (50.8x30.5x10.2cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
Usually ships in 6 - 8 weeks
You Pay:
$169.00
Matthews Apple Box Full (51 x 30.5 x 20.3 cm)
Smooth natural finish, Rounded cut-outs for easy placement
In stock
Ships tomorrow
You Pay:
$189.00
Matthews Open End Scrim - 18x24" (White Artificial Silk)
Open End Frames made of spring steel with a 3/8" pin and support
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Matthews 149052 Open End Scrim - 12x18" - Black Single Scrim
- Reduces Light Intensity
- Spring Steel
- Open End Frames
Usually ships in 6 - 8 weeks
You Pay:
$199.00
You Pay:
$199.00
Matthews MQ Mount for LED and Fluorescent Light Tubes
- For T-12 LED & Fluorescent Tubes
- Anti-Crush Jaws
- Compatible with all Grip Heads
- 1/4"-20-Tapped 3/8" Pin
Usually ships in 6 - 8 weeks
You Pay:
$209.00
You Pay:
$219.00
Matthews The Claw Rigging Clamp for Tube Lights
- Textured rubber to grip without surface damage.
- Lightweight with black finish
- Low-profile 5/8” pin mounts
- Magnets keep claw fingers open when mounting
Usually ships in 6 - 8 weeks
You Pay:
$219.00
Matthews 149058 Open End Scrim - 12x18" - Black Double Scrim
- Black Double Scrim Fabric
- Control & Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Flame Retardant
- Red Webbing Colour
Usually ships in 6 - 8 weeks
You Pay:
$229.00
Matthews MERF Mini Extendable Reverse Stand
- Small, Robust Light Stand.
- Maximum Height: 2.2m
- Folded Length: 0.5m
- Load Capacity: 4kgs
Usually ships in 6 - 8 weeks
You Pay:
$229.00
Matthews 169059 18x24" Flag
- Better Light Control
- Protect Camera Lens from Flares
- Rectangular
- Solid Black Fabric
- Position over Set Wall or Use 2+ to Create Box
Usually ships in 6 - 8 weeks
You Pay:
$239.00
Matthews 24x36" Flag
- Protects Camera Lens from Flares
- Control Spill Light
- Keep Light from Reaching an Area
Usually ships in 6 - 8 weeks
You Pay:
$249.00
Matthews Hollywood Head and Arm 40"
- Made of Stainless Steel
- T-Handles are ergonomically designed
- Comes with a Hollywood Grip Head attached to one end
- Strongest Grip Head in the business
- Additional Grip Head for positioning
Usually ships in 6 - 8 weeks
You Pay:
$249.00
Matthews Reverse Stand 7' (2.1m)
Best suited for location work, it can fold back on itself into a very compact package only 22.75" (58 cm) long.
Usually ships in 6 - 8 weeks
You Pay:
$249.00
Matthews Open End Scrim White Artificial Silk 24x36"
- Open-Ended
- Made of spring steel
- Designed with a 3/8" pin
- Used to control or manipulate light
Usually ships in 6 - 8 weeks
You Pay:
$259.00