Booms & Wind Protection

• Fits Rode VideoMic GO II Microphone
• Pro-Grade Design
• Minimises Wind Noise and Plosives
• Open-Cell Foam and Synthetic Fur
• Wind Seal Blocks Unused Sockets

• Measures 180mm Long
• Standard Hole Diameter 18 to 20mm

• For the Rode NTG1 and NTG2
• Zip on Wind Muff
• Works with the Rode VideoMic

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• For Lavalier Mics
• Mount Mics Silently under Clothing
• For On-Camera Interviews

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• Reduce Clothing Noise

19 to 25mm Mounting Clips Hytrel Construction Integrated 3/8" Threaded Stand Adapter

• Fits Mics from 0.75 to 0.87" in Diameter
• Both On and Off Boom-Pole Support
• Adjustable Sliding Suspensions
• Built-In XLR Connector Holder
• 1/4"-20 and 3/8"-16 Threads
• 2-Prong Hinge Mount

• For MKE400 shotgun microphone
• Replacement windscreen

• For CVM-V30 LITE Microphone.
• Made of High-Quality Artificial Fur.
• Reduces Noise When Recording Outdoors.
• Fits over Most Small Camera Microphones.

• For Comica VM10II and Rode Video Micro.
• Made of High-Quality Artificial Fur.
• Reduces Wind Noise When Recording.

• For Interviews, Posts, VLOGs, Podcasts
• Use with Android Devices and Computers
• 3.5mm Headphone Jack
• Digital Audio at up to 24-Bit/96 kHz
• Omni Pattern for Consistent Voice Sound

• Mount Lavalier Mics to MoCap Suits
• Repair Screens or Key Out Small Objects
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle

• Repair Blue Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• Fits on C-Stands and Mic Stands
• Holds Boom Pole In Fixed Position
• Hands Free Operation
• Coated To Protect Your Boompole
• Extra-Wide Yoke Permits Easy Positioning

• Sticky Circles for Affixing Lav Mounts
• For RM11 Mounts and DPA Concealers
• For URSA MiniMounts
• Hypoallergenic
• For Use on Skin and Fabric
• Double Sided Peel-off Tabs

• Disguises Lav Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• For Use with Sennheiser MKE1 Lav
• For Use with Countryman B6
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• Neoprene Case
• Holds 34" (86.36cm) Closed Boompole with Mic
• Interior Accessories Pocket
• Protective Lining on Zipper Interior
• Adjustable Shoulder Strap

• Reduce Clothing Noise
• Super Plush Fur
• Wind Protection

• Repair Green Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• Mount Lavalier Mics to MoCap Suits
• Repair Screens or Key Out Small Objects
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle

• Repair Blue Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• Fits Vocal X Transmitter Built-in Mic
• Durable Clamp
• Reduce Noise & Ambience

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• Large Soft Circles; low profile wind protection for boom mics
• Great to use for rigging mics in cars where foam gags can dip into shot
• Made from the same fabric as Ursa Soft Circles

• Fits Vocal X Transmitter Built-in Mic
• Durable Clamp
• Reduce Noise & Ambience

• Reduce Clothing Noise
• Super Soft Fur
• Wind Protection

• 6 metal windscreens
• Provides extra protection
• For the Sony ECM-55

• 6 Overcover Fur Covers
• 30 Adhesive Stickies
• Reduces Lavalier Wind Noise
• Affixes to Skin or Clothing
• Black, Gray, and White

• For Lavalier Mics Under Clothing
• Minimise Clothing Rustle and Wind Noise
• Includes Stickies to Affix to Your Lav

• Reduce Clothing Noise
• Flat Sides Allow for Easy Attachment
• For Countryman B3 and Sennheiser ME 2
• For Sanken COS-11 and DPA 4060/4071
• Foam Material Can Be Cut

• Effectively Reduces Wind Noise
• Isolates Mic from Shock and Vibration
• Fits Mics from 20 to 22mm in Diameter
• For Shotgun Mics up to 32 cm Long
• Integrated Coiled XLR Cable

• Hides Lavalier Mic
• Reduces Clothing Rustle
• Soft Stretchy Moleskin
• Backed with Hypoallergenic Sticky Tape
• Apply to Skin or Clothing

• Lightweight Carbon Fibre Construction
• 3 x Telescoping Sections
• 1m to 2.5m Adjustable Length
• Internal Coiled Cable
• Bottom 3-Pin Male XLR Connection

• For Video and Electronic News Gathering
• Three Sections Smoothly Extend to 1.92 m
• Precision Balanced and Lightweight
• Anodised Aluminium Construction
• Intuitive Lock and Release System

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• 20dB of Wind Noise Attenuation

• Super Lightweight
• 2.6m Long When Fully Extended
• Carbon Fiber Tubes
• Includes Rigid Travel Case

