IK Multimedia iRig Pre HD - Audio Interface with Mic Pre
Product #50866
SKU IP-IRIG-PREHD-IN
In stock Ships tomorrow
- show branch stock

IK Multimedia iRig Pre HD - Audio Interface with Mic Pre

Product #50866 | SKU IP-IRIG-PREHD-IN
In stock Ships tomorrow
- show branch stock
Product Features
  • For iOS, Android, Mac, PC
  • Studio-Quality Class-A Microphone Preamp
  • 24-Bit / 96 kHz
  • Adjustable Input Gain
  • Headphone Monitor Pre- or Post-Device


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
ONLINE
Ships tomorrow
AUCKLAND
In Stock
WELLINGTON
In Stock

The iRig Pre HD from IK Multimedia is a digital, high-definition microphone interface with an integrated Class-A microphone preamplifier, well suited for musicians, podcasters, journalists, videographers, and vloggers. Designed for iOS, Mac, PC, and Android devices, the iRig Pre HD connects between your device and your favourite microphone, offering 24-bit / 96 kHz resolution and an integrated headphone amplifier with a switchable pre-/post-device monitor setting, which allows you to monitor with zero latency and hear the processed signal from your device. There's even +48V phantom power to enable your prised, studio-condenser microphone. The IK Multimedia iRig Pre HD ships with a lightning cable, a USB cable, two AA batteries (for phantom power), a hook-and-loop strip, and a variety of professional software from IK Multimedia.

Key Features

  • MFi microphone interface certified by Apple “Made for iPhone and iPad”
  • Compatible with Mac and PC
  • Direct monitor switch for real-time monitoring or for playback
  • +48V phantom power (with 2 x AA batteries)
  • Class-A mic preamp with onboard gain control
  • On-board headphone output (works with the latest iPhone)
  • High-definition 24-bit convertors with up to 96kHz sampling frequency
  • Multi-colour LED for easy gain settings
  • Includes IK’s professional software and apps
  • Ultra-light and compact
  • Sleek and elegant design
  • Comes with USB and Lightning cables, 2 x AA batteries and a hook-and-loop mounting strip

Included Software and Content

  • iPhone/iPad
    • Mic Pack for VocaLive for iPhone/iPad: Unlock all the microphone models included in the Mic Room section of VocaLive
    • Pro Bundle for iRig Recorder for iPhone/iPad: Add professional effect such as Normalise, Three Band AEQ, Compressor, and Stereo Imager to iRig Recorder
    • Mic Room: Upgrade from FREE version to FULL version. Includes Real time microphone modelling app with 9 mic models
    • Microphones for Mic Room iOS: Velo 8 and Vintage Dynamic 20
  • Mac/PC
    • Mic Room: Microphone Modelling Module for T-RackS
Compatibility iOS Devices: iPhone 7 Plus, iPhone 7, iPhone SOE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required

Computer:
Mac: macOS 10.6 or later. One free USB port
Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port (ASIO4ALL is required on Windows 7 and 8 for low latency audio)

Android Devices: Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG to Micro-USB cable (sold separately) is required
Microphone Input Balanced female 3-pin, XLR (Pin 2, 3, 1: Hot, cold, ground)
Microphone Input Level From 6 mVpp to 1.4 Vpp
Microphone Input Impedance 2 kOhms
Gain Range 40 dB
Frequency Response 20 Hz to 20 kHz, ±1.5 dB
Input Noise -97 dB RMS, -105 dB(A)
Headphone Connector 1/8" / 3.5 mm TRS jack (Tip, Ring, Sleeve: Right, left, shield)
Headphone Level Headphone Level Control: Numbered thumb-wheel
Headphone Level Power: 100 mW into 50 Ohms
Device Connector Type micro-USB
LED Indicators Status / Audio level LED
The lower LED will show the audio signal level and the status of the unit as follow:
LED Off: iRig Pre HD is not connected to any power source
LED Bright Blue: iRig Pre HD is connected and a signal is present at the input of the channel
LED Green: The input signal of the corresponding channel is low
LED Orange: The input signal of the corresponding channel is OK
LED Red: The input signal of the corresponding channel is too high

Phantom power LED
The upper LED show the phantom power status:
Off: Phantom power is off
Steady Red: Phantom power is on
Low Battery: When the battery level approach to be low, all the (turned on) LEDs will fast blink every “2” sec. When the battery is at a very low level the audio out is muted and the LED continuously blinks
AD/DA Conversion 24-bit
Sample Rate 44.1, 48, 88.2, and 96 kHz
Power USB bus powered when used with a computer Battery powered (2 x AA included) needed for +48 V phantom only
Cable Length 60.0 cm (without batteries)
Dimensions (L x W x H) 110.0 x 39.9 x 34.0 mm
Weight 75.0 g

In The Box

  • Lightning to micro-USB Cable
  • USB to micro-USB Cable
  • 2 x AA Batteries
  • Hook-and-Loop Fastener Strip

Reviews

Own or use this product?
Give it a rating

In The Box

  • Lightning to micro-USB Cable
  • USB to micro-USB Cable
  • 2 x AA Batteries
  • Hook-and-Loop Fastener Strip

Reviews

Own or use this product?
Give it a rating
Product:
IK Multimedia iRig Pre HD - Audio Interface with Mic Pre
Manufacturer:
IK Multimedia
Model:
IP-IRIG-PREHD-IN
SKU:
IP-IRIG-PREHD-IN
RM Product #:
50866
Battery:
AA Included