SDI to component analog converter, 10-bit. 1 SDI input with 2 re-clocked, loop-through SDI outputs.
The D10C SDI to Analog Converter provides excellent quality 10-bit digital to analog conversion at low cost. The D10C is useful for D/A conversion, high quality monitoring, or adding an SDI input to VTRs, worlstations, or other analog video equipment. The D10C automatically works with component or composite SDI inputs in 625 or 525 line formats. Featuring one SDI input with two re-clocked, loop-through SDI outputs. The D10C also acts as a distribution amplifier/repeater. The D10C provides a component analog output for component SDI inputs (D1), a NTSC output for 525 line composite SDI inputs (D2,D3), and a PAL output for 625 line composite SDI inputs (D2,D3).
SDI (SMPTE 259M), 1x BNC
For Component Input Only (270Mb):
YPbPr - SMPTE, EBU-N10, Betcam, RGB, 3 x BNC
Sync, 1 x BNC
For Composite Input Only (142/177Mb):
NTSC/PAL 1 x BNC
Re-Clocked Loop-Thru SDI, 2 x BNC
Y +/- .25dB to 5.2MHz
C +/- .25dB to 2.5Mhz
Less Than 1% K Factor (2T)
- Power: 5VDC Regulated, 5 Watts, Power Supply Required (sold separately)
- Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)