Matthews

Matthews Super VATOR III Crank-Operated Light Stand

Load Capacity: 91kg
Max Height: 335cm
Min Height: 143cm
Folded Length: 171cm
Weight: 60kg

You Pay: $17,899.00

Matthews Max Menace Arm

Can be positioned flush against a wall, into or around a corner.
Wworks below the horizontal, eliminating the need for scaffolding.
Can be positioned parallel up to a 10' (305cm) ceiling.
16' (487cm) extension w/o adapter. 17.5' (533cm) extension w/ adapter.
Self-levelling head with Baby Pin and Junior Receiver.

You Pay: $16,599.00

Matthews Midi VATOR III Crank-Operated Light Stand

Load Capacity: 91kg
Max Height: 203cm
Min Height: 103cm
Folded Length: 123cm
Weight: 47kg

You Pay: $14,099.00

Matthews Low Boy VATOR III Double Riser Crank-Operated Light Stand

Load Capacity: 91kg
Max Height: 164cm
Min Height: 88cm
Folded Length: 104
Weight: 30kg

You Pay: $11,799.00

Matthews Crank-O-Vator III Crank-Operated Light Stand

Load Capacity: 91kg
Max Height: 343cm
Min Height: 144cm
Folded Length: 158cm
Weight: 41kg

You Pay: $11,299.00

Matthews Round-D-Round Doorway Dolly

All-wheel steering will navigate tight 90 degree corners., Steering with the push/pull bar is possible from either end of this dolly

You Pay: $9,399.00

Matthews Centipede II Camera Support Dolly

Split-Carriage Design
8 Carriages with 4 Wheels per Carriage
Smooth Tracking & Improved Contact
Enhanced Pivoting
Increased Wheel Hardness

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $8,649.00

Matthews Doorway Dolly

Wheelbase of 28.25 without extended axle
Overall length reaches 51"
Platform size of 27.5" x 41.5"
Load capacity is 362 lbs
Pop-off wheels

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $7,649.00

Matthews Dutti Dolly Rental Kit (Black)

20 x 24" Dolly Supports up to 800 lb
Low, < 2" from Ground Platform Height
75/100/150mm Bowls with 2.5" Riser
3 x Track Brackets, 2 x 3/8 to 5/8" Pins
Carrying Case

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $5,899.00

(1) review

Matthews CAM Tank Mount with Case

Designed for low shots, without taking away your ability to pan and tilt the camera.

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $4,999.00

Matthews Freedom Car Mount System

36.3 kg Weight Capacity

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $4,599.00

Matthews Dutti Dolly (Black, 51 x 61cm)

8 x In-line Skate Wheels
Low, < 2" Height from Ground
Supports up to 360kg
Works with or without Track
Use with Speed Rail or Hardware Tubing
Integrated Mitchell Mount

You Pay: $3,599.00

Matthews Dutti Dolly Aluminium Dolly Plate (Silver)

Machined out of 6061-T6 aluminuim.
Eight 3/8"-16 tapped mounts.
Mitchell Mount System.
4.6 cm (1.8") platform height.
Designed to accept any medium and large format camera systems.

You Pay: $3,599.00

Matthews Mini Max Boom

2.6m Maximum Arc from 4.2m High

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $3,599.00

Matthews PN 377702 24-39" Telescoping Bazooka

Provides Variety of Camera Mount Configurations Attached to Any Matthews Doorway Dolly

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $3,549.00

Matthews Stainless Steel Track (Curved 5.4m Section 50cm Diameter)

Manufactured from 304 alloy stainless steel welded tube.

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,799.00

Matthews Butterfly/Overhead Snap-A-Part Light Duty Frame - 12x12'

12'x12' Snap-A-Part Frame
1" square tubing
"Quick Reverse Ear" which will enable the removal and reversal for quick 180-degree frame repositioning
Work well indoors or in other controlled environments

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,749.00

Matthews Hot Buttons Dolly Wheels (Set of 4)

For 395100 or 395043 Dollies

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,699.00

Matthews Stainless Steel Dolly Track (Straight, 3m)

Designed to connect with other lengths and shapes of Matthews stainless steel dolly track

You Pay: $2,699.00

Matthews MINIVATOR II 3.6m Geared Stand

Load Capacity: 36kg
Max Height: 3.6m
Min Height: 1.3m
Footprint: 1.4m

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,449.00

Matthews Butterfly/Overhead Snap-A-Part Frame (8x8')

MSE 8' x 8' Snap-A-Part Frame
Heavy duty 1" Sq. Tubing
High-quality zinc finish
Durable and long-lasting finish

On Backorder what does this mean?

