Matthews
Matthews Hollywood Century 3.2m C Stand Grip Head Kit with 101cm Grip Arm (Black)
- 40" (100 cm) Double Riser Black "C" Stand
- Sliding Leg
- 40" (100 cm) Arm with Griphead
- Allows Mounting & Placement of Gobos, Small Reflectors & Light Fixtures
Usually ships in 6 - 8 weeks
You Pay:
$619.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Apple Box Full (51 x 30.5 x 20.3 cm)
Smooth natural finish, Rounded cut-outs for easy placement
In stock
Ships tomorrow
You Pay:
$189.00
Matthews Floppy Cutter (48x48" Top Hinge)
The newly designed 90° Cutter frame makes it possible to position the instrument over the top of the set wall
Usually ships in 6 - 8 weeks
You Pay:
$579.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Matthews 24x36" Flag
- Protects Camera Lens from Flares
- Control Spill Light
- Keep Light from Reaching an Area
Usually ships in 6 - 8 weeks
You Pay:
$249.00
Matthews 169059 18x24" Flag
- Better Light Control
- Protect Camera Lens from Flares
- Rectangular
- Solid Black Fabric
- Position over Set Wall or Use 2+ to Create Box
Usually ships in 6 - 8 weeks
You Pay:
$239.00
Matthews Monitor Stand II (6.25')
- Load Capacity: 31.8 Kg
- Max Height: 75"
- Min Height: 29"
- Weight: 17 lb, 2 Sections
- 5/8" Pin
In stock
Ships tomorrow
$1,179.00
You Pay:
$914.00
$1,179.00
Matthews 149064 Open End Scrim - 24x36" - Black Double Scrim
- Black Double Scrim Fabric
- Control or Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Red Webbing Colour
- Flame Retardant
In stock
Ships tomorrow
$529.00
You Pay:
$149.00
$529.00
Matthews Medium Duty Kit Stand with Brake 2.3m (Black)
- Designed primarily for their use in lighting kits these stands are compact and light weight
- Ideal for assembling custom lighting kits or as a replacement
- Brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting the use of heavier fixtures
- Footprint: 32"/813mm
- Weight: 3.5lbs/1.5kg
- Min/Max Height: 30"/92.5", 76mm/2350mm
- Load Capacity: 20lbs/9kg
- Folding Base: 3"/76mm
Usually ships in 6 - 8 weeks
You Pay:
$279.00
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
You Pay:
$119.00
$169.00
You Pay:
$99.00
$169.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Junior Boa Weight Bag (4.5kg, Black)
Cordura nylon shell, with two wings
In stock
Ships tomorrow
$149.00
You Pay:
$114.00
$149.00
Matthews Grid Clamp with Grip Head (2.5")
- Double Hand Wheels, no Tools Required
Usually ships in 6 - 8 weeks
You Pay:
$319.00
Matthews Hi-Hi Overhead Roller Stand with Rocky Mountain Leg 6m
- All steel tubes and legs
- Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios
- Wide bases for stability
- Terminate in the new 4 .5" Grip Head
- Foot castings which allow the upright storage of the stand when collapsed without any stress on the "all axis" locking casters
Usually ships in 6 - 8 weeks
You Pay:
$2,249.00
Matthews Medium Overhead Roller Stand 4m (Chrome)
- Load Capacity: 40kg
- Maximum Height: 4.2m
- Minimum Height: 1.6m
- Footprint: 1.5m
- Weight: 16kg
Usually ships in 6 - 8 weeks
You Pay:
$1,439.00
Matthews Mombo Combo Standard Stand 24' (7.3m)
- Incredible height of 24' (7.3m)
- Made of rectangular steel tubing and are internally reinforced with an MSE engineered gusset assembly
- Strongest stand of its type in the business
- Footprint: 74"
- Folded Base: 6"
Usually ships in 6 - 8 weeks
You Pay:
$1,639.00
Matthews Hollywood 1.6m C-Stand with Sliding Leg Grip Head and 50cm Arm (Black)
- 50cm Riser
- Stands Will Nest, Saving Valuable Space
- 1 Sliding Leg for Use on Uneven Surfaces
- Grip Head & Arm to Position Flags, Etc.
Usually ships in 6 - 8 weeks
You Pay:
$629.00
Matthews Butterfly/Overhead Snap-A-Part Frame (8x8')
- MSE 8' x 8' Snap-A-Part Frame
- Heavy duty 1" Sq. Tubing
- High-quality zinc finish
- Durable and long-lasting finish
On Backorder
You Pay:
$2,399.00
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
You Pay:
$30.95
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Solid Frame Scrim White Artificial Silk 48x48"
Softens and diffuses direct light, and introduces a significant amount of ambient bounce.
