Mixars DUO MKII Professional 2-Channel Battle Mixer for Serato DJ

Product #59406
SKU DUO MK2
Usually ships in 2 - 3 weeks


Mixars DUO MKII Professional 2-Channel Battle Mixer for Serato DJ

Product #59406 | SKU DUO MK2
Usually ships in 2 - 3 weeks


Integrated Serato DJ, 8 x RGB Pads for Cue Trigger and Sampler, High-Pass and Low-Pass Filter, 3-Band EQ for Each Channel, Switchable Mic/Aux Input
Customer Reviews
0.0 (no ratings yet) Thanks for your rating!
Email me when stock arrives
Our Price $1,259.00

Delivery - $9.90*
2 - 3 weeks
Pickup AUCKLAND
2 - 3 weeks
Pickup WELLINGTON
2 - 3 weeks
*estimated shipping to Auckland

Overview

Mixars and Pro-X fade are proud to present Galileo Essential, our new crossfader installed in Mixars DUO MKII Professional 2-Channel Battle Mixer for Serato DJ

The key new feature is the new third generation XCP plastic conductive track technology.

The ‘essential’ fader offers amazing strength and durability with extra long life. The fader stem is thick and strong and is 8mm wide. The fader cap is sloped/triangular. The fader is also very easy to take apart to clean as you just pull the cover off.

The ‘essential’ extra long life conductive plastic tracks, (XCP) can be maintained with a specially formulated Pro X Fade ‘Ether’ lubricant which has been developed for the new tracks. Older versions of the PXF have a green PCB board and this new ‘essential’ has a black PCB board.

By improving the tracks using 3rd generation XCP tracks and together with the PXF ‘Ether’ lube, it means the fader will last longer between needing to be cleaned, in normal conditions. So now you can enjoy your fader for longer. The PXF ‘Ether’ has got lubricating and intense cleaning agents, which unlike the previous use of just Caig lube, doesn’t leave residual on the tracks, as when Caig was used on it’s own, when it dried, it left a layer which would attract the build up of dirt. With the new formula and track, Pro X Fade have significantly reduced this issue.

With the ‘essential’ fader, you also get the quality sound, firm control, smooth buttery feel and a warm, musical feel of a precisely configured fader which adds an almost harmonic tone to your scratching.”

Key Features

  • Official Serato mixer
  • Includes Serato DJ + DVS enabled
  • Integrated 24-bit / 96 kHz high quality audio interface
  • All controls send MIDI for mapping in any MIDI software
  • Mixars Galileo crossfader for precise cuts
  • Crossfader reverse, curve, and cut-in adjustments
  • Channel fader reverse and curve adjustment
  • Eight RGB rubber performance pads for control of cues and samples
  • Dedicated Sampler volume control
  • Looping control
  • Control for Serato DJ FX
  • Built in 2-port USB HUB
  • Analogue hi/low filter on each channel
  • Balanced XLR master output
  • Balanced TRS booth output
  • Combo Mic and Aux inputs on front panel