You Pay: $2,399.00

Matthews Road Flag II Kit (48 x 48")

2 x Folding Frames
Single Scrim
Silk
Flag
Silver Lame

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,299.00

Matthews Hi-Hi Overhead Roller Stand with Rocky Mountain Leg 6m

All steel tubes and legs
Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios
Wide bases for stability
Terminate in the new 4 .5" Grip Head
Foot castings which allow the upright storage of the stand when collapsed without any stress on the "all axis" locking casters

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,249.00

Matthews 3iSpreader

Machined Metal 3ispuds with Rubber Caps
Three Quick-Release Pins
Non-Corrosive, Scratch Resistant, Rust Resistant Coating
Adjustment Increments of 2.5" / 6.5cm

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $2,199.00

Matthews Stainless Steel Track (Straight 2.4m Section)

Stainless Steel Track, Straight 2.4m Section

You Pay: $2,199.00

Matthews Junior Boom (5.6-10')

Heavy Duty
Junior (1-1/8") Mount
Max Load Capacity 11.4 kg
Extends to 3.3 m
18.6 kg Weight

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,899.00

Matthews VeeBoxx Kit for Astera Titan (40")

For Astera Titan LED Tubes (40")
Panel Surface Area: 40 x 6"
Works with The Claw Tube Light Clamp
Three Front Diffusion Panels
Reflective Silver Interior

You Pay: $1,819.00

Matthews Mombo Combo Standard Stand 24' (7.3m)

Incredible height of 24' (7.3m)
Made of rectangular steel tubing and are internally reinforced with an MSE engineered gusset assembly
Strongest stand of its type in the business
Footprint: 74"
Folded Base: 6"

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,639.00

Mathews Cross Dovetail Plate

2-Layer Design, Incorporates 2 Plates
3/8"-16 & 1/4"-20 Threaded Holes
Spring-Loaded Post & Stationary Stop

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,589.00

Matthews The Slider Stand (3.8'/117cm)

Load Capacity: 36.3kg
Max. Height: 117cm
Min. Height: 61cm
Footprint: 94cm

You Pay: $1,559.00

Matthews Junior Steel Wheeled Stand 3.9m

Free Sliding Light Stand, Wheeled Light Stand
3.6m Max Height
Holds 25kg
1-1/8" Rec & 5/8" Stud
Weight 14kg

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,549.00

Matthews Sky High Combo Triple Riser Steel Stand 4.7m

Rugged design
Allows levelling on uneven terrain
Extends to a maximum height of over 4m

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,479.00

Matthews Junior Double Riser Rolling Steel Stand 3m

Designed for larger lighting fixtures, built with steel legs and riser assembly
Provide a stable rolling base for Junior and midsize lighting fixtures
Equipped with universal 1-1/8" Posi-V-Lock female with pop up 5/8" male stud.
Load Capacity: 55 lbs (25kg)Folded Base: 12" (305mm)

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,439.00

Matthews Medium Overhead Roller Stand 4m (Chrome)

Load Capacity: 40kg
Maximum Height: 4.2m
Minimum Height: 1.6m
Footprint: 1.5m
Weight: 16kg

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,439.00

(1) review

Matthews Single Scrim Butterfly/Overhead Fabric (12x12', Black)

12' x 12' Solid Scrim.
Butterfly/Overhead Fabric.
100 percent light blockage.
Eliminates light and reflections.
High quality duvetyne.

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,399.00

Matthews Low Boy Junior Double Riser Rolling Steel Stand 1.9m

Designed for larger lighting fixtures, built with steel legs and riser assembly
Provides a stable rolling base for Junior and midsize lighting fixtures
Equipped with universal 1-1/8" Posi-V-Lock female with pop up 5/8" male stud.
Load Capacity: 55 lbs (25kg) Folded Base: 12" (305mm)

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,379.00

Matthews RoadRags II Kit - 24x36" (45.7x91cm)

Two 24 x 36" Folding Frames
Single, Double Scrims
Artificial Silk, Flag, Case
Quickly Create Different Light Ratios or Block Light
Fits into Most Lighting Bags

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,219.00

Matthews Runway Base for Magic Stand

Really low rolling stand base
Designed to work with the Magic Stand
Capable of handling any large light fixture mounted directly into its 1-1/8" Posi-V-Lock Junior Receiver

Usually ships in 6 - 8 weeks what does this mean?

You Pay: $1,199.00