Usually ships in 6 - 8 weeks
You Pay:
$499.00
Matthews MINIVATOR II 3.6m Geared Stand
- Load Capacity: 36kg
- Max Height: 3.6m
- Min Height: 1.3m
- Footprint: 1.4m
Usually ships in 6 - 8 weeks
You Pay:
$2,449.00
$129.00
You Pay:
$94.00
$129.00
Matthews Century C+ Stand with Turtle Base and Grip Arm Kit 3.2m (Chrome)
- 40" (101cm) Main Section
- Detachable Turtle Base
- Two Risers
- 40" (101cm) Arm and Grip Head
In stock
Ships tomorrow
You Pay:
$699.00
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships tomorrow
You Pay:
$509.00
Matthews Maxi Kit Steel Stand - 2.8m
- Compact & Lightweight
- Chrome Finish
- Load Capacity 11 kg
- 5/8" Stud to Mount
- Working Height Range of 0.9 m to 2.3 m
Usually ships in 6 - 8 weeks
You Pay:
$399.00
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Matthews 169067 Cutter - 24x72"
- Protect Camera Lens from Flares
- Control Spill Light
- Stop Light from Reaching an Area
- Position on Top of Set Wall
- Use 2+ to Create a Box
Usually ships in 6 - 8 weeks
You Pay:
$379.00
Matthews 169004 Cutter - 18x48"
- Rectangular
- Protects Camera Lens from Flares
- Control Spill Light
- Prevent Light from Reaching an Area
- Solid Black
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Matthews 149066 Black Single Open End Scrim (18 x 24")
- Open Ended
- Black Single Scrim Fabric
- Green Webbing
- Reduces Light Intensity
- Flame Retardant
Usually ships in 6 - 8 weeks
You Pay:
$289.00
Matthews 149052 Open End Scrim - 12x18" - Black Single Scrim
- Reduces Light Intensity
- Spring Steel
- Open End Frames
Usually ships in 6 - 8 weeks
You Pay:
$199.00
Matthews 149061 Open End Scrim - 18x24" - Black Double Scrim
- Black Double Scrim Fabric
- Control & Manipulate Light
- Soften or Reduce Light Intensity without Noticeable Edge
- Red Webbing
- Flame Retardant
Usually ships in 6 - 8 weeks
You Pay:
$399.00
You Pay:
$13.95
Matthews Rag Bag (Extra-Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Rag Bag (Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$109.00
Matthews Rag Bag (Small, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$48.95
You Pay:
$149.00
Matthews Putty Knife with 5/8" Pin
Available to Order From Rubber Monkey Today
Usually ships in 6 - 8 weeks
You Pay:
$83.95
Matthews Bottom Hinge Floppy (40 x 40")
- Opens up to a Black 40 x 80" Flag
- Fits Most "Wagons" or SUVs
- Hollow Steel Frame, Solid Steel Mount
- Ideal for Tight Spaces
Usually ships in 6 - 8 weeks
You Pay:
$599.00
Matthews Maxi Matthpole (Black, 99" to 187" / 252cm to 475cm)
- Expanding Casting
- 99" to 187" / 252cm to 475cm
Contact us for an ETA
You Pay:
$649.00
Matthews Baby Pin for 1" Square Tubing
- Fits 1" Square Tubing
- Supports 6x6 ft Frame Size
- Quick-Reverse Versatility
- Hand Screw Clamp
Usually ships in 4 - 6 weeks
You Pay:
$349.00
You Pay:
$34.95
Matthews Dutti Dolly Tripod Wing Kit
- Extends Dutti Dolly Platform
- Supports up to 76cm Diameter Tripod
- Tool-Free Assembly
- Screw-Knuckle Fasteners
Usually ships in 6 - 8 weeks
You Pay:
$1,189.00
Matthews Dutti Dolly (Black, 51 x 61cm)
- 8 x In-line Skate Wheels
- Low, < 2" Height from Ground
- Supports up to 360kg
- Works with or without Track
- Use with Speed Rail or Hardware Tubing
- Integrated Mitchell Mount
Contact us for an ETA
You Pay:
$3,599.00
Matthews VeeBoxx Kit for Astera Titan (40")
- For Astera Titan LED Tubes (40")
- Panel Surface Area: 40 x 6"
- Works with The Claw Tube Light Clamp
- Three Front Diffusion Panels
- Reflective Silver Interior
Contact us for an ETA
You Pay:
$1,819.00
Matthews Hot Buttons Dolly Wheels (Set of 4)
- For 395100 or 395043 Dollies
Usually ships in 6 - 8 weeks
You Pay:
$2,699.00
Matthews Scrim/Flag Box - 18x24"
Available to Order From Rubber Monkey Today
Usually ships in 6 - 8 weeks
You Pay:
$779.00
Matthews Rag Bag (Medium, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
You Pay:
$52.95