• Set of 100 Sticky Pads
• Secure a Lav Mic
• Hypoallergenic

• Reduce Clothing Noise
• Flat Sides Allow for Easy Attachment
• For Countryman B3 and Sennheiser ME 2
• For Sanken COS-11 and DPA 4060/4071
• Foam Material Can Be Cut

• Great windshielding, in a smaller package
• Perfect for hand-held operations and interviews
• Optional Windjammer available for windiest conditions

• Compatible w/DSLRs & Compact Cameras
• Cuts Wind Noise on Built-in Microphones
• Also Fits Mobile Phones, iPads
• Set of 6

• Sticky Circles for Affixing Lav Mounts
• For Ursa Wire Rig
• 24mm Diameter

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• Foam windscreen is designed to avoid high-frequency roll-off
• Up to 20dB of wind noise attenuation
• UV and moisture resistant
• Excellent resistance to moisture and UV light

• Sticky Hypoallergenic Tape
• Small, Thin, and Low Profile
• Extremely Smooth Finish

• Effectively Minimise High Wind Noise
• Acoustically Transparent
• Works with Most Lavaliers

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• Customisable Furry Rectangle
• Protects Lav Mics Against Cloth Noise
• Protects Lav Mics Against Wind Noise
• Cut Your Own Shape to Fit Your Own Mic

• Furry Wind Cover for the VideoMic GO
• Minimises Wind Noise

• Suitable for Lavalier Mics
• Mount Mics Silently for Interviews
• Fix Small Personal Mics on Skin/Clothing

• Hides Lavalier Mic
• Reduces Clothing Rustle
• Soft Stretchy Moleskin
• Backed with Hypoallergenic Sticky Tape
• Apply to Skin or Clothing

• Suitable for Chroma Keying

• For XS Lav USB-C and XS Lav Mobile
• Foam Windscreen
• Protects Against Plosives
• Spare Part for XS Lav Mic

• For Use with Sennheiser MKE2 Lav
• Durable Plastic Construction
• Blends in with Beige Materials
• Leaves No Residue

• Minimizes Wind Noise
• Acoustically Transparent

• Sticky Hypoallergenic Tape
• Small, Thin, and Low Profile
• Extremely Smooth Finish

• Customisable Furry Rectangle
• Protects Lav Mics Against Cloth Noise
• Protects Lav Mics Against Wind Noise
• Cut Your Own Shape to Fit Your Own Mic

• Reduces wind noise in outdoor scenes
• Cold shoe mount for mini LED light
• Built-in cushions protect hot shoe

• Easy to rig beside buttons on shirts
• Perfect for rigging on the skin
• Moulded from hardened plastic

• For VideoMic Pro+
• Deluxe furry wind cover
• Designed to reduce wind noise
• Rubber base
• Open-cell foam with artificial fur

• Reduce Clothing Noise
• Reusable Soft Covers
• Wind Protection

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• Secures Cable on Rode Boompoles
• Pack of five
• Less handling noise
• Easier control

• Measures 99.1 to 381 cm
• Five Locking Sections
• Side 3-Pin XLR Connection
• Lightweight Graphite Design
• Captive-Collet Coupling System

• Easy to use
• High-performance windshield
• Reduces wind noise
• Rubber base
• Acoustically transparent artificial fur

• Measures 1.12 to 4.87m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Removable Bottom Bumper

• Avalon Series
• Measures 0.54 - 2.04 m
• 6 Locking Sections
• Internal Coiled Cable
• Right Angled XLR Connection

• Suitable for Lavalier Microphones
• Double-Sided Adhesive Pads
• Mounts Directly on Skin or Clothing
• Affixes Microphone Securely
• Hypoallergenic Fabric Material

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• Telescopic Boompole
• Rubber Collar Grips
• High-Quality 3-Pin XLR Cable
• Suitable for Boompoles
• Faux Fur Fuzzy Windscreen
• Provides Optimal Wind Noise Reduction

• Measures 1.1 to 5m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Includes KPCK16 Coiled Cable Kit

• For SGH-6/SSH-6 HWS6

• Measures 0.8m to 2.8m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Includes KPCK9 Coiled Cable Kit

• Quickly Identify Multiple Microphones
• For up to 4 Rode Microphones
• Fits Wireless GO and Wireless GO II
• Fits Lavalier II
• 4 x Colour-Coded Windshields
• 4 x Colour-Coded 3.5mm Jack Rings

• Measures 66 to 267 cm
• 5 Locking Sections
• Lightweight Graphite Design
• Captive-Collet Coupling System

• Measures 0.5 to 2.0 m
• Six Locking Sections
• Internal Coiled Cable
• Bottom XLR Connection
• Captive-Collet Coupling System

• Fur Windshield for Rode Blimp
• Minimises Wind Noise
• Acoustically Transparent

• Measures 65.8 to 267 cm
• Five Locking Sections
• Bottom 3-Pin XLR Connection
• Lightweight Graphite Design
• Captive-Collet Coupling System

• Length of 210 mm
• Diameter of 84 mm
• Suitable for the MKH416 microphones.

