Mixars QUATTRO Professional 4-Channel Mixer and Controller for Serato DJ
This product is no longer available
Overview
16 RGB Pads with Hot Cue & Sampler Trig, Dual USB Audio Connections, Two Microphone Inputs, High-Quality Effects: 4 per Channel, MIDI Mappable
Description
Mixars QUATTRO Professional 4-Channel Mixer and Controller for Serato DJ, the older brother to the popular Mixars DUO. The QUATTRO is a Professional 4-channel mixer for a forthcoming release of Serato. The Mixars QUATTRO is Serato DJ & DVS enabled with dual USB audio connection, 16 RGB control pads, and effects selection.
Features
- 4-Channel Digital Mixer for SERATO DJ
- 16 RGB PADS with Hot Cue and Sampler control
- Dual USB audio connections
- 2 Microphone Inputs
- Dedicated 4 high-quality effects for each channel with a single knob
- Completely MIDI mappable
- Microphone Input
- Trim Output master volume
- 24-bit digital output
- Rugged metal construction
- Auto loop encoder
- Sampler switch
- Dedicated Sampler Volume
- Effects send/return
Specifications
Connectors | Inputs Channel 1: 4 x RCA (2 x Serato phono/line and 2 x line) Channel 2: 4 x RCA (2 x Serato phono/line and 2 x line) Channel 3: 4 x RCA (2 x Serato phono/line and 2 x line) Channel 4: 4 x RCA (2 x Serato phono/line and 2 x line) Mic 1: Combo XLR-1/4" / 6.35 mm TRS Mic 2: 1/4" / 6.35 mm TRS Return: 2 x 1/4" / 6.35 mm TRS Outputs Master 1: 2 x XLR Master 2: 2 x RCA Record: 2 x RCA Booth: 2 x 1/4" / 6.35 mm TRS Send: 2 x 1/4" / 6.35 mm TRS Headphones: 1 x 1/4" / 6.35 mm and 1 x 1/8" / 3.5 mm |
Input and Output Impedance | Input/Output Impedance and Sensitivity (1 kHz, AEQ Flat, Maximum Gain) Input Impedance and Reference Input Level: LINE: 47 kOhms / -14 dBV (200 mV) PHONO: 47 kOhms / -50 dBV (3.16 mV) MIC: 5 kOhms / -54 dBV (2 mV) RETURN: 47 kOhms / -20 dBV (100 mV) USB: -12 dBFS Output Impedance and Reference Out Level: Master (XLR): 600 Ohms / 0 dBV (1 V) ±2 dB (signal to signal 600 Ohms) Booth: 600 Ohms / 0 dBV (1 V) ±2 dB (signal to signal 600 Ohms) Master (RCA): 1 kOhm / 0 dBV (1 V) ±1 dB (load = 100 kOhm) Record: 1 kOhm / -9 dBV (355 mV) ±1 dB (load = 100 kOhm) Send: 1 kOhm / -14 dBV (200 mV) ±1 dB (load = 100 kOhm) Phone: 32 Ohms / -3 dBV (708 mV) ±1 dB (load = 32 ohms) |
Maximum Gain | Maximum Gain: (AEQ Flat, Reference Input Level, Maximum Gain) Master (XLR) / Booth Output: Line: +14 dB (at 600 Ohms) ±1 dB Phono: +50 dB (at 600 Ohms) ±2 dB Mic: +54 dB (at 600 Ohms) ±2 dB Return: +20 dB (at 600 Ohms) ±1 dB Master (RCA) Output: Line: +14 dB (at 100 kOhms) ±1 dB Phono: +50 dB (at 100 kOhms) ±2 dB Mic: +54 dB (at 100 kOhms) ±2 dB Return: +20 dB (at 600 kOhms) ±1 dB Record Output: Line: +5 dB (at 100 kOhms) ±1 dB Phono: +41 dB (at 100 kOhms) ±2 dB Mic: +45 dB (at 100 kOhms) ±2 dB Return: +11 dB (at 600 Ohms) ±1 dB Send Output: Line: +0 dB (at 100 kOhms) ±1 dB Phono: +36 dB (at 100 kOhms) ±2 dB Mic: +40 dB (at 100 kOhms) ±2 dB |
