(no ratings yet) Thanks for your rating!
SDI/HD-SDI to Analog Audio/Video Digital to Analog Audio and Video Converter
The HD10CEA converts SDI/HD-SDI video with embedded audio to analog video and 4 channel balanced analog audio. SD video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). HD video outputs can be configured as YPbPr or RGB. The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin “D” subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two loop-thru SDI/HD-SDI outputs.
SDI/HD-SDI w/Embedded Audio, 1x BNC
SD Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
- HD Video: YPbPr, RGB
- Audio: 4 Channel Balanced
Video/Audio Outputs on 25 Pin D Connector
2 SDI/HD-SDI Equalized Loop-Thru, 2x BNC
- User Controls
- Video Format
Audio Group 1 - 4
Audio Level (adjustable via switch selection):
+24, +18, +15, +12 dBu, Full Scale Digital
- Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
- Power: +5-18VDC, Regulated, 4 Watts, Power Supply Required (sold separately)
Reviews(no ratings yet)
Give it a quick rating:
Thanks for your rating!
Write a review