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• High-Quality Acoustic Foam
• Reduces Vocal Plosives
• Helps Reduce Wind Noise
• Protects Mic from Moisture and Dirt
• In Black, Red, and 2 Shades of Grey

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• Protection from Wind Noise
• Isolates From Shock and Vibration
• Fits NTG1, NTG2, NTG3, NTG4 and NTG4+
• Fits Any Shotgun Mic up to 32.4 cm
• Integrated Mogami Mic Cable

• For AT899 lavalier microphone
• Complete accessory kit
• Interchangeable holders
• Viper and magnet clips

• Easy to rig beside buttons on shirts
• Perfect for rigging on the skin
• Moulded from hardened plastic

Easy to rig beside buttons on shirts Perfect for rigging on the skin Moulded from hardened plastic

• Easy to rig beside buttons on shirts
• Perfect for rigging on the skin
• Moulded from hardened plastic

• Easy to rig beside buttons on shirts
• Perfect for rigging on the skin
• Moulded from hardened plastic

• 6mm width, re-useable & super soft
• Low Profile Sleeves for Hiding LAV Mics

• 6mm width, re-useable & super soft
• Low Profile Sleeves for Hiding LAV Mics

• 6mm width, re-useable & super soft
• Low Profile Sleeves for Hiding LAV Mics

• 6mm width, re-useable & super soft
• Low Profile Sleeves for Hiding LAV Mics

• Hides Lavalier Mic
• Reduces Clothing Rustle
• Soft Stretchy Moleskin
• Backed with Hypoallergenic Sticky Tape
• Apply to Skin or Clothing

• Open-Cell Foam Covered by Faux Fur
• Faux Fur Made of Natural Looking Fibre
• Provides Optimal Wind Noise Reduction
• Seamless Front Panel
• Fits Most Common Shotgun Microphones
• Fits Mics up to 0.89" in Diameter

• For DPA 6060/6061/6066 Subminiature Mics
• Fits 6000-Series Lav & Headset Mics
• Covers the Capsule Element
• All-Metal Construction

• For DPA Subminiature Microphones
• Covers the Capsule Element
• All-Metal Construction

• Unique thermoforming technology
• Padded interior
• Detachable shoulder strap
• Secured with two hook and loop straps

• Fits over Existing Foam Windscreen of Wavo
• Materials Specially Designed for Wind Noise Isolation

• 3 Foam Windscreens (1/4")
• 2 Universal Microphone Clips
• Fuzzy Windbuster

• For DPA Subminiature Microphones
• For Lavalier and Headset Mics
• High-Quality Acoustic Foam
• Reduces Vocal Plosives
• Reduces Wind Noise
• Protects Mic from Moisture and Dirt

• For Use with DPA 6060 and 6061 Lav Mics
• Reduces Wind and Breath Noise by -20 dB
• Durable and Scratch Resistant
• Snaps Securely into Place on Lav Mic
• Replaces Cap Supplied with Microphone

• Lightweight at 170g
• Carbon fibre construction
• Adjustable length and angle
• Internally foiled cable
• Telescoping boom
• Cold shoe/NATO compatible

• For DPA 6060, 6061, and 6066 Microphones
• Protects Microphone When Applying Makeup
• Eliminates Moisture and Dirt

• Allows use of long shotgun microphones
• Add-on component kit
• 265 mm blimp extension piece

• Interchangeable Adapter for Rode Blimp
• Mounts Blimp System onto Boompoles
• Compatible with any 9.5 mm Mount

• For Sennheiser MKE 400 Shotgun Mic
• Protects against Wind Noise
• Designed for Outdoor Applications
• Slips over Mic's Integrated Windscreen

• Conceal Rode smartLav and Lavalier Mics
• Absorbs Noise and Vibration
• Two Mounting Points for Redundant Miking
• Made of Skin-Safe Material
• Includes Skin-Safe Adhesive

• For MKE 1 Microphone
• Protects Against Plosives

• Pack of 3 MINIFUR-LAV Windshields
• Fur Windshield for Rode Lavaliers
• Minimises Wind Noise
• Acoustically Transparent

• Suitable for Shotgun Microphones
• Lightweight
• Extends from 0.85 m to 3 m
• Five Sections
• Intuitive Twist-Lock Mechanic

• Pliable Moleskin on Hypoallergenic Tape
• Reduces Clothing Rustle
• Camouflages Microphones
• 8 x 2.5cm Strips