Maximum Input | (AEQ-flat, Mic, Trim, Master at 9 o'clock, adjust input 1 kHz level to output level less than 1% THD with A-weight/20 kHz LPF) Line: > +15 dBV, THD < 1% Return: > +9 dBV THD < 1% Phono: > -21 dBV THD < 1% Mic: > -25 dBV THD < 1% |
Maximum Output | Line Input, AEQ-flat, Mic, Trim, Master at Max, adjust input 1 kHz level to output level less than 1% THD with A-weighted / 20 kHz LPF) Master (XLR): > +17 dBV, load = 600 Ohms, THD < 1% Booth: > +17 dBV, load = 600 Ohms, THD<1% Master (RCA): > +17 dBV, load = 100 kOhms, THD < 1% Record: > +8 dBV, load = 100 kOhms, THD < 1% Send: > +3 dBV, load = 100 kOhms, THD < 1% Phone: > +4 dBV, load = 32 Ohms, THD < 1% |
Frequency Response | AEQ-flat, Phono at -60 dB / other reference input level, Mic, Trim, Master at maximum Line: 20 Hz to 20 kHz +2/-3 dB Mic: 20 Hz to 20 kHz +2/-3 dB Phono: 20 Hz to 20 kHz +2/-3 dB USB: 20 Hz to 20 kHz (48 kHz/24-bit-1 kHz, 20 Hz to 20 kHz .WAV) +2/-3 dB |
THD + N | (1 kHz input, Mic, Trim, and Master at 12 O'clock, with A-weighted / 20 kHz LPF) Line: 0.01% at 0 dB input Return: 0.01% at 0 dB input Phono: 0.02% at -36 dB input Mic: 0.03% at -40 dB input |
S/N Ratio | (1 kHz input, Mic/Aux, Trim, Master at 12 O'clock, with A-weighted / 20 kHz LPF, input short when no signal) Line: 81 dB at 0 dB input Return: 81 dB at 0 dB input Phono: 81 dB at -36 dB input Mic: 74 dB at -40 dB input |
Crosstalk | (1 kHz input, Mic/Aux, Trim, Master at 12 O'clock, with A-weighted / 20 kHz LPF, input short when no signal) Line: > 81 dB at each channel input at 0 dB input Phono: > 81 dB at each channel input at -36 dB input |
Channel Separation (R/L) | (1 kHz input, Mic/Aux, Trim, Master at 12 O'clock, with A-weighted / 20 kHz LPF, input short when no signal) Line: > 81 dB between L and R channel at 0 dB input Phono: > 81 dB between L and R channel at -36 dB input |
Equaliser | (Reference input level, Mic/Aux, Trim Master at Max with 20 kHz LPF) Line: Low Band: 70 Hz, +12 dB / -25 dB (±1 dB) Middle Band: 1 kHz, +12 dB / -25 dB (±1 dB) High Band: 13 kHz, +12 dB / -25 dB (±1 dB) Mic: Hi: 10 kHz, -28 dB (±2 dB) Low: 100 Hz, -28 dB (±2 dB) |
Channel Fader Kill | (0 dB 1 kHz reference input level, trim, master, at maximum with A-weighted / 20 kHz LPF) Channel Fader: > 91 dB at 1 kHz Crossfader: > 91 dB at 1 kHz |
Sensitivity Difference Between L & R | Level difference L&R (1 kHz, reference input level, Trim, Master at maximum with A-weighted / 20 kHz LPF) Line: ±1 dB Phono: ±1.5 dB |
Power | Power Supply: 100 to 240 VAC, 50/60 Hz Consumption: 20 W |
Dimensions (W x D x H) | 12.6 x 14.3 x 4.2" / 320.0 x 362.0 x 107.0 mm |
Weight | 11.8 lb / 5.4 kg |
In The Box
- Mixars QUATTRO Professional 4-Channel Mixer and Controller for Serato DJ
- USB Cable
- Power Cord
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Mixars QUATTRO Professional 4-Channel Mixer and Controller for Serato DJ
- Manufacturer: Mixars
- Model: QUATTRO
- SKU: QUATTRO
- RM Product #: 59408