Specifications

Input Level and Impedance 1 kHz Input; Mic/Aux, Trim, Master at maximum
Line: 10 kOhms / -14 dBV (200 mV)
Phono: 47 kOhms / -50 dBV (3.16 mV)
Aux: 10 kOhms / -14 dBV (200 mV)
Mic: 5 kOhms / -54 dBV (1.99 mV) (Unbalanced)
USB: (N/A) / -3.4 dBV (96 K-782 TK. 16/1 kHz -20 dB)
Output Level and Impedance 1 kHz Input; Mic/Aux, Trim, Master at maximum
All: Nominal: ±1 dB; Limited: ±2 dB 
Master: 1 kOhm / 0 dBV (1 V) 
Balanced: 600 Ohms / 0 dBV (1 V) 
Booth: 600 Ohms / 0 dBV (1 V) 
Phones: 33 Ohms / -3 dBV (708 mV) 
Record: 1 kOhm / -9 dBV (400 mV)
Frequency Response Reference Input Level, Mic/Aux, Trim, Master at maximum
Line: 20 Hz to 20 kHz (Nominal: +1/-1.5 dB, Limited: +2/-3 dB)
Aux: 20 Hz to 20 kHz (Nominal: +1/-1.5 dB, Limited: +2/-3 dB)
Phono: 20 Hz to 20 kHz (Nominal: +1/-2 dB, Limited: +2/-3 dB RIAA)
Mic: 20 Hz to 20 kHz (Nominal: +1/-2 dB, Limited: +2/-3 dB)
Maximum Input Mic/Aux, Trim, Master at 9 o'clock. 1 kHz input level adjusted to output level <1% T.H.D with an A-weighted 20 kHz LPF
Line: Nominal: +15 dBV, Limited: +14 dBV
Aux: Nominal: +15 dBV, Limited: +14 dBV
Phono: Nominal: -21 dBV, Limited: -22 dBV
Mic: Nominal: -25 dBV, Limited: -26 dBV
Maximum Output Mic/Aux, Trim, Master at Maximum. 1 kHz input level adjusted to output level <1% T.H.D with an A-weighted 20 kHz LPF
Master Unbalanced: Nominal: +17 dBV, Limited: +16 dBV
Master Balanced: Nominal: +17 dBV, Limited: +16 dBV
Booth Output: Nominal: +17 dBV, Limited: +16 dBV
Phones: Nominal: +5 dBV, Limited: +4 dBV
S/N Ratio 1 kHz Input; Mic/Aux, Trim, Master at 12 o'clock with an A-weighted 20 kHz LPF (input shorted when no signal)
Line (0 dB Input): Nominal: 86 dB, Limited: 83 dB 
Phono (-36 dB Input): Nominal: 86 dB, Limited: 83 dB 
Aux (0 dB Input): Nominal: 86 dB, Limited: 83 dB 
Mic (-40 dB Input): Nominal: 79 dB, Limited: 75 dB
THD + N 1 kHz Input; Mic/Aux, Trim, Master at 12 o'clock with an A-weighted 20 kHz LPF
Line (0 dB Input): Nominal: 0.01%, Limited: 0.02%
Aux (0 dB Input): Nominal: 0.01%, Limited: 0.02%
Phono (-36 dB Input): Nominal: 0.02%, Limited: 0.05%
Mic (-40 dB Input): Nominal: 0.03%, Limited: 0.06%
Crosstalk 1 kHz Input; Mic/Aux, Trim, Master at 12 o'clock with an A-weighted 20 kHz LPF (input shorted when no signal)
Line (Each Channel Input at 0 dB): Nominal: 85 dB, Limited: 82 dB 
Phono (Each Channel Input at -36 dB): Nominal: 85 dB, Limited: 82 dB
Channel Separation (R/L) 1 kHz Input; Mic/Aux, Trim, Master at 12 o'clock with an A-weighted 20 kHz LPF (input shorted when no signal)
Line (Between L and R Channels at 0 dB Input): Nominal: 85 dB, Limited: 82 dB
Phono (Between L and R Channels at -36 dB Input): Nominal: 85 dB, Limited: 82 dB
AEQ Section Reference Input Level, Mic/Aux, Trim Master at maximum with a 20 kHz LPF
Low Band Reference Frequency: 70 Hz
Middle Band Reference Frequency: 1 kHz
High Band Reference Frequency: 13 kHz
Maximum Level: +12 dB; Nominal: ±1 dB, Limited: ±1.5 dB (applies to all bands)
Minimum Level: -25 dB; Nominal: ±1 dB, Limited: ±1.5 dB (applies to all bands)
Audio Card Support USB 2.0
24-bit / 96 kHz
Power Power Source: 100-240 VAC, 50/60 Hz
Power Consumption: 13 W
Dimensions (W x D x H) 10.4 x 14.5 x 4.1" / 265.0 x 369.0 x 104.1 mm
Weight 9.1 lb / 4.2 kg

In The Box

  • Mixars DUO MKII Professional 2-Channel Battle Mixer for Serato DJ
  • Power Cord
  • USB Cable

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review
Details
  • Product: Mixars DUO MKII Professional 2-Channel Battle Mixer for Serato DJ
  • Manufacturer: Mixars
  • Model: DUO MK2
  • SKU: DUO MK2
  • RM Product #: 59406